In this article we will demonstrate a solution to the difficulties that are usually encountered when installing Windows 7 (or other operating systems) on a netbook. For example, we took the ASUS Eee PC 1015pe netbook.

The main advantage of a netbook is its compactness and lightness. This was realized thanks to small size screen and lack of CD/DVD drive. The last fact, in fact, makes impossible installation operating system in the usual way from the installation disk. However, fortunately, there are other means.

Creating a Windows 7 installation USB-Flash drive

Let's, first of all, take a point-by-point look at what we need to create a bootable/installation flash drive:

• • USB flash storage device
  • Windows 7 x86/x64 installation disk or its ISO image
  • WinSetupFromUSB 1.0 program
  • Second computer or laptop

WITH USB flash drive , we hope everything is clear. If your netbook supports booting from SD cards, - you can write the Windows installer onto it. In our example, we used a USB flash drive.

It is better to have the original installation disk/image, i.e. DO NOT ASSEMBLE. You can easily find original MSDN Windows images on the Internet. They are perfectly “treated”, and you can always find out exactly how on the Internet. PLEASE NOTE that before downloading the image, check processor capacity Your laptop. ASUS Eee PC, for example, is built on the basis 32-bit processor Intel Atom™ N550. For such processors, the name of the installation image must contain the label x86. For 64-bit processors - x64.

We will also definitely need a special program that will turn our flash drive or SD card into a bootable and installation one. In our example we used WinSetupFromUSB 1.0- the most optimal program in all respects.

And finally, we will definitely need a second computer in order to properly prepare the flash drive. We will perform all the actions described in the next section on it.

Step-by-step instructions for creating a bootable USB flash drive

Download the application, unpack it to any folder and run.

At the top of the window, click on the button "RMPrepUSB". In the window that opens, in the “3 BOOT OPTIONS” field, select the first item (as in the picture), in the “4 FILESYSTEM and OVERRIDES” field, specify the system NTFS, then click on the button Prepare Drive and wait until the procedure is completed.

After the flash drive has been prepared by the previous procedure, close the window RMPrepUSB. In the main program window in the field "Add to USB Disk» select line "Vista/7/Server 2008...". Next, paste installation disk Windows 7 into a computer drive or mount his image on virtual drive(). In the WinSetupFromUSB program window, in the line you select, specify the path to the installation files. In our example, we mounted a disk image onto a virtual DVD drive (disk G: in the screenshot).

Click on the button "GO" and wait until the files are copied.

After everything is ready, the following will appear on the flash drive: Windows installation files 7. Everything, ours installation flash drive and ready!

Booting from the installation USB-Flash drive on a netbook

The next important step is to boot correctly from the installation flash drive. By default, booting on a netbook is done from the internal HDD drive. You can change this option in BIOS.

Before starting your netbook, make sure that flash drive inserted into USB port. Turn on the computer and at the moment of boot click on the key launch BIOS. When loading you will see the following message: "Tap (key) for Setup" or “Press (key) to enter BIOS”. On ASUS laptops this is a key F2. On other netbooks, the BIOS can be launched using keys F10, Delete and etc.

So, in the BIOS we need a section "Boot"(loading). In the ASUS Eee PC BIOS, first of all, you need to set the boot order from drives (priorities of internal-external hard drives, flash drives, SD cards, etc.). Click on the option « Hard Disk Drives" and in the window that opens, first indicate your Flash card.

Return to the main window and on the tab "EXIT" select option "Save Changes & Exit"(“Save changes and exit”).

The next time you turn on the netbook, it will boot from our installation flash drive. You will see this window:

This is the so-called bootloader, installed by the program WinSetupFromUSB to our flash drive. Select an item “Start Vista/Win7/Server 2008 Setup Or PE/Recovery ISO from partition...” and press ENTER.

Finally, you will see the long-awaited Windows installation window.

Conclusion

You can intuitively understand how to proceed next by following the prompts on the screen. However, let me remind you of one important detail. After all installation files have been copied, the computer will restart. Don't forget to remove the flash drive, otherwise the computer will boot from it again and you will again see the initial Windows installation window. If this does happen, don’t be alarmed. Just remove the flash drive from USB port and reboot your netbook. Windows installation will continue on its own.

As always, we hope that our article helped you. We are waiting for likes, reviews and comments!

Detailed Image Burning Guide Windows disk 7 on a flash drive and step-by-step instruction for installing an operating system on a netbook via BIOS.

Navigation

operating system Windows 7 considered one of the most successful products of the corporation Microsoft. Despite the fact that a more recent and no less successful Windows 10, many users are in no hurry to abandon the “seven”, since it requires less system resources and is great for weak computers.

As a rule, purchase a disc with a licensed version Windows 7- no problem. The trouble is that it is simply impossible to install an operating system from it on a netbook that does not have a disk drive. The only option is to write the operating system image to a USB flash drive or SD card.

From our article you will learn how to record an image Windows 7 on a flash drive and how to install an operating system on a netbook from it via BIOS.

How to install or reinstall Windows 7 on a netbook from a flash drive via BIOS: instructions

Users who have never had to install operating systems from flash drives or memory cards may initially consider this task too complicated for myself. But we hasten to assure you that this process is practically no different from a regular installation. Windows 7 from disk. The most important thing is to prepare properly. For installation you will need the following components:

• Operating system distribution Windows 7;
• A specialized program that will be used to record a system image onto removable media;
• Basic PC user skills;

The programs will be responsible for all basic manipulations during the installation process. You just need to set appropriate tasks for them. The installation guide presented in our article Windows 7 will help you install the operating system on any netbook model from any manufacturer. So let's get started.

• The first and main component to install Windows 7 is an operating system disk image. On official Microsoft website users are allowed to download one of these images for recording on a flash drive. However, before downloading the distribution Windows 7 You need to prepare an activation key, which is needed to register the operating system and obtain a license. Without an activation key you will not be able to install the licensed version Windows 7.
• If you do not have an activation key, then you can buy it online or in a store. If you don’t want to spend money, you can download a pirated copy of the operating system disk image on one of the many torrent trackers. For example, good custom assemblies can be found on the website maintracker.org .
• Don't rush to download the first disk image you come across. To prevent you from having any troubles with the operation of the operating system in the future, we strongly recommend that you avoid custom assemblies that contain third-party programs and custom system configurations. For correct operation Windows It is best to download a “clean” image of the operating system. To find one, carefully read the distribution description and user reviews.

Preparing and creating a bootable USB flash drive

After you have downloaded the appropriate distribution Windows 7, it’s time to write it to a USB flash drive or SD card, the volume of which should be at least 4GB. Writing a disk image to removable media is carried out using specialized utilities. You can find a great variety of them on the Internet, but the simplest and most convenient, in our opinion, is the program Rufus. Free download this program may with official website developer.

IMPORTANT: Remember that in the process of creating a bootable USB flash drive, it will be completely formatted and all data from it will be deleted. If on your removable storage important documents are stored, before you start recording an image on it, transfer all valuable folders and files to HDD or other removable media.

To burn a disk image to removable media, follow a few simple steps:

Step 1.

• Insert the previously prepared removable media into the computer, then download, install and run the program Rufus.
• In the column " Device» select from the list your USB flash drive or SD card on which the image will be written Windows 7.
• Leave the remaining three lines at their default values.

Step 2.

• In chapter " Formatting options» indicate the type of your distribution Windows 7. It may have the format ISO, MDF or even RAR.
• By clicking on the drive icon, find and select the pre-downloaded operating system image.

Step 3.

• Check the boxes next to the last three lines, as shown in the figure below.
• After checking the box opposite " Create boot disk » two installation options will appear Windows. Highlight " Standard installation Windows" and click the button " Start».

• Wait for the image burning process to complete and proceed to the next section of our article.

Setting up BIOS to boot from a flash drive

After the bootable USB flash drive has been created, you need to set the settings for booting the computer from the flash drive to BIOS. If you ignore this step, the PC will not recognize the device and will load the already installed operating system in normal mode.

To get in BIOS can be done by pressing a specific key on the keyboard almost immediately after turning on the PC. On laptops and netbooks of different models and brands can be installed by default different keys or key combinations to enter BIOS. Most commonly assigned keys Delete, F2 or Escape, however, there are exceptions. In the table below you can see the key combinations for entering BIOS on different models laptops and netbooks from different manufacturers:

There are several versions in total BIOS, however, the download priority setting we are interested in is set almost the same in each of them. This setting should be in a section whose title includes the word “ Boot" So to set up BIOS To boot from a flash drive, you need to follow a few simple steps:

Step 1.

• Restart your computer and sign in BIOS, using a key or key combination suitable for your PC (often a prompt appears on the monitor with the name of the key to enter).
• A signal that you have entered BIOS A window like this will appear on your screen.

Step 2.

• Using the keyboard arrows, go to the “ Boot" and find the section " Boot Device Priority" Enter it using the " Enter».

Step 3.

• You will see a list of your devices, which should also include your USB flash drive. If it is there, then use the arrows to go to the first line, click “ Enter", in the window that opens, select your flash drive and click " Enter».
• Thus, you will set the flash drive to high priority, and now the computer will boot from it in the future.

Image 9. List of devices connected to the computer and setting the priority for the flash drive.

Step 4.

• If the list contains only a floppy drive and a hard drive, and the flash drive is missing, return to the previous menu with the “ Esc" and go to the section " Hard Disc Drives».
• Your flash drive should be in the second line. Use the arrows to go to the first line, click " Enter" and in the window that appears, select your flash drive.
• After that, repeat Step 3.

Step 5.

• All necessary settings are set and all that remains is to save the changes. To do this, click the " F10" and in the window that appears, click " Ok».
• The computer will reboot.

Installing Windows 7 on a netbook via BIOS from a flash drive

If you completed all the steps correctly, then after restarting the computer, reading data from the flash drive will begin. A signal for this will be the appearance on the monitor of such inscriptions and stripes:

After the loading bar disappears, the installation will begin. Windows 7. You will need to perform the following steps one by one:

Step 1.

• After a short period of time, the installation start window will appear on the monitor Windows 7, where you will have to specify the language settings for the operating system, time format, currency units and keyboard layout language.
• After selecting the required parameters, left-click on the button “ Further" and in the next window click on the button " Install».

Step 2.

• At the next stage, you will need to agree to the terms of the license agreement, click on the “ Further" and in the new window that opens, select the item " Full installation».

Step 3.

• A window with a list of partitions will appear on the monitor hard drive and action buttons that you can apply to them. You will need to select a partition on which to install your new operating system.
• The partition on which the old copy of the operating system is located is marked as system. Install a new copy Windows 7 It’s best to just go for it. By installing the OS on another partition, you will end up with two copies Windows.
• Select the system partition and click on the " Format" This action will delete the old copy Windows and all data stored in the partition.
• If you do not want to delete the old copy Windows, then you have the right to refuse to format the section. In this case, all data from the old OS will be saved in the folder Windows.old on the system disk. But it is best to install the operating system on a clean partition.

Step 4.

• After formatting the disk is complete, select the partition to be installed and click on the " Further».
• A window will appear on the monitor displaying basic information about the installation progress. Windows 7. For 15 – 20 minutes, the installation program will unpack and write operating system files to the hard drive, install components and update packages Windows.

Step 5.

• After the installation is complete, the program will display a notification on the screen that the computer will restart in 15 seconds.
• Once the computer has restarted, remove the flash drive from the USB port! If ignored of this action the computer can start installing the operating system from the very beginning.
• After the PC boots, a notification will appear on the monitor indicating that the installer is updating the registry settings. Wait for this process to complete.

Step 6.

• Finally, a window will appear where you need to set parameters for account administrator and enter the name of the computer. Enter the computer name and click on the " Further».
• You will be prompted to set a password for the administrator account. You are free to ignore this step by clicking on the “ Further».

Step 7.

• At the next stage you will be required to enter an activation key Windows 7. If you have it, enter it in the appropriate field.
• If the key is missing, uncheck the line " Automatically activate Windows when connected to the Internet" and click on the button " Further».

Step 8.

• The next step will require you to set protection settings Windows. If you are an inexperienced PC user, we advise you to select the “ Use recommended settings».

Step 9.

• Next, you will first need to select your time zone, and then set your Internet settings. We recommend selecting " home network».

Step 10.

• Congratulations! You installed it yourself Windows 7 from a flash drive to your netbook. Now you can proceed to designing your desktop, setting up the necessary parameters and begin to fully use the operating system.

We remind you that this method installation of the operating system is suitable for both desktop computers and laptops/netbooks from manufacturers Asus, Samsung, Lenovo, Acer and everyone else.

VIDEO: Installing Windows 7 from a flash drive on a computer and netbook

For some people it sounds crazy when you explain to them that the new netbook they bought with Windows 7 Starter cannot be installed. in a standard way set the picture to your desktop. Yes, you can install a special program that will hang in memory and constantly display the image on the desktop.

After this, many demand to install their “native” Windows XP and even offer money. Since the system administrator is a highly moral being who cannot refuse the money offered, he has to take on the job of reinstalling Windows XP on a netbook without a CD-ROM.

Personally, for me, from a moral point of view, it is wrong to install Windows XP on a netbook with a real and valid Windows 7 license, although Starter, but as they say, the master is the master. Consistent with my moral principles and putting money in my pocket, I install Windows XP on clients' netbooks every time.

I have already installed Windows XP on a large number of netbooks and I can say that, in principle, the algorithm of actions is the same for all of them. For these purposes, I use a popular distribution - ZverCD, which I would not use for personal purposes, since it is a bit heavy. And it’s just right for clients, as it makes it easier to find drivers after installation.

What do we need to install Windows XP on a netbook?

To install Windows XP on a netbook we need:

1. Windows distribution. I think it won’t be difficult for you to find, since there is a lot of this shit on the Internet. Take at least ZverCD.
2. A flash drive or, smarter, a USB drive that can store 1GB of information.
3. Program WinToFlash which you need to download from here.

The latest WinToFlash program, in turn, can do one thing - create bootable USB flash drive from Windows. In our case with XP.

I would like to say right away that WinToFlash does not work with CDs and ISO images. She works with system files operating system, that is, if you have ISO- Windows image XP, then you need to unpack it with any archiver.

The algorithm for installing Windows XP on a netbook can be described as follows:

Details Updated January 27, 2017 12:56 Published January 27, 2017 11:02 Author: nout-911

Installing Windows on a netbook: how to do it right?

After purchasing a netbook, it may be necessary to install an operating system on it - the gadget may be sold without it, or the user may want to install a different OS. Installing windows on a netbook more difficult than on a desktop computer or laptop due to the lack of a disk drive. But still, a solution exists, and almost every user can use it.

Installing Windows on a netbook - a step-by-step guide for beginners

In order to install an operating room Windows system on a netbook, you will need the following:

1. Memory card or flash drive with a memory capacity of at least four gigabytes.
2. Operating system (you need an ISO image, to create which you can use a special program or download a ready-made image of the required version of the operating system).
3. A program for creating a bootable drive for installing the operating system.
4. A little patience.

If the netbook already has an operating system installed, you should do backup copy everyone important files. If the system is not installed, you will need another working computer to create a boot image.

Installing Windows on a netbook: original image or build?

Experts strongly recommend installing the original version of the operating system, and not the assembly. Despite the apparent advantage of the assemblies - the presence of drivers and a minimum set of additional software, they carry a certain danger in the form of unstable operation and the presence of malware. Therefore, it is better to install the original operating system, and the drivers and necessary software install manually.

Step 1 – Disk and Media Cleanup

Before you start creating a boot image, you must hard formatting laptop disk, dividing it into the required number of partitions, as well as the media from which the installation will be performed.

Step 2 – create a bootable USB flash drive

Next, you should create a bootable USB flash drive from which the operating system will be installed on the netbook. There are several free programs for this. Using them is quite easy - just select the required flash drive, specify the path to the image file and follow the instructions on the screen. Capturing the image usually takes only a few minutes.

In some cases, it may be necessary to integrate SATA drivers into the operating system image, without which it will not install. To do this, you will need the drivers themselves, downloaded from the official website, as well as free program nLite.

Step 3 – install Windows and necessary software

To install a prepared Windows OS on a netbook, you first need to boot into the BIOS and select boot from a flash drive in the appropriate option, then select the Save Changes & Exit option.

Further actions are no different from those performed when installing the operating system on a desktop computer or laptop - you need to follow the instructions on the screen, and then wait until Windows copies everything necessary files and complete other necessary actions (usually this does not take more than 20-40 minutes, depending on the version of the operating system being installed).

After installing Windows, the netbook will reboot. If you do not remove the drive from which the installation was performed at this stage, the operating system installation window may reappear after booting. But there's no need to panic. Simply remove the drive and restart the laptop again.

Now you can start installing drivers from the disk, or by first downloading them from the official website of the netbook manufacturer. The driver installation process may require several reboots. And only after that you can install the necessary programs.

The easiest way to install Windows on a netbook

The algorithm of actions described above is intuitive and does not require special skills. But still, difficulties may arise at certain stages:

• there is no access to a work computer on which you can create a bootable USB flash drive.
• operating system image files are not working or there is no media on which to burn the image.

It is very simple to protect yourself from all possible troubles that may arise during the installation of Windows on a netbook - just contact specialists who have been doing this for many years and have all the necessary skills and software.

Qualified technicians will not only install an operating system on a netbook, but also offer Additional services, such as:

• choosing the version of Windows that will be installed on the gadget with consultation on the most optimal choice.
• partitioning the hard drive.
• installation of drivers provided by the gadget manufacturer.
• installation of the most necessary accompanying programs for the most comfortable start of using the netbook.
• Tips for maintaining the operating system in good condition.

Turning to the professionals of NOUT-911 and trusting them installing Windows on a netbook from any manufacturer, you can save a lot of time and nerves by quickly receiving your electronic assistant in fully working order and ready to perform the tasks that will be assigned to it. And all this for a reasonable fee. This is why many people choose this method of installing Windows on a netbook instead of doing everything themselves and being nervous if something goes wrong.

Do you have a problem reinstalling Windows on your netbook? This step by step guide will help you cope with this task without much effort. Any user, even a beginner, can do this by reading the instructions provided. So, what is reinstalling Windows, and how to do it correctly, without the help of a specialist?

To reinstall Windows yourself, you need to start with preparation. First we have to take care of the information we already have on the hard drive.

Preparatory stage

This instruction can be used for various models netbooks from manufacturers Lenovo, ASUS, Acer and others. In principle, the described process will also apply to regular desktop PCs.

Before you start reinstalling the OS, you need to save the valuable data on your netbook that you have accumulated while using the old operating system. You can transfer them to an external hard drive or a flash drive of a suitable size, depending on the size of the information that needs to be saved.

It is important to remember where valuable data may be located. For example, if the current system is an older one Windows version, for example XP, then you should look at the contents of the desktop, the “My Documents” folder. It is also possible that you have once saved something directly on the system drive, usually drive C.

Of course, list everything possible options where important data may be stored is very difficult, but we will still give good advice: look through everything carefully, so that later you do not regret some forgotten photograph that captured one of the pleasant moments of your life.

Why is this necessary? The point is that our task is to fulfill complete reinstallation Windows, and this implies the need to format the partition where we will install the new system.

Why is it recommended to completely reinstall Windows rather than update it? Everything is simple here. While using the previous OS, viruses may have accumulated that are sitting in files that you don’t even know about. For this reason, most experienced users practice a complete reinstallation. Let’s say right away that if accumulated viruses are the only reason why you are thinking of reinstalling Windows, then you should think about whether this is really the last option, because you can often get rid of malware in easier ways.

Determining the bit depth of Windows

Before you start installing a new system, let's talk a little about the bit capacity of the system on which you are planning to reinstall the current OS. Please keep in mind that Windows can be 32-bit or 64-bit. Among other things, these versions differ in that the 32-bit architecture cannot address more than 4 GB of RAM. We also immediately need to decide which Windows we will install - licensed or not.

• Inability to install system updates
• Embedded viruses and other malicious software
• Deactivated services
• Various Windows errors, which you will not find out about right away, and many other troubles

Using a flash drive as a carrier for the installation distribution

To install Windows on a netbook, we need a flash drive, since netbooks, due to their compact size, do not have a CD reader or DVD discs. In fact, many seem even more simple option. After all, you can reinstall the system from this type of media on almost any computer, be it a netbook, laptop or just a desktop PC. USB sockets are available on all modern computers.

Making a bootable USB flash drive

Of course, simply copying the contents of the Windows distribution to a flash drive will not work. Additional operations must be performed, otherwise reinstalling Windows on the netbook will not work. But there is nothing complicated here, just place the image of the system you want to switch to on a flash drive. For this there are special programs, for example, you can use such a popular tool as UltraISO:

As soon as the image new Windows will be recorded on the USB flash drive, you can begin installing the system. Let me remind you once again that you must first save all important information from the system disk. There will be no such opportunity again.

Now we reboot our netbook and go into the BIOS, for which at the very beginning of the computer boot we need to have time to press F12or the Delete key.

Here you need to specify booting from a flash drive as the first priority.

As soon as we have done this, we exit the BIOS, saving the settings made, after which the netbook will reboot again. Next, loading from the flash drive should begin and, accordingly, .

Installation process

At this stage, the Windows installer and the initial window of the first step of system installation should already load. For different versions Windows steps may vary slightly, but in quality general rule We can give the following recommendation: you should not immediately click next without familiarizing yourself with what the next step is. As a rule, at one of the installation stages you will need to check and, if necessary, specify the correct date, time, time zone, language settings, and so on.

The only step you don’t have to dwell on is accepting the license agreement, which contains standard text that probably doesn’t make much sense to read.

It is important not to make a mistake at the stage where you will be asked to select the installation type:

• update
• full installation

We must definitely indicate the second option “Full installation”, since we want to install a clean system, and not update the old OS, as was mentioned at the very beginning.

After this, a window will open to select the partition where you want to install Windows. Here we can safely indicate the partition on which our current old system is installed, after which the specified logical drive will be formatted. Of course, we have already saved all the important information from the system disk and will not lose anything during the formatting process.

After formatting is completed, the OS installation process will begin. This usually takes 30-60 minutes on netbooks due to their low performance, although it can go faster if you have a more modern and powerful computer.

When the installation is complete, already new system Windows will ask you for your name, as well as an optional administrator password.

You may then need to install additional parameters, such as network setup. Here, in most cases, you can agree with the recommended parameters, so that later they can always be changed from the operating system interface.

Let me also remind you that Windows will not always be able to find drivers for all devices on your netbook, so you will need to check which drivers were not found and install them for the system to function properly.