Instructions - how to order an extract from the Unified State Registration Register, check the status of the application and convert the resulting xml sig file into human readable form

Extract from a single state register real estate is a certificate, which is a document confirming the right. To receive this extract, you need to order it on the government services portal at www.rosreestr.ru by filling out all the required fields.

There is a characteristic logo at the top of the site, here is a large number of sections, you can read news, learn about the latest changes in legislation.

It also provides information about a variety of services that relate to real estate, cadastral valuation, and geodesy. We need a section that is located slightly lower on the page - "Electronic services and services", and in it is the fourth field from the left, which is signed as “Obtaining information from the Unified State Register of Real Estate”.

Check the readiness of the statement online

The form is active, enter the APPLICATION NUMBER to check the readiness STATUS.

Convert xml sig files online

The form is active, UPLOAD XML SIG FORMAT files for ONLINE conversion.

USRN information request form - which fields to fill out, step by step

After you have visited the desired page, a form will open where you need to enter the data of our object. Based on this data, we will receive the extract itself. There are both required fields and fields for required information entry. To receive information, just fill in the required fields.

Select “object type: apartment”, below - “located at: region” - for example, Moscow. If this is a region, then accordingly select the Moscow region and locality. Next, indicate the name of the street - if it is an avenue, section or highway, select the required item from the list. Below we write the number of the house and apartment.

In the lowest field "Method of providing information" select the document type from the list - you can choose:

1. links to electronic documents,
2. paper document by post
3. paper document in the territorial department.

We are interested in electronic document- we receive it by mail, so we indicate the address in the line below, carefully and without errors, otherwise the letter will not arrive. After the address, enter the text from the picture and proceed to receive information by clicking the corresponding button below.

Information about the applicant, attached documents, and sending the request

After moving to the next page, in the “Type of applicant” field, select “individual”, in the “Applicant Category” indicate “Other person”, then enter the last name and first name of the applicant.

In the “type of document” field, select a passport (it is not necessary to write a series), enter the passport number and write the date of issue of the document. Below you can check the address again email box. At the very bottom, check the box and agree to the transfer of personal data.

Let's move on to the data request

On the next page we attach documents, if any. If there are no documents, go to the next step. On new page The data is being checked; before sending the request, we carefully check all previously entered information. If everything is correct, click “Send request”.

Checking the request status and paying for services

After this, a page will open informing you that your request has been registered, and the request number is also displayed here, by which you can later monitor the readiness of the extract .

You can follow the corresponding link. To do this, enter the text from the image and click “Check”. Next we will see the application status “Waiting for payment”. Just below, click “Specify the payment code”, copy the code in the email and paste it into the required field, and click “Proceed to payment”.

Payment for statements - choosing a method

On the next page, a field opens where you need to enter the payer’s full name and indicate his registration address, after which we proceed to payment after clicking the button below. On the new page you need to confirm the payment details, here you can order a bank receipt.

Payment Features - Payment Options

Money can be withdrawn:

• With bank card visa/mastercard;
• from a mobile phone account.

If we choose the second option, then enter the mobile number and pay attention to the size of the commission for each operator. When paying by credit card, a 2.3% commission is charged. Check the box “I accept the terms of the public offer” and click “Pay.” After this, the amount to be paid will be displayed, here you need to enter the number and other details of your bank card (if this method is selected), and click “Pay”, after which the application will be processed.

To your email address You will receive a letter informing you that your application has been accepted and payment has been made.

Checking the readiness status of the USRN extract

On the next page you can check the execution of the application, here we enter the text from the image, click "Get access key", indicate it by copying it from the letter, and click “Get file”. After this, the file will be downloaded to your computer as an archive. Next, we check the electronic document by selecting the appropriate item on the right side of the page.

We convert the USRN Rosreestr extract into a readable file xml sig

In the downloaded archive, in folder “1” there is an image file with a diagram of the apartment. We are interested in the text part of the document, which contains information about encumbrances and physical data of the owner.

On the page “Checking an electronic document”, which we went to, you need to select the files of the electronic document. Copy the .xml and .sig files that are in the archive to the desktop, indicate them for download and click “Check”. On the next page, the file can be viewed in text format by clicking on the link with the appropriate name.

A window appears in which the USRN information is displayed.

You can view the finished statement here:

• address,
• cadastral number of the object,
• date of assignment of the cadastral number,
• cadastral value,
• recipient of the statement, and all necessary information.

Often, when people come across the *.sig format, they wonder what it is. The second question that arises immediately after the first is: “How to open the sig extension?”

Expansion sig ( English signature is a digital signature file format. Most often used in documentation sent via email. For a simple user, this format may occur once or twice, but in a commercial environment it is not uncommon.

Despite the scary name and perhaps not entirely clear explanation, sig is a text file, just like txt or doc (docx). It contains information about the sender of the letter (usually the company name, sender's name, contacts, etc.), is edited by him (and therefore can also contain all sorts of quotes, advertising appeals, and anything else at all) and is attached to the letter automatically.

Although most people associate mail with mail and gmail, those who constantly interact with it on duty use special software systems - email programs. They are multifunctional and, among other things, open sig extensions. How to open a letter with a similar extension from such software? The most popular services are:

• Microsoft Outlook - included in the extended set office suite programs from Microsoft.
• Eudopa is a popular email client in the West with only an English interface. The advantage is that it works with both Windows OS and Apple MacOS.
• Mozilla ThunderBird, Opera Mail - developments mail programs from well-known browsers.

Which email program to choose is a topic for a new article. If you focus only on the criterion “how to open a sig extension”, any, even the simplest email client will do.

To create digital signatures, there is a program called "CryptoARM" - with free and paid versions. Through it, *.sig files are opened and created. For encryption, CryptoARM uses standard Windows crypto providers, so it is lightweight and simple. The software has no advantages over the method described below for the average person, but it will be of interest to novice cryptographers.

If you don't want to install a new program

Good old Notepad comes to the rescue - with this program, if desired, you can even open a picture (although its text encoding is unlikely to be to anyone’s taste), let alone text file*.sig.

How to open anything for free? "Notepad", of course! So digital signature files are opened, created, and edited through it. In the last two cases, the main thing is not to forget to enter the name of the corresponding extension after the file name when saving.

How to open the Rosreestr sig file?

A sig file is a document that contains an electronic digital signature to confirm its authenticity. It attaches to the end email or file. Let's look at how and how to open the sig file.

In general, there are two methods for viewing documents: digital signature- view it on your computer using a special application or open it using cloud service online.

To view files with digital signatures, you can use a regular notepad, mail client(for example, Microsoft Outlook) or a program for creating digital signatures, like CryptoARM.

It is also possible to convert a digitally signed file into PDF format, for example, using the PDF24 Creator utility, for more convenient viewing.

How to open a file with the sig extension?

Let's look at the easiest way to open it - through notepad:

After this, you can start working with the opened file.

How to open the sig extension online?

To determine the authenticity of a digital signature, you can go to the website Rosreestra. In the “Services” section we find the “Electronic Document Verification” function, upload the required document and immediately receive a response about its authenticity.

If you have any questions, leave them in the comments!

How documents from Rosreestr are opened

Dear friends, today we will try to view the Rosreestr XML file in normal form for further work with him. To carry out the operations from the next block, you will need Internet access, since we will use online services. Therefore, take care of this issue in advance. To begin with, we will briefly talk about what files are, perhaps with an extension unknown to you.

• An XML document is a structured database that includes some information that is then available to the user.
• A file with the SIG extension is a digital signature document to establish the authenticity of the previous one. Therefore, we cannot work without him.

But what does the following instruction give us? After all, XML can be opened in a simple notepad and it’s quite easy to find there necessary information. But what if you need to open an extract from Rosreestr XML and print it? Then you will need the following method to launch documents from federal service. Otherwise, you'll just be left with a bunch of codes and databases. But don’t be scared, it’s not that scary: the following actions very light, so you will achieve your goal in just a few clicks.

XML and SIG: how to open Rosreestr?

1. Now we will try to read the Rosreestr XML file in a normal format. First, you should make sure that you own two documents: in fact, yourself XML file and its digital signature in SIG format. Without the latter, you will not be able to view the information you need. Only after making sure that these two files are intact and safe, do we move on to the next point.
2. Now we go to the Rosreestr website using the link https://rosreestr.ru/wps/portal/cc_vizualisation to the electronic document verification page.
3. In this window, you will see two fields for inserting documents: one for the XML file and the other for the digital signature. Drag files from your computer with the left mouse button into the appropriate fields or use the “Select file” button opposite each item.

Inserting documents in Rosreestr

• We remind you that you cannot use the service of the federal service website without active connection to the Internet.
• It is recommended to use it as a browser Internet Explorer or Safari. Of course, other browsers will also allow you to perform these operations, but you will need to set some parameters. We will tell you more about them for each program below.
• IN Google Chrome the "Load insecure script" setting must be set, otherwise nothing will work.
• Open the browser Menu (three horizontal bars in the upper right corner) → Settings → Show advanced settings → Personal information → Content settings or enter chrome://settings/content in the browser address bar and press Enter. In the Java Script section, select Allow all sites to use JavaScript (recommended) or configure exceptions.

Allow all sites to use JavaScript

Friends, now you know how to open and read the Rosreestr XML document. To summarize the above, we can note the following:

• To work, you will need an active Internet connection.
• It is recommended to use Internet Explorer on Windows and Safari on MacOS as a browser for viewing pages.
• Make sure you have two types of data - a digital signature with a SIG extension and an XML document.
• After checking the files, you can not only view and save them, but also print them.

We hope that everything worked out and there are no questions left. Of course, don’t forget to share your opinion, impressions, personal experience in comments!

Rosreestr in normal form for further work with it. To carry out the operations from the next block, you will need Internet access, since we will use online services. Therefore, take care of this issue in advance. To begin with, we will briefly talk about what files are, perhaps with an extension unknown to you.

• An XML document is a structured database that includes some information that is then available to the user.
• A file with the SIG extension is a digital signature document to establish the authenticity of the previous one. Therefore, we cannot work without him.

But what does the following instruction give us? After all, XML can be opened in a simple notepad and quite easily find the necessary information there. But what if you need to open an extract from Rosreestr XML and print it? Then you will need the following method for launching documents from the federal service. Otherwise, you'll just be left alone with a bunch of codes and databases. But don’t be scared, everything is not so scary: the following steps are very easy, so you will achieve your goal in just a few clicks.

XML and SIG: how to open Rosreestr?

Conclusion

Friends, now you know how to open and read the Rosreestr XML document. To summarize the above, we can note the following:

• To work, you will need an active Internet connection.
• It is recommended to use Internet Explorer on Windows and Safari on MacOS as a browser for viewing pages.
• Make sure you have two types of data - a digital signature with a SIG extension and an XML document.
• After checking the files, you can not only view and save them, but also print them.

We hope that everything worked out and there are no questions left. Of course, don’t forget to share your opinion, impressions, and personal experiences in the comments!

However, in practice everything is not at all simple. Trying to open a clear XML file, we get a blank page. We get into the code - everything seems to be logical - a bunch of data in XML tags. We understand that the problem is that there are no design settings in the file itself. They must be loaded from an external resource... A specified file also refers to a group of files with settings for each section of the document. As a result, all browsers refuse to load all these files, seeing this as a gross violation of security policy.

And then the “dancing with a tambourine” begins: disable “protection against dangerous sites” in the browser settings; launch the browser with security features disabled; We are looking for additional services; we invent and write additional programs. The first time I encountered this problem, running Firefox browser with parameters for disabling protection. As it turned out, this decision lasted about a year. And suddenly this method stopped working. And on different computers and in different versions browsers.

To solve this problem once and for all, we had to study this issue in more detail. It turns out that a solution to the problem is available on the Rosreestr website itself. And there are even instructions there (only, at the time of writing this article, they are outdated - the design of the site has changed, and nothing can be done from the pictures in these instructions).

I will no longer torment you with thoughts and memories.

Solution

1. Go to the “Checking an electronic document” page on the Rosreestr website.

2. On this page there is a field “Electronic document (xml file)”. This is the field to indicate your file to upload. Click the "Browse..." button (in different browsers the name may be different). Select the desired XML file on your computer.

3. Having specified the required file, at the bottom of the form click the “Check>>” button.

4. When the page is refreshed, information about the downloaded file will appear next to the “Electronic document (xml file)” field, and next to it will be written “Display in human-readable format.” By clicking on this link, a new window will open in which your file will be in an understandable form.

Free legal advice:

More materials from this section

Comments

In that case, I would write to them technical support Rosreestr. Problems with the acceptable size of uploaded files are caused by the settings of the server or system that processes the documents - this is usually not difficult to fix. If a document of this size is the norm, then the service should probably take this into account and correct this limitation.

I haven't seen such a solution. Perhaps some organization could order something similar for its needs, but this is a third-party development.

Unfortunately, if errors occur on the Rosreestr website, I will not be able to change anything. I assume that there are special cases or errors in document processing. In theory, the service's technical support should monitor such things. I think it's worth notifying them, maybe they can quickly fix the problem.

On this file I need to configure parameters

Free legal advice:

cryptcp.exe applications from CryptoPro in order to

to get the correct one (from the point of view of the Rosreestr website)

electronic signature at least for an XML file (for some reason, the service for early verification of electronic signatures for .pdf or .zip files is not provided).

Finding an example of the “necessary” file was not so easy -

Either the format is not supported, or the size does not fit into 5 MB.

Free legal advice:

Unfortunately, I don't have such a file. I dealt with this problem for a very long time, and have not touched it since then.

How to read a cadastral extract received electronically?

It is very convenient to order cadastral information online on the Rosreestr website. But from July 1, 2013, cadastral information prepared in in electronic format, no longer contain the document in *pdf format. This is due to the fact that in the new version of the automated information system The State Real Estate Cadastre (AIS GKN) does not provide for the generation of a PDF document. The current legislation also does not provide for attaching a document in *pdf format.

The cadastral registration authority sends cadastral extracts, cadastral passports and cadastral plans of the territory in the form of two files: *xml and *xml.sig (*xml file signed with an electronic digital signature of a cadastral registration authority specialist). These files are not readable by regular computer programs. You cannot print a full statement or other document in these formats.

The question arises, how to read cadastral information received in electronic form?

On the Rosreestr website it is possible to create a printed representation of a document containing cadastral information from *xml and *xml.sig files. The service is called “Checking an Electronic Document”. By using of this service You can print the ordered document in a normal, familiar form.

To do this, follow the link:

SERVICE CHECKING ELECTRONIC DOCUMENT.

Free legal advice:

Then click the “Show in Human Readable Format” button. The document will open in the browser, which you can print or save to your computer.

You can use any browser, but Rosreestr recommends using Internet Explorer. Drawings in the document may not be displayed; to do this, you should unblock them in your browser settings (if the page content is blocked).

READ FULL SERVICE INSTRUCTIONS CHECKING AN ELECTRONIC DOCUMENT...

Read other interesting articles:

How to choose a plot of land? This difficult question arises for those people who prefer their home with its own adjacent territory to an apartment.

November 19, 2014 The Rules for Assigning, Changing and Cancelling Addresses were approved (Government Decree No. 1221 of November 19, 2014).

Congratulations to all cadastral engineers on professional holiday, cadastral engineer's day!

Free legal advice:

67 comments to “How to read a cadastral extract received electronically?”

It is not possible to convert an extract into a printed representation through the Rosreestr website if the extract is large (more than 10 MB). On the other hand, some government agencies require a printed extract. It turns out to be a dead end. As usual with us, “everything is for the people.”

When opened on the Rosreestr website they write “Show in human-readable format.” and which one is it issued in then?!

Rosreestr deliberately confused everything so that we would not interfere with the private property of the authorities. If they wanted to fight corruption, they would make information from Rosreestr free and publicly available.

Thank you! I almost turned gray because of these idiotic freaks from the registry office, who don’t care about people’s convenience.

Free legal advice:

Thank you again!

Thanks a lot. You can’t even imagine how you helped out)))

Many thanks for the help! Very helpful!

Thank you! Helped me open an extract file from Rosreestr. We struggled with formatting for a long time, but it turned out that everything is much simpler))).

I couldn’t help but unsubscribe, the problem arose with large file, the Russian registry cannot process it in any way, however - open Internet Explorer, then the F12 button, find the emulation mode, turn on Document Mode - 7, and open or drag your xml file into the window. I hope it helped.

Free legal advice:

Max, thank you very much! I also had a problem with a large file, they helped me a lot.

It helped, but only by dragging and dropping the file! Thanks a lot!

Good evening, thanks for the article! I also struggled until I found it. Please give me some advice on this situation. I downloaded the cadastral passport, and on the second page, where the plan should be, it says: “The file with the floor plan is missing.” What to do?

The plans are not displayed on the Rosreestr website. Try this service, it is also free, but there is a plan.

Free legal advice:

I can’t help but add one more HUGE THANK YOU)))

I join Elena: “Thank you very much for the article! Useful and necessary information! I really struggled with searching for a program to open the file, but it turned out that the problem was solved differently)" THANK YOU SO MUCH, because A lot of time was spent trying to figure it out, but the box just opened. The ROSRESTR website is a hellish labyrinth!

Thanks for the info, it helped)

THANK YOU. SOOO HELPED! Health, happiness and prosperity!

There is another option - open xml in IE, press F12, document mode - IE7.

Free legal advice:

and it opens as it was intended... innovation and development, friends...

Tell me, IE7 (document mode) - where and where to click? He also doesn’t read the building plan in the cadastral passport... I don’t know what to do now

Thanks for the information, everything is clear.

A big THANK YOU to you. And to my friend Tatyana, who found your article!)

Thanks for the help! I printed out the cadastral extract, but it is without a signature! Just text! That copy electronic signature, which came to me - does not open or print. To submit documents for obtaining a GPZU (urban planning plan for a land plot), I need to provide a cadastral extract in paper and electronic form. Will they accept my document in this printed form or do I need to order it again on paper with a signature and seal?

thank you very much for the help.

Free legal advice:

Thank you very much for the article! Useful and necessary information! I really struggled with searching for a program to open the file, but it turned out that the problem was solved differently)

Leave a Reply Cancel reply

Wise thoughts

There will never be a perfect time.

Search the site Cadastral engineer

Cadastral engineer's desk

Examples of boundary, technical plans, etc.

Public cadastral map

VKontakte website page

Cadastral engineer

Websites dedicated to the subject of CADASTRE

Open the xml file of the USRN extract from Rosreestr and get it in normal form

The Rosreestr website has a special service for opening statements (link below). Using the example of a statement for an apartment, we described detailed instructions, so repeat after us. We also wrote a small additional instruction at the end of the article if the graphic plan is not displayed in the statement.

Free legal advice:

1. Place all files from the archive with the extract in a separate folder so that all files are in one place. There is no need to rename files from the archive, i.e. whatever files were in the archive, so let them be. From the archive to a separate one, we transferred the extract for the apartment in .xml format, a unique digital signature in .sig format, and a folder (1) that contained a graphic floor plan of the apartment. Usually the graphic plan is located inside the statement itself, but for us it came with the statement separately (you can see this in the picture). By opening the file with the graphic plan, you can view it.

If the graphic plan is not displayed

Usually the graphical plan of the property is displayed correctly in the electronic statement, but it happens that in the section with the plan the message “The file with the floor plan is missing” may appear.

For the plan to be displayed, move the file with the extract.html format and the folder with the graphic plan to the previously created folder, i.e. It is important that the extract in .html format and the folder with the graphic plan are in one place. Under no circumstances should you rename the folder with the graphic plan. It came to us with the number 1, and it stayed that way. This can be seen in the picture.

If you have questions, consult a lawyer for free ↓ or in the comments below.

Ask your question in the form below or in the online consultant window at the bottom right of the screen. Or call the numbers (24 hours a day, seven days a week): - Moscow and the region; - St. Petersburg and region; additionally all regions of the Russian Federation.

Free legal advice:

Add a comment Cancel reply

The graphic plan does not open according to your instructions

Hello Dmitry. You can email me the original extract file. I cannot help you without seeing the document itself.

Hello! I also don’t have an EDS in the document, they sent it after the registration of the purchase and sale transaction was completed

Hello Maria. Explain your situation in more detail.

Thank you very much for the tip with the graphic file!

There is no digital signature in the sent file - why? And the room file is missing - why?

Free legal advice:

Hello, Lyudmila. Where did you order the extract?

The downloaded file opens in Worde as a set of icons

Hello, Valery. A file with the html extension should not be opened by Word, it can only be opened by browsers. Click right click mouse by html file and select "Open with", then your browser shortcut.

Doesn't open at all

Then email me the original extract file. Check your email, I wrote the same thing to you there. Without seeing the file itself, I can't help.

Free legal advice:

• Admin to the post Open the xml file of the USRN extract from Rosreestr and get it in normal form
• Admin to the entry We will help you understand the tax deduction for an apartment purchased by spouses
• Admin to the post Let's figure out when it is necessary to notarize an apartment purchase and sale agreement with a notary
• Admin to the post Registration of donation of a share in an apartment in 2018

For a free legal consultation

• Moscow and region St. Petersburg and region ext 346 all regions of the Russian Federation

How documents from Rosreestr are opened

Dear friends, today we will try to view the Rosreestr XML file in its normal form for further work with it. To carry out the operations from the next block, you will need Internet access, since we will use online services. Therefore, take care of this issue in advance. To begin with, we will briefly talk about what files are, perhaps with an extension unknown to you.

• An XML document is a structured database that includes some information that is then available to the user.
• A file with the SIG extension is a digital signature document to establish the authenticity of the previous one. Therefore, we cannot work without him.

But what does the following instruction give us? After all, XML can be opened in a simple notepad and quite easily find the necessary information there. But what if you need to open an extract from Rosreestr XML and print it? Then you will need the following method for launching documents from the federal service. Otherwise, you'll just be left with a bunch of codes and databases. But don’t be scared, everything is not so scary: the following steps are very easy, so you will achieve your goal in just a few clicks.

XML and SIG: how to open Rosreestr?

1. Now we will try to read the Rosreestr XML file in a normal format. First, you should make sure that you own two documents: the actual XML file itself and its digital signature in SIG format. Without the latter, you will not be able to view the information you need. Only after making sure that these two files are intact and safe, do we move on to the next point.
2. Now we go to the Rosreestr website using the link https://rosreestr.ru/wps/portal/cc_vizualisation to the electronic document verification page.
3. In this window, you will see two fields for inserting documents: one for the XML file and the other for the digital signature. Drag files from your computer with the left mouse button into the appropriate fields or use the “Select file” button opposite each item.

Inserting documents in Rosreestr

Free legal advice:

• We remind you that you will not be able to use the service of the federal service website without an active Internet connection.
• It is recommended to use Internet Explorer or Safari as a browser. Of course, other browsers will also allow you to perform these operations, but you will need to set some parameters. We will tell you more about them for each program below.
• Google Chrome must have the "Load insecure script" setting set, otherwise nothing will work.
• Open the browser Menu (three horizontal bars in the upper right corner) → Settings → Show advanced settings → Personal information → Content settings or enter chrome://settings/content in the browser address bar and press Enter. In the Java Script section, select Allow all sites to use JavaScript (recommended) or configure exceptions.

Allow all sites to use JavaScript

Conclusion

Friends, now you know how to open and read the Rosreestr XML document. To summarize the above, we can note the following:

• To work, you will need an active Internet connection.
• It is recommended to use Internet Explorer on Windows and Safari on MacOS as a browser for viewing pages.
• Make sure you have two types of data - a digital signature with a SIG extension and an XML document.
• After checking the files, you can not only view and save them, but also print them.

We hope that everything worked out and there are no questions left. Of course, don’t forget to share your opinion, impressions, and personal experiences in the comments!

We spend most of our time at the computer on the Internet. Music, films, books, communication -

Sometimes your favorite computer starts producing “miracles”. It’s good if there are no important things at this moment

Free legal advice:

Users actively store information on their PC, not paying attention to warnings that

Thank you very much! I’m sorry for the lost time and nerves because the Rosreestr employee couldn’t tell me in a human way how to get the data in human form.

Thank you so much! " Human readable format"made life very easy)

How to open the Rosreestr sig file?

A sig file is a document that contains an electronic digital signature to confirm its authenticity. It is attached to the end of an email or file. Let's look at how and how to open the sig file.

In general, there are two methods for viewing documents with a digital signature - view it on your computer using a special application or open it using an online cloud service.

How to open the sig extension?

To view files with digital signatures, you can use a regular notepad, an email client (for example, Microsoft Outlook) or a program for creating digital signatures, like CryptoARM.

It is also possible to convert a digitally signed file into PDF format, for example, using the PDF24 Creator utility, for more convenient viewing.

How to open a file with the sig extension?

Let's look at the easiest way to open it - through notepad:

After this, you can start working with the opened file.

How to open the sig extension online?

To determine the authenticity of a digital signature, you can go to the Rosreestr website. In the “Services” section we find the “Electronic Document Verification” function, upload the required document and immediately receive a response about its authenticity.

If you have any questions, leave them in the comments!

How to open the cdw extension?

How to open vob extension?

Check also

How to open a 7z file?

For the convenience of storing files and compressing their volume, experienced computer users often use archiver programs. Beginners...

How to open a file with the sig extension on the Rosreestr website

Many people use useful information online on the Rosreestrakh website, receive information from the cadastre. But since July 1, 2013, this information has ceased to be provided in pdf format. Due to changes in the country's legislation, it was launched a new version automated information system of the state real estate cadastre. And in this system there is no possibility of attaching documents in pdf format.

On this moment documents from the cadastre are submitted in the *xml extension. sig, which are signed electronically by the cadastral registration employee. Such files cannot be opened by ordinary computer programs; certain special programs are required.

What is sig format?

but each case is unique. If you want to know

how to solve exactly your problem - call the following numbers:

or if it’s more convenient for you, use the online consultant form!

All consultations with lawyers are free.

A document with the SIG extension contains an electronic digital signature and is often used when transmitting documents via online mail. Documents with such extensions are widely used by computer consumers around the globe.

Typically, a SIG document is a small text document that is attached by the sender to the end of an email. The content of the letter is determined only on an individual basis.

The file with the sig extension includes the name of the sender, the name Email. In addition, you can add other necessary information, for example, the name of the organization, telephone numbers, position of the sender and other important information to make contacts.

Most modern computer programs for sending email can create and read an electronic signature. When an email is created, a file with the SIG extension is attached to it.

How to open a SIG on the Rosreestr website

Loads into the service window that opens required file and click the “open in human-readable format” button.

On the Rosreestr website you can find detailed instructions to help you open files with the *xml and *xml.sig extensions.

In order to check the document directly using the Rosreestr website, it is advisable to use the following widely used Internet browsers:

1. Internet Explorer version 9 or 10, which has compatibility registers (you can also use the service in the eleventh version). You must use the -Include all content option. In this case, at the moment of opening the file, a panel with a button will appear at the very bottom of the window, or you can use the settings to activate the Rosreestr website in order to view it in compatibility mode.
2. Mozilla Firefox ( Mozilla Firefox) using the setting - disable protection on the page. The designation is formed in the form of a shield located in the left corner of the window of the file being opened; more extensive information can be studied online on the websites;
3. Google Chrome (Google Chrome). When setting up - loading an unsafe script, an emblem in the form of a shield pops up in the upper part of the right corner of the window when opening the file. To get more detailed information You can go online to the website;
4. Safari, used when the auxiliary view security settings are not used;
5. Opera without the presence of auxiliary options that are responsible for security. In addition, it is possible to see information (except graphic schemes) when this xml file is opened.

How to open SIG on a computer

Users need to know which computer program You can open files with the extension sig. Most often, the following programs are used to open these documents:

The easiest way to open is to use familiar Windows tools without having to download additional programs.

In order to open a file in notepad, you need to click directly on the file using the right mouse button, then “open with” will pop up and a list of suggested programs will appear, from the list you should select notepad and click “open”.

In order to edit an electronic signature and send a message with a changed signature, it is recommended to use Microsoft program Outlook. But unlike a notepad, this program is paid and requires registration.

The Atom program is similar to Notepad, but it is supplemented with syntax highlighting.

Now users are familiar with how to open a sig file on a computer, using which programs.

The Rosreestr website has a special service for opening statements (link below). Using the example of registering for an apartment, I wrote out detailed instructions, so repeat after me. There is also a small additional instruction at the end of the article if.

1. Place all files from the archive with the extract in a separate folder so that they are all in one place. There is no need to rename the files, i.e. whatever files were in the archive, let them remain so. From the archive, I transferred the apartment extract in .xml format, a unique digital signature in .sig format, and folder (1), which contained a graphic floor plan of the apartment, to a separate folder. Usually the graphic plan is located inside the statement itself, but for me it came with the statement separately (you can see it in the picture). By opening the file with the graphic plan, you can view it.
2. Follow this link - https://rosreestr.ru/wps/portal/cc_vizualisation. This page was created by Rosreestr to open xml files of statements.
3. On the page click on the “Select file” button in the “Electronic document (xml file):” field.
4. Go to the created folder and double-click on the file in .xml format(this is our extract).
5. Click on “Select file” in the “Digital signature (sig file):” field and double-click on the file in .sig format, which is located next to the statement.
6. Click on "Check".
7. A message should appear that the XML file (the extract itself) is certified with an electronic digital signature. Click on “Show in human format”.
8. Will appear in a new browser window electronic statement , in which all information about the property is now visible. The extract file was created in .html format, which can be opened by any browser.
9. To save the statement in .html format and then easily open it on any browser, click on the button "Save". To print the statement, click on "Type". It happens that these buttons are missing, therefore, to save the statement on the keyboard, press CTRL + C, to print - CTRL + P.