Errors 

Internet setup after installing windows xp. Connecting Windows XP Professional to the Internet. Manually setting up a wireless WiFi connection

Instructions how to connect internet on Windows XP usually provided by a lazy provider. Who doesn’t want clients to disturb him with calls after every reinstallation of the operating system.

The topic of how to connect the Internet on Windows XP will be of interest to all users of this legendary operating system, the Windows series. I decided to “raise” this issue for the reason that although Microsoft had long ago announced a refusal to provide technical support for this OS, it still did not abandon its customers during the recent attack by Petey. As you know it was created software for its protection and restoration.

Well, in the next one, we write VPN server address, which the provider should provide you with:

This completes the creation of a VPN Internet connection for Windows xp and is in your folder Network connections its icon appeared.

Having opened it using RMB, we set its Properties, because without this item the connection will not work. Since all options are usually specified as standard, you can immediately go to the item Safety, where to uncheck the option Data encryption required.

After this, by pressing the button OK,you confirm the completion of all settings, and you can send the connection icon internet windows xp to desktop.

Settings pppoe connections FTTx or DSL "Home Internet" in Windows XP is a little more complicated than pppoe in Ubuntu, and it probably won't be done in a minute. Such a connection must be created to connect to high-speed cable access services, which are now provided by many telecom operators. If you have Windows 7 then read another article - Setting up PPPoE in Windows 7. But first, a little theory.

What is PPPoE

This abbreviation stands for: Point-to-point protocol over Ethernet. This is a tunnel protocol that runs on top of the Ethernet protocol used in local area networks. The fact is that the Ethernet protocol does not provide for user authorization. That is, access cannot be allowed or denied at the logical level via Ethernet.

The PPPoE protocol solves this problem. It is used to allow access to certain network resources to be controlled through a network connection. In practice, PPPoE is most often used to provide high-speed Internet access. Today, the most common high-speed Internet access is implemented using DSL (xDSL) technology. To an apartment or office, communication goes through a telephone wire; in the apartment (office) a DSL modem is installed and this modem is connected via network cable connects to the computer.

But now another technology is being actively implemented - FTTx:

  • FTTB (Fiber to the Building)- fiber optic cable to the building.
  • FTTH (Fiber to the Home)- fiber optic cable to the apartment.

A fiber optic cable is laid to a building or even an apartment, and a regular network cable is connected to it inside the building or apartment. Using this technology, the Internet is now provided by such telecom operators as Rostelecom (Home Internet service), MTS (Home Internet and TV service), Beeline (Home Internet service).

Regardless of which channel is used, DSL or FTTx, the connection settings on the client computer will be the same - this is the pppoe connection setting. With the exception of Beeline - they connect using the VPN protocol.

PPPoE Windows XP

Configure " home Internet" in Windows XP is easy.

Press the Win+R keys and enter “ncpa.cpl” in the dialog box, then click the “OK” button:

Then in the “Network Connections” applet window, click on “Network Connections Wizard”:

Or through the Start menu - Settings - Network Connections:

A wizard will launch, to which you will need to specify the parameters step by step, in the second window click the “Next” button:

In the third window, select “Set up a connection manually” and click “Next” again:

In the fourth window, specify “Via... the requesting username and password” and click the “Next” button again:

In the fourth window, specify the name of the connection and click “Next” again:

In the fourth window, enter your username, password and click “Next” again:

After this, a window will open in which you can establish a connection:

Connecting to the Internet in Windows XP

After the connection has been created, you can connect to the Internet using it through the Start menu - Settings - Network Connections - connection name:

After this, a connection dialog box will open, in which you need to click the “Connect” button.

Note. To disconnect from the Internet, you need to do the same, only the button will be " Disable".

Possible mistakes

Errors may occur when connecting to the Internet via pppoe. For example 651 connection error:

If such an error occurs, first try to connect again two or three times. Maybe it's just temporary failure. This error means that it was not possible to establish a pppoe session with a DSL concentrator or PPPoE server, while the Ethernet connection was established. The reasons for this may be different, for example, for MTS it may be a MAC address blocking network card your computer. To correct this error, you need to contact technical support your provider.

No matter what errors occur when connecting via pppoe, it is important to understand that this connection is created “on top” network connection Ethernet, so diagnostics should begin by checking the operation of the network card and network cable in the area from the computer to the router or modem.

Optional pppoe connection settings

After creation and pppoe settings connections, you can disable protocols that are not used in this connection. Open the “Network Connections” applet (see earlier in this article), then click on the network connection through which the incoming network cable is connected right click mouse and open "Properties" in the menu.

Then, in the connection properties, on the "General" tab, disable the "File Access Service", "Microsoft Networks Client" protocols and click "OK":

If you found this article useful or simply liked it, then do not hesitate to financially support the author. This is easy to do by throwing money at Yandex Wallet No. 410011416229354. Or on the phone +7 918-16-26-331 .

Even a small amount can help write new articles :)

After setting up the main workers Windows settings you can start configuration network equipment and network service settings to configure access to the World Wide Web.

Creating a network connection to the Internet is very simple. Many operations are automated and require the user to perform only a few steps, be it setting up dial-up access telephone line(dial-up) or high-speed connection.

To create an Internet connection, open the Control Panel window, click the Network and Internet Connections icon, and then the Network Connections icon. The window shown below will open.

To start creating a new connection, you must select the File>New connection command in the main menu or click on the Create a new connection link, which is located on the left side of the window. When you perform any of these actions, the New Connection Wizard window will open.

After reading brief information about the wizard's capabilities, click the Next button. In the new window you should select the type of new connection. Since you are creating an Internet connection, select the Connect to the Internet radio button and click Next.

In the next window you need to select a method to connect to the Internet. Select the Set up a connection manually radio button and click the Next button.

In the next wizard window, you need to select the type of device connected to the Internet.

This is one of the key connection steps. It is in this window that you can specify which device will be used to connect to the Internet - regular modem for a dial-up connection or modem for a high-speed connection (such as DSL or cable modem). In other words, setting up an Internet connection in Windows for different types connections are made almost identically.

In the next window, in the Service Provider Name field, you must enter the name of your Internet service provider. In most cases, the name of the connection is the name of the Internet service provider, but you can specify any custom name. Click the Next button.

Now you need to provide a username and password (usually your ISP will provide the username and password information). By checking the appropriate boxes you can enable Extra options account. After completing these steps, click the Next button to proceed to the final stage of creating an account.

Click the Finish button and the New Connection Wizard will be completed. To add a shortcut to the created connection on your desktop, select the Add connection shortcut to desktop checkbox.

After completing all of the above steps, the icon for the created connection will be presented in the Network Connections window. To connect to the Internet, double-click on this icon and in the window that opens, click on the Call button. To simplify the connection task, it is recommended to place a shortcut to the created connection on your desktop. If you did not create such a shortcut when you finished the New Connection Wizard, right-click the connection icon and select Create Shortcut. Then transfer the created shortcut to your desktop.

The Windows XP operating system appeared in the early 2000s, but is still installed on older computers. The article will tell you how to set up the Internet on Windows XP with different protocols. We will illustrate each option with screenshots with a detailed description.

The user accesses the Internet in two ways: via a network cable or via Wi-Fi. In both cases, the provider's patch cord must first be routed into the client's living space and then connected to the router or directly to the PC.

The publication does not consider the use of operator USB modems cellular communication to access the World Wide Web on Win XP.

Direct cable (wire) connection

A cable connection means that the computer accesses the Internet through a network cord. If the user has connected a wire to the network card connector of the workstation, configuration is performed on it.

In other options, configuration is carried out on network equipment (ADSL modem, router, etc.).

Peculiarities:

  1. The signal is stable and clear. If it starts to fail, in most cases it is a cable problem.
  2. The length of the cord does not allow you to move the laptop around your apartment or office.
  3. Speed ​​is faster than older versions of Wii protocols.
  4. Configuring network equipment to access the Internet is easier.

If the user has a laptop, it is usually equipped with a module wireless communication. Exceptions are models that went on sale more than 10 years ago. The general scheme looks like this.

The provider's cable connects to the router, which has a network wireless adapter. It is configured according to the requirements of the provider, after which the Internet is distributed via WiFi. The signal strength depends on the power of the antennas.

Peculiarities:

  • Free movement within the router's range.
  • No extra wires.
  • You need to install drivers for your wireless adapter.
  • Additional authorization when connecting to Wi-Fi.

Step-by-step instructions for creating and setting up an Internet connection on the Windows XP operating system

Let's consider different variants, how to set up the Internet on Windows XP, depending on the type of connection. For each method we provide instructions with screenshots

Important! To establish stable Internet access, follow the instructions below. The equipment must be new or undamaged.

Setting up IP address and DNS servers

Configure settings network adapter necessary as follows. Click “Start”, select “Control Panel”. Find the “Network Connections” section and open it.

In the new window, right-click on the “Connect via local network", then - "Properties". Select the section as shown in the screenshot below and click “Properties”.

The parameters are issued by the provider in the annex to the service agreement. In most cases, values ​​are assigned automatically, but in remote regions of Russia a manual mode is used.

Important! Before configuring your router or ADSL modem, you need to go into your network connections and check the values ​​of the IP address, gateway and DNS servers. They should receive addresses automatically.

After making changes, click “OK” to save the configuration.

Create a VPN connection tunnel

The VPN tunnel is created using the PPTP or L2TP protocols. The Internet access service provider issues brief instructions with the exact value of VPN server addresses.

Open the “Network Connections” item through the “Control Panel”. On the left side, select “Create a new connection.”

To connect to the Internet via a VPN server, check the second box.

The next step is “Connect to a virtual private network.”

We fill in the data that the installer asks for step by step:


Important! Check the “Add shortcut” box to connect to the Internet in a few seconds.

When the Installation Wizard is completed, the screen will open Workspace to enter your username and password. Click "Properties".

Switch to the “Security” tab. We set the parameters as shown in the screenshot below.

Click “Ok” to return to the previous area. In order to establish a connection with an external network, click on “Connection”.

Setting up a PPPoE connection

PPPoE (Point-to-Point over Ethernet) is a link layer protocol that transmits information over Ethernet. Mainly used by xDSL equipment.

To establish an Internet connection in Windows XP using the PPPoE protocol, go to “Network connections”, option – “Create a new connection”. We switch to manual configuration mode.

Next, you need to enable the “Create a high-speed connection” option.

We come up with an arbitrary name.

Next, enter the subscriber’s credentials, which are issued by the provider when concluding the contract.

Upon completion of the manipulations, the following window will be displayed on the user’s screen.

Click “Connect” to access the World Wide Web.

Possible errors and ways to eliminate them when setting up and creating a connection

Let's list the most common mistakes, which are found in Windows HP, as Russian-speaking users write, when setting up Internet access:


Another option: non-native drivers are installed. This situation occurs with laptops. We go to the official website of the manufacturer, find the model we are looking for and download the drivers.

Important! The downloaded software must be compatible with WindowsXP. This information is listed next to the driver version.

If the user uses third-party software, go to the properties of the antivirus and also turn off the firewall.

If the above methods do not help resolve the problem, reinstall the service. We delete the current configuration through the “Network Connections” menu. We go in, select the created option and right-click on the “Delete” item.

After this, we run the repeated algorithm.

Conclusion

The article talked about how to connect the Internet to Windows XP via cable using different protocols. Given step by step instructions with screenshots, typical problems are discussed and solution methods are described.

1. Click Start, select the Control Panel menu item;

2. At the top left, select Switch to classic view;

3. Click the Network Connections icon;

4. Right-click on the Local Area Connection icon; and select the Properties menu item;

5. Uncheck Internet Protocol TCP/IP; and c When connected, display the icon in the notification area; and click OK;

6. Confirm disabling components by clicking Yes;

7. In Network tasks; select Create a new connection;

8. The New Connection Wizard will start; click Next;

9. Leave the Connect to the Internet option; and click Next;

10. Select Set up a connection manually; and click Next;

11. Select Via broadband connection prompting for username and password; and click Next;

12. Enter the name of the omkc service provider; and click Next;

13. Enter the username, password and password confirmation given to you (the password and confirmation must match, all fields are filled in case sensitive) and click Next;

14. Check the box next to Add a shortcut to desktop; and click Finish;

15. To connect to the Internet, click the Connect button;