Sounds and Music 

Recover a forgotten Windows 10 password. How to easily reset a forgotten password in any version of Windows. How to create a new user if you forgot your Microsoft account password

Read, how to recover forgotten password Windows user 10 and recover the administrator password. What programs are there for password recovery? Losing your Windows 10 user account password can be a very unpleasant surprise. Indeed, as a result of this, access to the data of a particular computer is completely lost. It’s good if you know the password for the Administrator account, from which you can manage passwords for users on a specific computer. But sometimes it turns out to be forgotten or lost.

Sometimes you urgently need to gain access to a computer for which you do not know the password. Necessary information is right at your fingertips, but you have no opportunity to use it. How to restore access to your computer and your files or documents?

What to do if you forgot your Windows 10 password

Step 1: Recover data from a computer whose password has been lost

If you lose access to your data as a result of losing your Windows 10 account password, one of effective ways their recovery will be using the program Hetman Partition Recovery.

For this:

  • Download the program, install and run it from another account of this computer. Check out the program's capabilities and step-by-step instructions.
  • By default, the user will be prompted to use File Recovery Wizard. By pressing the button "Further" and the program will prompt you to select the drive from which you want to recover files.
  • Double-click on the disk the files from which you want to recover and select the type of analysis. Specify "Full Analysis" and wait for the disk scanning process to complete.
  • After the scanning process is completed, you will be provided with recovery files. Select the ones you need and click the button "Restore".
  • Select one of the suggested ways to save files. Do not save files to a disk from which these files have been deleted - they can be overwritten.


Step 2: Recover the Windows 10 built-in Administrator account password

Looking for how to recover your Windows 10 Administrator account password? Do the following:


Step 3: Programs for recovering Windows 10 account passwords

Recovering Windows 10 account passwords can be done using special programs to reset or recover passwords. Such programs are especially relevant in case of loss of the Administrator account password (since the passwords of other accounts can be reset using this account).

For this:

  • Download and install a program to reset or recover account passwords.
  • Use this program to create a bootable CD, DVD, or USB drive(if necessary).
  • Restart your computer and boot from the bootable media you created.
  • Reset or recover passwords for the required account.

Step 4: Recover a forgotten user password using Windows 10

Before you begin recovering your user account password, check the password hint, which is located on the welcome screen next to the password entry field.

If the hint did not help you remember your password:


Step 5: Boot disk or flash drive to recover Windows 10 password

Boot disk To recover a password, you can create it yourself or use a ready-made option (which can be purchased or downloaded).

Recover your password using LiveCD

The account password can be recovered by starting the computer using LiveCD - an alternative portable version operating system. This method is relevant if you cannot boot your computer or connect HDD to another system.

For this:


Use the installation disk image

If for some reason you did not create a system recovery disk, and Windows has lost its functionality, then it can be restored using an operating system recovery disk image.

Such an image can be created immediately after installing the OS and software or at any other time.

You can download free utility from Microsoft and create an image. To do this, do the following:


Note. Do not run the system repair disc from working Windows. To use it correctly, install the system image media in the BIOS as the first boot device and reboot the computer.

Important: It is necessary to create an image only on a working system that is not infected with viruses and does not contain errors. After recovery, you will receive an exact copy of the system at the time it was created.

Step 6: Restore access to your account on the Microsoft website

IN latest versions Windows account The user account is integrated with the Microsoft account. To manage some Windows account functions, work with the operating system and configure it, access to it is required.

If you need to restore access to your Microsoft account:


Step 7: Perform a clean install of Windows

In case none of the above methods did not lead to the desired result, reinstall Windows.

In order to perform a clean installation of Windows, you need to create an installation disk or other media from which you plan to install the operating system.

Boot your computer from installation disk. To do this, you may need to change the boot order in the BIOS (or UEFI for more modern computers).

Following the installer menu items, specify the drive on which you want to install Windows. To do this you will need to format it. If you are not satisfied with the number or size of local disks, you can completely remove them and re-allocate them.

Remember that formatting, deleting or reallocating drives will delete all files from your hard drive.

After specifying the drive for Windows installations The process of copying system files and installing the operating system will begin. No additional actions are required from you during installation. During the installation, the computer screen will go dark several times for short periods of time, and the computer will restart itself to complete some stages of the installation.

Depending on the Windows versions At one stage, you may be required to select or enter basic personalization settings, the operating mode of the computer on the network, as well as account settings or create a new one.

Once the desktop boots, the clean installation of Windows is complete.

Note. Before you begin a clean installation of Windows, make sure you have drivers for all installed devices and the safety of your files. Download and save the drivers to a separate storage medium, and create a backup copy for important data.

Has the user's password been restored? Leave feedback and ask your questions in the comments.

Sometimes you log in and realize that your account password needs to be reset. Well, you don’t remember a thing. The worst thing that happens is when you lose your administrator password. It's good if you use an account Microsoft entry, and you can request a change by phone or email, but the complexity of using this technique scares people away. And then you have to puzzle over how to reset your password on Windows 10.

You need to restore access through the command line of the installation media. No direct method in order to log in, but there is a bypass. Craftsmen come up with these techniques themselves, but it is possible that some information is also posted on the official Microsoft website. Today we will not talk about how to recover your password. This cannot be done in a normal security system. But resetting the administrator password is quite possible.

Command line

The principles of working with the command line will be very useful. The fact is that we need the account name and the name of the computer itself. We bet that most users do not know this information. You can view it from the command line. In combat mode, we will call it from the recovery tool from a bootable flash drive, and now we propose the following action plan:

  1. Win + X to open the system menu.
  2. Selecting the desired line (including on behalf of the administrator).

Let's try simple command net user. It shows a list of names of all users on this computer. So you can rewrite what you need when recovering your password. And at the same time, find out the computer name. Because the custom one is already present on the command line.

The next step may be to study a specific account. This is done as follows. Type net user desired_name. A list of available information appears. Please note that the computer nickname is indicated in capital letters, but is typed in small letters. There's really no difference. You can type in both uppercase and lowercase.

So, for example, we see that the guest account does not have a password, but it is disabled on this moment not available. Finally, from time to time you will need to run the Command Prompt as someone else. For example, you have information about the global system administrator, but you cannot log into this account. But it’s quite possible to launch the desired procedure. This is done using the runas command. It will only work if there is a password; when logging into Windows, carry out the necessary operations. How to do this will be shown below.

Please note that the characters you enter will not be displayed when prompted. It seems that something has gone wrong, but this is an erroneous train of thought. The characters are accepted by the system but not displayed on the screen. Continue restoring your laptop with peace of mind. The syntax of the runas command can be viewed in the standard way by adding /?. Here's an example:

  • the /user key says on whose behalf the launch occurs;
  • separated by a colon are computer_name\username;
  • name of the program to launch.

No spaces in the user key, otherwise the system will not accept the data. A blank password is not allowed. The standard application names for the command line are cmd.exe. This concludes the introductory part; links to it will be provided further in the text.

Loading

You need to run from installation media - a flash drive or DVD disc. Set it in BIOS required options, or use the F12 key (sometimes ESC) at startup. The second method is simpler, but does not work in all cases. In the BOOT section, put the desired media in first place. This will ensure it loads correctly. Flash drives often do not get here, and therefore you have to use F12 (ESC).

On some computers, as can be seen from the screenshot, pressing ESC is fundamentally no different from the BIOS. Be careful: you only need to click once. Otherwise, the menu immediately disappears from view. Compare this screen with the one taken from the BIOS.

Things may be different on other computers.

Launching media

So, bootloader priority is set on the computer, and we are 100% ready to reset the Windows 10 password. Please note that a module is installed on the disk that requires you to press any key within 5 seconds, otherwise the bootloader will turn on hard drive.

This will be followed by a screen for selecting the operating system version if the media is multiboot. Please note that the 32-bit version of the command line is quite suitable for Windows 64-bit and vice versa. So, don’t worry if there is no suitable version. Start launching with the existing one.

How to enter command line mode

We didn't promise to find out your computer password, but you can reset your account information without any difficulty. After selecting the version, traditional windows will appear - the painfully well-known logo. Sometimes it’s even difficult to understand where the download is coming from - has the hard drive turned on?

As soon as the first meaningful window appears (usually a prompt to select a language and some other settings), press Shift + F10. This will immediately open a command prompt window. Without any accounts, work is carried out from the media. Let's see if his rights are enough to carry out the necessary operations.

The essence of the events

The idea was taken from Windows Server, but it turned out that it works on ten too. We will now change the Ease of Access Center applet to the command line. Therefore, when starting later, instead of asking us to enter a password, we will see command line, from where it will be possible (see above) to do everything necessary operations. That is, carry out administration and then log in, a new password is set for Windows 10. Complies with domain requirements, if any. Let's get started.

Teams

We type the operation of changing the name of the applet to a neutral copy: move D:\Windows\System32\utilman.exe D:\Windows\System32\utilman.backup. The executable file has turned into harmless ballast for the hard drive. Be careful, when moving, use the letter of the system drive.

The screenshot shows the complete sequence of actions, which we will not describe in the text. After the operation has been completed, you need to replace the utilman.exe utility with its imitation in the form of a command line launch. To do this, type the following text: copy C:\Windows\System32\cmd.exe C:\Windows\System32\utilman.exe. There is no point in illustrating this, just type and execute. Type exit or close the command prompt and begin rebooting. You can delete the distribution media; it won’t be useful for now.

Working from a hard drive

After the reboot, a window will appear asking you to log in, but we instead click on the lower left corner, where the button with the Accessibility circle is located. Our command line appears, from which we will proceed further.

Hello friends! I've been wanting to tell you for a long time, Howhack admin password in windows 10 using one cool program called Active Password Changer.

How to Crack the Administrator Password on Windows 10 Using Active Password Changer

I often get laptops brought to work whose owners simply forgot their login password. operating system and now they don’t know what to do. In this case, the problem can be solved in several ways, for example: use a bootable USB flash drive with the program Lazesoft Recovery Suite Home, or boot laptop from installation Windows disk 10 and using the boot environment and the command line, create another user with administrator rights and log in, there are several more ways, if interested, read ours, but today I will offer you an even simpler method.

The Active Password Changer program itself paid, but the author is a kind person,"sewed up" to the installer image BootDiskDOS.ISO, with which you can reset a forgotten administrator password in Windows 7, 8.1, 10 operating systems, you just need to create bootable USB flash drive I will also show you how to do this.

In short, you can do this, follow the link to the official website of the Active Password Changer program

http://www.password-changer.com/

download it and install it,

and then take the image in the program’s personal folder BootDiskDOS.ISO and make a bootable USB flash drive from it, but I wouldn’t download and install the program just because of this, since The demo version will not crack your password for free, but will only demonstrate hacking.

You can do it easier, download BootDiskDOS.ISO on my o black

The ISO image itself weighs only 1.53 MB.

We create a bootable USB flash drive from it using the program.

Let's launch the program. At the very top, in the list, select our flash drive.

Put a tick on the item Auto format it with FBinst and mark the item NTFS.

Check the box Linux ISO/Other Grub4dos compatible ISO and click on the button on the right,

An explorer window opens, in which you need to find the BootDiskDOS.ISO image, select it with the left mouse and click “OK”.

"OK"

We are warned that all files on the flash drive will be deleted (if you want to create a bootable flash drive without deleting files on it, then read this).

We agree “Yes”

The bootable USB flash drive is ready.

We boot our computer from this flash drive with installed Windows 10, on which we forgot the administrator password.

In the boot menu, select our flash drive.

Press “Enter” on the keyboard.

If we want to reset the password, then press “ 0 »

Windows stores all passwords in LM hash or NTLM hash format in a special file called SAM(Security Accounts Manager (SAM).

We start searching for the SAM file - click on the “ 2 " and then "Enter".

Active Password Changer begins searching for a SAM file with password hashes on your hard drive.

SAM file found, click"Enter" on the keyboard.

The program found in the SAM file under number “1” my account with the name"Alex".

Press “1” and “Enter” on the keyboard

In the next window, the program by default offers to remove the password from the account we have selected.

Click "Y".

Password reset.

And we enter the operating system without a password.

The program is very reliable and simple, but there is a minus, you cannot download from such a flash drive new laptop with UEFI BIOS, but the solution is in our other article: -

Login password Windows system– one of the ways to protect personal data. But if the user has forgotten the security key for the account and cannot log in, then security becomes an obstacle that must be urgently eliminated.

There are several ways to reset your password. The choice of method depends on the type of profile. If the user has forgotten the password for the local account, then to restore access you will need a Live CD or installation Windows media. If you have lost the access code for your Microsoft account, you can resolve the problem on the corporation’s website.

Microsoft password reset

If you use a Microsoft profile to log in, you can quickly recover your password on the official website. To do this, you will need another device with Internet access. To begin regaining lost access to your Microsoft account, go to the page and select " I do not remember the password».

Enter the email address that was used as the account name. Specify the characters from the picture.

To verify your identity, you must receive a security code. If you have the phone at hand that was used to create your Microsoft account, send an SMS with the code to it or call it. After this, all that remains is to enter the received security code, reset the old password and install a new key. If you can't access your phone, click " This data is not available».

Enter a different email address for contact. A Microsoft security code will be sent to it. Copy it from the letter.

After entering the security code, you need to answer questions regarding the personal data associated with your Microsoft account.

Correct answers will convince the system that you are the true owner of the account. Old Password will be reset, you will be able to specify a new security key.

Local account access

If the user has forgotten the password for a local account, then to restore access you will need a Live CD or media with a Windows 10 distribution. To create installation media you will need:

  1. Flash drive.
  2. Another computer with Internet access.
  3. The Media Creation Tool utility, which can be downloaded from the Microsoft website.

Connect the installation media to the computer that is using the locked account and boot from it. When the language selection window appears, click Shift+F10 to call the console.

Important: If Command Prompt does not appear, select your language, then go to System Restore and proceed to troubleshooting. Open there Extra options and proceed to using the command line.

Determine the letter of the partition on which Windows 10 is installed. To do this:

  1. Enter the command " diskpart».
  2. Execute " list volume».
  3. Look up the Windows volume letter by identifying it by size.

Typically, the system partition is assigned the letter C. After defining the volume, exit the DISKPART utility by entering the command " exit».

There is no need to close the command line; you will need it to run the following queries:

  1. move c:\windows\system32\utilman.exe c:\windows\system32\utilman2.exe
  2. copy c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe

To restart your computer, use the command " wpeutil reboot" After restarting, you need to boot not from the installation flash drive, but from the system partition. In the Windows login window, click on the button Special parameters" After replacing the system files, it will launch the command prompt.

To reset a forgotten password, follow the query " net user Sample new_password" If your username has more than one word, put it in quotation marks. If you don't remember how to spell the username, print full list accounts with the command " net users" After changing your password, you can easily access your local account Windows entry 10 with the new security key.

Reset via built-in administrator

Instead of resetting the password via the command line, you can remove it using the built-in Windows administrator 10.

Important: To use this method, you must have Windows 10 Enterprise or Professional edition installed.

Run the command line using the above algorithm with replacing system files. Execute " net user Administrator /active:yes" IN English version Windows instead of " Administrator» write « Administrator" After the computer restarts, a built-in profile with administrator rights will appear in the list. Go into it, click right click By " Start" and run the utility " Computer management».

Expand the item " Local users", select the item " Users" Click on the profile you can't log into and select " Set a password».

Click Continue and enter New Password account. After completing these steps, the old access code will be reset, you can disable the built-in administrator by running “net user Administrator /active:no”. To return system files in place, run Command Prompt again via System Restore and run two commands:

  1. del c:\windows\system32\utilman.exe.
  2. move c:\windows\system32\utilman2.exe c:\windows\system32\utilman.exe

Now when you click on the button " Special abilities» a list will appear on the password entry screen additional functions, rather than launching the command line. There are other ways to reset your password - through the registry editor, using third party programs. However, the methods described above are official, so it is recommended to use only them.