How to remove a password on a laptop. How to unlock a laptop if you forgot your password? Simple methods, instructions and recommendations. Method using accounts

17.01.2021

Almost always our electronic devices are password protected. Often we do this just in case, just in case. After all, why do this if your PC or laptop is used only at home, with loved ones, or in the office, when no one has access to it? Let's say you decide not to burden yourself with remembering complex combinations of symbols and numbers. The question arises: when turned on? First, we take the code from the administration and the password reset disk.

What is the administrator password and how to remove it

When you turn on your computer or laptop for the first time, each user is asked to come up with and enter security code. We do this and write it down somewhere so that next time we can log into our device. This combination is the administrator code. Now let's look at how to remove the password. To do this we launch operating system and we find ourselves in it as an administrator. We go along the following path: “Start”, “Control Panel”, “User Accounts”. Click on the last logo and in front of us is the administrator account. To the left of the image is the “Delete your password” tab. You'll have to enter it again. And that's it, it's done.

Removing user account passwords and user accounts themselves

To clear the codes of other accounts, click on “Manage another account”. Then we find the one we need in their list and do as in the previous case: to the left of the image there is the inscription “Deleting your password”. Click on it and enter the code from this account, not the administrator. It is done. So we figured out how to remove the password from your computer when you turn it on. If you have many accounts and you do not want to write different combinations when turning on the device, evaluate the need for these entries and delete all unnecessary ones. To do this, after “User Accounts”, go to “Manage Account” and click on the desired one, and then on “Delete Account”. After which the system will ask whether this user’s files need to be saved on the computer. If not, delete them; if you need them, then select the “Saving Files” tab. To complete the operation, you must confirm it. There is also a standard account called “Guest”. It is not recommended to remove it, but you can enable it or disable it completely. When disabled, only the administrator profile will remain and, of course, the question of how to remove the password from the computer when turning it on will disappear. In the case when you have removed it, the device will always be turned on without additional manipulations.

Creating a password reset disk

It also happens that you forgot your password. To prevent this from becoming a big problem, users create a password reset disk. Using it, you can easily reset and log in. How to do it? Simple enough. You need a flash drive with a minimum free space, the information on it will not interfere or be damaged. Consider the following factors: the disk must be made for all accounts; if you create several flash drives, only the last one will work; When changing the password, there is no need to create a new disk; the old one will function. Now about the process itself. In “Start”, click on the photo of your account and insert the external memory into the device. Select “Create a password reset disk”, a new window will open, click “Next”. Select your flash drive, enter your account code and click “Next”. The process itself will begin, during which you will need to click “Next” again, and then “Finish”. All! The userkey.psw file appeared, which is responsible for the reset operation.

How to remove the password from your computer when you turn it on using a reset disk

Something you have been afraid of for a long time has happened. When you turn on the computer, you need to enter a code, but it is lost and the memory is empty. What to do? And then you remember that not long ago you secured yourself by creating a flash drive with a reset password. Find it and try to log in without entering the code. A button appears that says “Reset Password.” Click on it and insert the saving flash drive. Would you like to have New Password To log in, enter it twice and the prompt; if you don’t want to, just click “Next.” That's it, the code is reset. In fact, it is recommended to have a password when you turn on your computer. So keep it well or memorize it.

Synchronizing user data within one account is a fashionable trend today, which has its advantages. Many log in Chrome browser under account Google entry, thereby having its own browser settings on different devices(different PCs, smartphones). Microsoft provides similar functionality in its new operating systems.

During Windows boot 8 and 8.1, when working through a Microsoft account, the system asks you to enter the user password, and so on every time you turn on the computer. Of course, security is paramount today, but if the computer is used only at home and only by you, the need for constant authorization loses relevance and begins to cause inconvenience.

How to disable the password prompt in Windows 8.1 and 8 when you turn on the computer when using a Microsoft account?

Using a keyboard shortcut Win+R let's open the utility Execute. In the window that opens, enter and click OK.

In the window that opens " user accounts"select the required user and uncheck the box for him in the item Require username and password.

After that, click Apply. A window will open to fill in the data for automatic login. The username will already be filled in here, all you have to do is enter your password and click OK.

Now you can safely restart your computer and watch the login to Windows 8 without asking for a Microsoft password.

II Method.

Replacing your Microsoft account with a local one

On the menu Start select Change computer settings.

Go to the tab Users and further on setting Switch to local account.

The system will ask you to enter Current Password from a Microsoft account - fill it out. Then we will be prompted to enter a new password for the local entry - we don’t enter anything here, just click Further, after which the users will change.

Good day, dear readers, Denis Trishkin is in touch again.

IN latest versions operating systems from Microsoft, for security purposes, it is possible to set a password for logging into work area. If this tool is no longer relevant, you can disable it. I will tell you how to remove the password in Windows 7 in several ways. After all, constantly enter secret symbols sooner or later it gets boring. This is especially irrelevant when only one person is working at the computer.

Many users store information on their computer that only they should have access to. If only one person uses the device, this is not a problem. But in the case when another may approach him, certain difficulties may arise.

Windows provides a special tool that restricts access to data by setting a personal key. For example, parents often use this tool to prevent their children from seeing content they are not supposed to see. In addition, this way you can protect yourself from changing your personal settings.

Disable password( )

There are several ways to turn off key entry. Each of them assumes that you are the owner of the account that needs to be updated. The first means that the password is known and the user has administrator rights.

It allows you to quickly deal with this problem:

That's all. Now, when the system starts, you will not be prompted to enter a secret key.

Important! However, if you change your account or go to the lock screen, you will still need to enter your password.

You can remove the annoying function using the standard menu “ User Accounts" True, in this way it will not be a shutdown, but complete removal. Despite this, Password will not be asked under any circumstances, even after resuming from sleep mode.

To disable the protection tool, do the following:

That's it, now the system will not ask “stupid questions” regarding security in this area.
Here you can also create secret combination characters.

Interesting to know! When installing a key, experts recommend entering large and small letters in different languages and also adding numbers. The length must be at least six characters. Only in this option can at least some security be guaranteed.

Resetting the network key( )

Probably all computer users know what a network is. It is a connection between two or more devices that allows the exchange of information. The younger generation is familiar with this concept, as games can be played together through this method.

But what should you do if, after connecting the machines, a window appears to enter the network password? Moreover, if it does not exist, confirmation empty line will not lead to the desired result.

The fact is that Windows 7 provides new security tools, and therefore several conditions must be met to log in:

Use classic settings on all devices.

If all this is done, then you will not need to enter secret characters.

Resetting the administrator password( )

Sometimes situations happen when, under some circumstances, you simply forgot the password with which you can get to your desktop, and generally gain access to personal data. This often happens when a user constantly works on multiple devices. And if the passwords are not written down on them anywhere, then it is quite possible to confuse them.

There are several solutions. The first thing you can do is spend some time on selection. Alternatively, simply remove the system from your computer and install a new one. But in this case, the data that was on the system disk will be lost. And it’s not a fact that they can be restored, although methods exist.

But there is a safer way - a bypass, which I want to talk about. For this you will need installation disk or a USB flash drive with Windows. It is important to note that the operating system must be exactly the same. For example, if the Ultimate version is installed, then the same is true on a portable device.

So, if everything is found and prepared, you can proceed:

We insert the flash drive or disk into the computer and reboot to start from it. To do this, you need to set the appropriate settings in the BIOS.

Below we find " System Restore».

A window will appear in which we need " Command line».

increase

In it we write “ regedit" and confirm the actions.

The registry window appears. We need a branch " HKEY_LOCAL_MACHINE».

We go to the system drive (most often this is C:\). Next we go to the directory “ Windows\system32\config\" and select the file " system».

A small menu appears in which you need to enter the name of the new section. It can be anything. Let it be 3333.

On the right side, open the parameter “ CmdLine", where we enter "cmd.exe" and confirm.

After that, select “ Setup Type", where we enter " 2 ».

Now select the newly created section “ 3333 ».

Let's go to " File" And " Unload bush».

We take out the portable device, close all windows and reboot using system restore.

After the work has been done, a command line will appear while the OS is loading. Here we can change the password. To do this, enter in the line “ net user user password" We confirm the action. Example command: " net user admin 1111».

In this way we changed the password for the user " admin" on " 1111 " Now in the offered window we enter our treasured numbers and wait for the download.

Resetting your password via SAM file( )

There are many ways to bypass the login security system. Despite this, they all only change the information that is stored in the SAM file. It contains all the necessary data related to User-Password links.

It is worth noting that this file does not have a special extension. The fact is that it is a registry component. It can be found in the folder " Windows\system32\config", which is located on the system disk.

It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell it to you. For work we need special program. At the same time, each step must be performed with extreme caution, because this can radically change the entire process.

We will use Active password changer. In addition, we will need a clean flash drive.

So, to remove the password prompt, you need to:

If everything goes as it should, no problems should arise in the future, since only the components we need are changed in the system area.

The only downside is that some relatively older motherboards may not support starting with portable memory. In this case, you can use a plastic disk.

Well, as you can see, there are several different ways to remove or change your account password. At the same time, they are absolutely simple, you don’t even need to watch the video. By strictly following the instructions, everyone will be able to gain access to the necessary information.

I hope everyone here will find an option that will help them cope with the problem. Subscribe and tell your friends about me!

Almost always our electronic devices are password protected. Often we do this just in case, just in case. After all, why do this if your PC or laptop is used only at home, with loved ones, or in the office, when no one has access to it? Let's say you decide not to burden yourself with remembering complex combinations of symbols and numbers. The question arises: how to remove the password from your computer when you turn it on? First, we take the code from the administration and the password reset disk.

What is the administrator password and how to remove it

When you turn on your computer or laptop for the first time, each user is asked to come up with and enter a security code. We do this and write it down somewhere so that next time we can log into our device. This combination is the administrator code. Now let's look at how to remove the password. To do this, we launch the operating system and find ourselves in it as an administrator. We go along the following path: “Start”, “Control Panel”, “User Accounts”. Click on the last logo and in front of us is the administrator account. To the left of the image is the “Delete your password” tab. You'll have to enter it again. And that's it, it's done.

Removing user account passwords and user accounts themselves

Creating a password reset disk

It also happens that you forgot your password. To prevent this from becoming a big problem, users create a password reset disk. Using it, you can easily reset and log in. How to do it? Simple enough. You need a flash drive with a minimum of free space; the information on it will not interfere or be damaged. Consider the following factors: the disk must be made for all accounts; if you create several flash drives, only the last one will work; When changing the password, there is no need to create a new disk; the old one will function. Now about the process itself. In “Start”, click on the photo of your account and insert the external memory into the device. Select “Create a password reset disk”, a new window will open, click “Next”. Select your flash drive, enter your account code and click “Next”. The process itself will begin, during which you will need to click “Next” again, and then “Finish”. All! In external memory a userkey.psw file appeared, which is responsible for the reset operation.

How to remove the password from your computer when you turn it on using a reset disk

Something you have been afraid of for a long time has happened. When you turn on the computer, you need to enter a code, but it is lost and the memory is empty. What to do? And then you remember that not long ago you secured yourself by creating a flash drive with a reset password. Find it and try to log in without entering the code. A button appears that says “Reset Password.” Click on it and insert the saving flash drive. If you want to have a new password to log into the system, enter it twice and a hint; if you don’t want it, just click “Next.” That's it, the code is reset. In fact, it is recommended to have a password when you turn on your computer. So keep it well or memorize it.

fb.ru

How to remove a password from a computer on Windows 8

Many users are interested in how to remove the password from a computer or laptop on Windows 8. In fact, it is not at all difficult, especially if you remember the login combination. But there are times when a user simply forgot the password for his account and cannot log in. So what should we do? Even from such seemingly difficult situations there is a way out, which we will talk about in our article.

See also: How to set a password in Windows 8

Remove password if you remember it

If you remember your password to log into your account, then you should not have any problems resetting your password. In this case, there are several options for how to disable the password request when logging into a user account on a laptop; at the same time, we’ll look at how to remove the password for a Microsoft user.

Reset local password

Method 1: Disable password entry in “Settings”

Ready! Now you won't have to enter anything every time you log in.

Method 2: Reset your password using the Run window

Thus, we did not remove the password, but simply set up automatic login. That is, every time you log in, your account information will be requested, but it will be entered automatically and you won’t even notice it.

Disable your Microsoft account

Ready! Now re-login using your new account and you will no longer need to enter your password and log into your Microsoft account.

Reset your password if you have forgotten it

If the user has forgotten the password, then everything becomes more difficult. And if in the case when you used a Microsoft account when logging in, everything is not so bad, then many users may have difficulties resetting their local account password.

Reset local password

Main problem this method is that this is the only solution to the problem and for it you need to have bootable USB flash drive your operating system, and in our case, Windows 8. And if you do have it, then that’s great and you can start restoring access to the system.

Attention! This method is not recommended by Microsoft, so you do everything you do at your own risk. You will also lose all personal information that was stored on the computer. Essentially, we will simply roll back the system to its original condition

You can now log in to your new user account using your new password. Of course, this method is not easy, but users who have already encountered the console before should not have any problems.

Microsoft password reset

Attention! For this method of solving the problem it is necessary additional device, from which you could access the Microsoft website.

Now, using the combination you just created, you can sign in to your Microsoft account on your computer.

We looked at 5 different ways how to remove or reset the password in Windows 8 and 8.1. Now, if you have problems logging into your account, you will not be confused and will know what to do. Report this information to friends and acquaintances, because not many people know what to do when the user has forgotten the password or is simply tired of entering it every time when logging in.

We are glad that we were able to help you solve the problem.

Poll: did this article help you?

Not really

lumpics.ru

How to remove the BIOS password from a laptop

Users set a password on the BIOS in order to protect their computer from unauthorized access. Setting a password is not difficult, and it will provide reliable protection, but if the password is set accidentally and it is safely forgotten, then difficulties may arise with recovery. Unlike desktop PCs, passwords on laptops are stored in non-volatile memory. To get a positive result, we follow the instructions.

There may be several ways to reset the BIOS password. It all depends on the laptop manufacturer. On many budget and serial models (TOSHIBA, ASUS, ACER, HP, SAMSUNG, etc.), resetting the BIOS password is enough simple operation. First of all, you need to study the documentation for the laptop. Consider whether there is a jumper on its motherboard. The jumper contacts are usually labeled CMOS, which is located next to the battery.

Turn off the laptop completely, find the jumper on the board, and connect the second pair of contacts with a jumper. After 10-15 seconds, return the jumper to its place. Instead of a jumper, some models may simply have a pair of contacts. Short them for a few seconds with any metal object. After this, the BIOS settings will be reset to factory settings.

Turn on your laptop. It won't load, but CMOS settings reset. A message may appear on the screen asking you to press the “F1” key, this should be done to install BIOS settings. After that, select “Save and exit”. Now the OS will continue loading without asking for a BIOS password.

In the event that the jumper is not found or it is not provided by the manufacturer motherboard, you can use another method. Pry the CMOS battery with something sharp and remove it for a while. Sometimes 5-10 minutes are enough for the BIOS to be reset, but it is better to increase the time to several hours. This operation must be performed when complete shutdown laptop, it is better to remove the battery.

On expensive laptop models, information security techniques may be more complex and reliable. On such motherboards It is almost impossible to crack the BIOS or OS boot password. But you can try by using programmatic method reset the BIOS password. Log in to the operating system as “Administrator”. Find command line in the "Accessories" folder and enter the command "debug.exe" and press "Enter". Enter the following commands in sequence, pressing "Enter" at the end of each: "o702E", "o71FF", "q". After rebooting the laptop, a CMOS error message will appear on the screen and you will be prompted to reconfigure the BIOS. It means that BIOS settings reset and you can optionally restore the parameters or leave them unchanged.

Since all methods of resetting a BIOS password (zeroing) may not give the desired result, before you password-protect a laptop through the BIOS, you need to weigh everything carefully. There may be no reset jumpers, and removing the battery does not always help. If the password is still set and none of the described methods are suitable for your laptop model, you could not reset the password, then all that remains is to contact the service center.

Many users set a password on their PC so that others cannot access the information. But sometimes a secret word or phrase is forgotten, and as a result the person himself cannot log into the system. However, there is no need to despair, everything can be fixed.

This article talks about how to remove the password from a laptop.

Removing the password from the laptop

If you remember the password, but just don't want to use it in the future, you can disable it. To do this, at the initial stage of booting the PC, you need to press the Del or F2 button, enter the password and enter the BIOS. Then select the item “Change Password”, enter Old Password and the changes are saved.

If the password has been forgotten, you can reset it mechanically. To do this, you will need to remove the bottom cover of the laptop by unscrewing several screws. Then you need to find a tablet-shaped battery, remove it from the socket and close the contacts using a screwdriver. Then you should install the battery in its original place and turn on the laptop.

Removing the password from Windows 8

Open Home screen by pressing the Win key and typing the word Netplwiz. Thanks to this, you will be able to call the “User Accounts” program, which will help you set up login.
Uncheck the “Require username and password” checkbox. You will be asked to provide the password that is used to log into the OS on this moment. This condition must be met for the changes to take effect.
Now you need to restart your laptop. When the OS boots, the “Sign in to your Microsoft account” window will appear, in which you must enter the password for your account Microsoft records. If you still don’t have it, then you should register, this will give you access to many applications that will help make your work with Windows 8 easier.