Working on a computer under the account of a simple Windows user is quite depressing, especially if a malicious admin has blocked some important things. For example, launching games or . In such a situation, the easiest thing would be to reset the admin password for logging into the system, log in as an admin and ignore all restrictions, but sometimes they can be punished for this. What to do?

There is an exit! Today we’ll talk about how to bypass a password Windows administrator to enable blocked functions so that the admin does not guess anything.

Rescue Kon-Boot

Account password Windows entries, including the administrator - far from a barn castle. In terms of strength, it is rather reminiscent of a latch: it doesn’t seem to let go, but if you press a little harder, it will fly off. It fell off! And what kind of protection is this if any “mom’s hacker” can offhand name a couple of utilities that can knock her down in a few minutes?

Since password protection is so unreliable, it means that it can be bypassed without resetting, the creators of the utility reasoned. And they were right: thanks to their efforts, a small application was born that can disable the password request when logging in to any account.

The utility does not delete or change the current password. All it does is modify the data in random access memory computer so that the operating system “forgets” to compare what the user enters with what is stored in its databases. This only happens when the program is running. After its use, no traces are left on the system.

Kon-Boot supports all editions of Windows x32-64 on desktop computers and laptops. And not only Windows: there is a modern version of the utility for Mac OS X, and its earlier releases, which can still be found on the Internet, are supported by many Linux distributions.

The current Windows version of Kon-Boot at the beginning of 2018 is 2.7, which allows you to bypass password requests not only for local but also network accounts. The last function does not work in Windows 10 - Tens users can only bypass local protection. But we won’t be upset about this, because to disable admin locks, what we have is enough.

Unfortunately, the utility has a number of restrictions on its use. It will not meet your expectations if:

• The disk on which the OS is installed is encrypted.
• There are several operating systems installed on the computer.
• The system uses a non-standard bootloader.
• User authentication is carried out through the domain.
• The system is installed on a mobile device or in a virtual machine.

In other cases, success is almost guaranteed. And if you don’t mind that the application is paid – a personal license costs from $25, go for it. And if it bothers you, I’ll share a secret: you can find images on torrent trackers boot disks BootPass or Hiren's Boot CD, which includes Kon-Boot.

How to use the utility

So that the application can influence the processes occurring during starting Windows, it should start working even earlier. That is, Kon-Boot must be written to bootable media (USB flash drive, laser disk, etc.) and every time you need to bypass the password, boot the computer from this media.

The program includes 3 sets of files:

• To create a bootable USB drive (supports UEFI systems).
• To create bootable CDs or DVDs (no UEFI support, BIOS only).
• To create bootable floppy disks (BIOS only).

The last two are outdated versions of the application, which are retained in the distribution for the sake of compatibility with older PCs.

The distribution also includes KonBootInstaller, a tool for creating bootable media.

Before starting to work with the program, unpack it from the archive into a separate folder. Next, connect a clean drive and run KonBootInstaller.exe. All this must be done on a machine where you have an administrator account, since the installer needs elevated rights for further actions.

• If recording is made to a flash drive, select it from the list " AvailableUSBdrives" in the main installer window. If you have other USB media connected to your computer, disconnect them.
• Click on the area " Installto...” corresponding to the media type.

• Confirm your consent to perform the operation by clicking " Yes" in the next window.

• The progress of further actions will be displayed in the console window. Please note that during the creation process bootable media all information on it will be destroyed.

• After the installer has completed successfully, you will see the message “ Alldone!» Click OK.

If the error message “ Error installing to USB, please check the log file", open the Kon-Boot folder (where the program was unpacked)\kon-bootUSB\USBFILES and rename the file konboot.lst V menu.lst. After this, repeat the media creation procedure.

Everything is almost ready. All that remains is to connect the newly created flash drive or disk with the utility to the desired computer, (UEFI), and voila! Also, if the option is enabled in UEFI Secure Boot, it must be disabled.

After restarting the PC, the Kon-Boot image will appear on the screen instead of the Windows screensaver. Hooray!! You did it!

Then everything is elementary. Enter any characters in the administrator account password entry field. Windows will “eat” them without objection and in a few seconds will take you to the desktop. Open the reactor group policies(GpEdit.msc) and disable blocking or solve your problems right here.

Please be aware that using hacking tools such as Kon-Boot in places where it is not allowed (at work, school, etc.) can have negative consequences for you. And all responsibility for following the advice from this article will fall entirely on you. So be careful. And may good luck be with you!

How to Bypass Windows Administrator Password to Enable Blocked Features updated: January 17, 2018 by: Johnny Mnemonic

Setting a password when logging into Windows XP is good, but here's what to do if you lose or forget Windows password XP? What should I do? Reinstall Windows?

Forgot your Windows XP password! What to do?

Of course, you can bypass this password if the password is not set to account administrator. Well, if the password is set to the administrator account, then you will not be able to bypass it, you need to crack it using a special program.

For a novice user, cracking the administrator password of the Windows 7 operating system is a little more difficult than Windows XP. But despite this, in the next article we will definitely analyze the situation with forgotten password from Windows 7. For now, let's return to the Windows XP system.

You can bypass the Windows XP password without much difficulty. Let's look at several ways to log into Windows XP.

First way:

Hacking the administrator password using Active Password Changer

If the password is on the Windows XP administrator account, the last two methods of bypassing the password may not help you. You will have to use a little program called Active@ Password Changer.

Active Password Changer can quickly reset passwords set on OS Windows XP/Vista/Windows7/8. The program is very simple, so you shouldn't have any problems. You simply download this program using another computer and upload it to a flash drive. Place the flash drive on the computer whose password you want to crack, turn on the computer and crack the password. Read more below:

And so we download the Active@ Password Changer program. Size 1.5 MB.

How to use Active password changer?

— Install the Active Password Changer program. We launch it, after which the main program window will open, select our USB drive in the list, and click “Start”:

— The flash drive is ready for hacking, connect it to a computer with a forgotten password.

— Turn on the computer and press the F12 key.

— In the list, select the system boot method, set it and press “Enter”.

— Select the desired account and enter the account number below which has the password and press “Enter”

- And the last action is to press the “Y” key to confirm the hack. You can enter "N" to return to the previous menu. After entering the letter, press "Enter".

— Wait for a message to appear indicating that the password was successfully removed.

- Reboot your computer and you will be able to log in without a password.

Second way:

— After restarting the computer, click on the button F8. After which an additional menu will open with Windows boot options, select from the list "Safe mode";

- After this, a desktop window will open with a message that your Windows is running in safe mode, agree with this by clicking “Yes”.

Your desktop will look something like this;

- Now that you have access to your computer, you can log into your password-protected account and remove the password. To do this, open the Start menu and go to « Control Panel» ;

Run "Accounting user records». Next, click on the account icon that is password protected;

— Select from the list of actions "Change Password" and change your password. Or even select a function "Deleting a password" and remove it;

— Restart your computer and log in normally.

Third Method:

— After the password entry window opens, press several times Ctrl + Alt + Delete .

— Another password entry window will open, as shown in the figure below;

Here in the line user, you need to enter the word "Administrator" , and leave the password line unchanged, that is, empty and click “OK”.

- After this, Windows should start, then you need to go to "Control Panel", open "User accounts", Select an account that is password protected.

Enter New Password and confirm it. That's it, you've changed your Windows XP password;

If you do not want to change your password, you can delete it altogether by selecting “Remove password”;

That's all, the password on the computer is hacked easily and in a simple way. That's all I have

How to bypass Google account on Android 5.1, simple methods.

You probably want to know how to consistently earn money online from 500 rubles a day?
Download my free book
=>>

In order to mobile device served only its owner, so that no one else could use it, Google linked it to its account. That is, if your phone is stolen or you lose it, then without knowing your Google email login and password, it will be impossible to use it.

In this case, expensive and multifunction device turns into an ordinary toy - a prop. From this point of view, linking the gadget to a Google account is quite justified.

With each new release, the security of Android devices is getting higher and higher. And this, of course, pleases the owners of expensive copies. However, there are situations in which the owner of the gadget has a question: how to bypass Google account on Android 5.1?

Nowadays, every person has dozens, or even hundreds, of different accounts and services on which you need to enter a login and password. As a rule, for security purposes, we are warned that it is advisable to create unique passwords that are not used on other sites.

It is impossible to remember such a number of passwords. Therefore, most often we store all data either in in electronic format, or on paper. However, in both cases, no one is immune from loss of information.

It is clear that in this case you will not remember the password. So what to do, is there a way out of this situation? I hasten to reassure you, a way out can almost always be found.

I can offer you several options for bypassing Google Account on Android:

1. From your computer, log into your Google account, reset and change your password.
2. Also, from your computer, in your Google account, unlink the gadget.
3. Disable protection on your mobile device.
4. Take the documents to the service center.

Change password

If for some reason you do not remember your password, and after resetting you cannot log into your account, then you can:

1. Log into Google mail from your computer. As a rule, the browser from which you logged into your account remembers all the login data and substitutes them during authorization.
2. IN mail settings change the password to a new one or unlink the gadget from this mail.
3. Enter a new password on your mobile phone.

In the case when you have removed the connection of the device to mail, the protection is disabled and anyone can use the gadget.

Service center

In the event that you do not have access to your account, and there is no way to change the password or detach the device, you should seek help from specialists. True, provided that you have kept the receipt and warranty card. Then the best option will - contact the service center.

Pirate methods

If the gadget is not yours, for example, you found it or bought a used device, you will have to use pirated methods to activate the device.

First method

The first method is suitable when a reset has not yet been applied and the device is not locked.

Second method

The second method is used when the device is locked, which happens after a reset.

1. Install a SIM card and call the device.
2. Pick up the phone and add a new call.
3. In the dialers write the code *#*#4636#*#*
4. After this, Android should automatically transfer you to the advanced settings menu.
5. Go to “Restore and reset” or “backup and restore”.
6. Disable “Data Backup” and everything related to data recovery.
7. Reset all settings and upon activation, enter the login and password for your account.

Method three

In this case, all information that was previously entered into the device will be erased and it will be possible to configure it again.

How to bypass Google account on Android 5.1, summary

In fact, there are many more ways to bypass Google account on Android, but these are the simplest and most accessible. the rest require installation special programs, drivers, application codes and so on.

All the main actions, in this case, are aimed at one goal - to reset all settings to factory settings and unlink the mobile phone from the previous Google account.

Useful articles on the topic:

P.S. I am attaching a screenshot of my earnings in affiliate programs. Moreover, I remind you that anyone can earn money this way, even a beginner! The main thing is to do it correctly, which means learning from those who are already making money, that is, from Internet business professionals.

Get a list of proven, especially current, Affiliate Programs in 2018 that pay money!


Download the checklist and valuable bonuses for free
=>> “The best affiliate programs of 2018”

Google is like a kind uncle who wishes only the best for his loved ones. However, excessive “guardianship” and the desire to do “the best” often turn into a disservice. WITH Android update 5.1 Lollipop smartphones and tablets received an additional feature that is designed to protect the device if it is lost or stolen. The principle of operation is quite simple: after resetting the device settings, and upon first boot, the smartphone or tablet requires you to enter an account Google entry, to which this device was previously linked. However, if you bought a used device, or simply forgot your account, this can significantly complicate life. We will help you bypass Google Device Protection.

Method 1

• Call this smartphone.



• Write any numbers in the dialer and click “Add number to existing account”


• After this, the system will prompt you to add Google account, enter your details.


• Save a contact with a random number in your account.


• Reboot your smartphone.

Method 2.

• Install the SIM card in the device on which you want to get rid of the lock.


• Call this smartphone.


• Accept the call and click on the "add new call" button.


• In the dialer we dial the entry code into engineering menu *#*#4636#*#*


• After typing the code, your device should automatically redirect you to the advanced settings menu.


• Press the "back" button and get to the settings menu.


• In the settings we find the item “Restore and reset” or “Backup and Restore”.


• Disable the "Data Backup" function and other recovery functions.


• Perform a factory reset again (restore factory settings).


• When you first boot your device, enter your Google account.

Method 3.

This is only relevant if your device supports Fastboot.

• Install Android drivers.


• Download and run Fastboot.


• Put your device into Bootloader mode.


• Enter the following lines into Fastboot: