One of the common hobbies of amateurs and professionals in the field of electronics is the design and manufacture of various homemade products for the home. Electronic homemade products do not require large material and financial costs and can be performed at home, since work with electronics is, for the most part, “clean”. The only exception is the manufacture of various body parts and other mechanical components.

Useful electronic homemade products can be used in all areas of everyday life, from the kitchen to the garage, where many are engaged in improving and repairing car electronic devices.

Homemade products in the kitchen

Kitchen electronics crafts can be a complement to existing accessories and fixtures. Industrial and homemade electric kebab makers are very popular among apartment residents.

Another common example of kitchen homemade products made by a home electrician is timers and automatic switching on of lights above work surfaces, and electric ignition of gas burners.

Important! Changing the design of some household appliances, especially gas appliances, can cause “misunderstanding and rejection” by regulatory organizations. In addition, it requires great care and attention.

Electronics in the car

Homemade devices for cars are the most wide use received among owners of domestic brands of transport, which are distinguished by a minimum number of additional functions. The following schemes are in wide demand:

• Sound indicators for turns and handbrake;
• Operating mode indicator battery and a generator.

More experienced radio amateurs are equipping their cars with parking sensors, electronic window drives, and automatic light sensors to control low beam headlights.

Homemade crafts for beginners

Most novice radio amateurs are engaged in the manufacture of structures that do not require high qualifications. Simple proven designs can serve for a long time and not only for the sake of benefit, but also as a reminder of the technical “growing up” from a beginner radio amateur to a professional.

For inexperienced hobbyists, many manufacturers produce ready-made construction kits that contain printed circuit board and a set of elements. Such sets allow you to practice the following skills:

• Reading schematic and wiring diagrams;
• Correct soldering;
• Setup and adjustment using a ready-made method.

Very common among sets Digital Watch various designs and degrees of complexity.

As an area of ​​application of knowledge and experience, radio amateurs can design electronic toys using simpler circuits or modifying industrial designs to suit their wishes and capabilities.

Interesting ideas for crafts can be seen in the examples of making radio-electronic crafts from worn-out computer parts.

Home workshop

To independently design radio-electronic devices, you need a certain minimum of tools, devices and measuring instruments:

• Soldering iron;
• Side cutters;
• Tweezers;
• Screwdriver Set;
• Pliers;
• Multifunctional tester (avometer).

On a note. When planning to do electronics yourself, you should not immediately take on complex designs and purchase an expensive tool.

Most radio amateurs began their journey by using a simple 220V 25-40W soldering iron, and the most popular Soviet tester, the Ts-20, was used in the home laboratory. All this is enough for practicing with electricity, acquiring the necessary skills and experience.

There is no point in buying an expensive soldering station for a novice radio amateur if he does not have the necessary experience with a conventional soldering iron. Moreover, the possibility of using the station will not appear soon, but only after sometimes quite a long time.

There is also no need for professional measuring equipment. The only serious device that even a novice amateur may need is an oscilloscope. For those who already understand electronics, an oscilloscope is one of the most sought-after measurement tools.

Inexpensive digital devices made in China can be successfully used as an avometer. Having rich functionality, they have high measurement accuracy, ease of use and, importantly, have a built-in module for measuring transistor parameters.

When talking about a DIY home workshop, one cannot fail to mention the materials used for soldering. This is solder and flux. The most common solder is POS-60 alloy, which has a low melting point and provides high soldering reliability. Most solders used for soldering all kinds of devices are analogues of the mentioned alloy and can be successfully replaced with it.

Ordinary rosin is used as a flux for soldering, but for ease of use it is better to use its solution in ethyl alcohol. Rosin-based fluxes do not require removal from installation after operation, since they are chemically neutral under most operating conditions, and the thin film of rosin formed after evaporation of the solvent (alcohol) exhibits good protective properties.

Important! When soldering electronic components Under no circumstances should active fluxes be used. This is especially true for soldering acid (zinc chloride solution), since even under normal conditions such flux has a destructive effect on thin copper printed conductors.

To service heavily oxidized terminals, it is better to use active acid-free flux LTI-120, which does not require rinsing.

It is very convenient to work using solder that contains flux. The solder is made in the form of a thin tube, inside of which there is rosin.

For mounting elements, breadboards made of double-sided foil fiberglass, which are produced in a wide range, are well suited.

Security measures

Working with electricity is associated with risks to health and even life, especially if the electronics are designed with your own hands with mains power. Homemade electrical devices should not use transformerless power from a household AC network. As a last resort, setting similar devices should be done by connecting them to the network through an isolation transformer with a transformation ratio equal to unity. The voltage at its output will correspond to the network voltage, but at the same time reliable galvanic isolation will be ensured.

For those just starting to take their first steps into electronics, it is important to start somewhere. Well, we invite you to familiarize yourself with ideas that may come in handy in the future and at the same time give you an idea of ​​how something should be done. What to choose if you want to make simple ones with your own hands? Here are options that can be used in everyday life.

Simple power regulator for smooth switching of lamps

This type of device has found wide application. The simplest is a regular diode, which is connected in series with the load. Such regulation can be used to extend the life of an incandescent lamp, as well as to prevent overheating of the soldering iron. They can also be used to change power over a wide range of values. First, there will be the simplest DIY electronic crafts. You can see the diagrams here.

How to protect yourself from mains voltage fluctuations

This device turns off the load if the mains voltage is outside the permissible limits. As a rule, a deviation of up to 10% from the norm is considered normal. But due to the peculiarities of the energy supply system in our country, such limits are not always observed. So, the voltage can be 1.5 times higher, or much lower than necessary. The result is often unpleasant - the equipment fails. Therefore, there is a need for a device that will turn off the load before something has time to burn out. But when creating such a homemade product, you need to be careful, since the work will be carried out with considerable stress.

How to make a safety transformer

Transformerless power supplies are often used in various electronic designs. Typically, such devices have low power, and to avoid electrical injury, they are placed in an insulating plastic case. But sometimes they need to be configured, and then the security is broken. To avoid possible injury, use an isolating safety transformer. It will also be useful when repairing such devices. Structurally, they consist of two identical windings, each of which is designed for the network. As a rule, the power of transformers of this type ranges from 60-100 W; these are the optimal parameters for setting up various electronics.

Simple emergency lighting source

What should you do if you need to ensure that some area remains illuminated in the event of a power outage? The answer to such calls can be an emergency lamp made on the basis of a standard energy-saving lamp, the power of which does not exceed 11 Watts. So if you need light somewhere in the corridor, utility room or workplace, this homemade product will come in handy. Usually, if there is voltage, they operate directly from the mains. When it disappears, the lamp begins to function on battery power. When the mains voltage is restored, the lamp will work and the battery will automatically charge. The best electronic DIY projects have been left for the end of the article.

Boost power regulator for soldering iron

In cases where it is necessary to solder massive parts or the mains voltage often drops, using a soldering iron becomes problematic. And a step-up power regulator can help out of this situation. In these cases, the load (i.e., the soldering iron) is powered using rectified mains voltage. The change is carried out using an electrolytic capacitor, the capacitance of which allows you to obtain a voltage greater than 1.41 network voltage. So, with a standard voltage value of 220 V, it will give 310 V. And if there is a drop, say, to 160 V, then it will turn out that 160 * 1.41 = 225.6 V, which will allow for optimal operation. But this is just an example. You have the opportunity to make a scheme that is suitable specifically for your conditions.

The simplest twilight switch (photo relay)

As new parts are created, fewer components are now needed to make a device. So, for a regular twilight switch, only 3 of them are needed. Moreover, thanks to the versatility of the design, multi-purpose use is possible: in an apartment building; for lighting the porch or courtyard of a private home, or even a separate room. Pointing out the features of such a design as a twilight switch, it is also called a “photo relay”. You can find many implementation schemes that were made either by amateurs or industrialists. They have their own set of positive and negative properties. Negative properties are usually either the need for a constant voltage source or the complexity of the circuit itself. Also, when buying cheap and simple parts or entire sets, they often complain that they simply burn. The functionality of the scheme is based on three components:

1. Photocell. It is usually understood as photoresistors, phototransistors and photodiodes.
2. Comparator.
3. Triac or relay.

When there is daylight, the resistance of the photocell is low and does not exceed the response threshold. But as soon as it gets dark, the structure will be turned on at that very moment.

Conclusion

Here are some interesting electronic crafts you can make with your own hands. The main thing in cases where something doesn’t work out is to keep trying, and then everything will work out. And after gaining experience, it will be possible to move on to more complex schemes.

So. Life has turned out in such a way that I have a house in the village with gas heating. It is not possible to live there permanently. The house is used as a summer house. For a couple of winters I stupidly left the boiler on with the minimum coolant temperature.
But there are two disadvantages.
1. Gas bills are astronomical.
2. If there is a need to come to the house in the middle of winter, the temperature in the house is around 12 degrees.
Therefore, it was necessary to invent something.
I'll clarify right away. Availability of point WI-FI access Mandatory in the relay coverage area. But, I think, if you get confused, you can put a connected mobile phone next to the sensor and give out a signal from the phone.

Connecting a 4-pin motion sensor with your own hands (diagram)

DIY motion sensor connection diagram

It happens that you need to install lighting in your dacha or in your home. will be triggered by movement or a person or someone else.

A motion sensor, which I ordered from Aliexpress, works well with this function. The link to which will be below. By connecting light through a motion sensor, when a person passes through his field of vision, the light turns on and stays on for 1 minute. and turns off again.

In this article I’ll tell you how to connect such a sensor if it doesn’t have 3 contacts, but 4 like this one.

DIY power supply from an energy-saving light bulb

When to get 12 Volt for LED strip , or for some other purpose, there is an option to make such a power supply with your own hands.

DIY fan speed controller

This regulator allows for smooth adjustment variable resistor fan speed.

The circuit of the floor fan speed controller turned out to be the simplest. To fit into the case from the old charger Nokia phone. The terminals from a regular electrical outlet also fit in there.

The installation is quite tight, but this was due to the size of the case..

DIY plant lighting

DIY plant lighting

There may be a problem with lack of lighting plants, flowers or seedlings, and there is a need for artificial light for them, and this is the kind of light we can provide on LEDs with your own hands.

DIY brightness control

DIY brightness control

It all started with the fact that after I installed at home halogen lamps for lighting. When turned on, they often burned out. Sometimes even 1 light bulb a day. Therefore, I decided to make a smooth switching on of the lighting based on a brightness control with my own hands, and I am attaching a diagram of the brightness control.

DIY refrigerator thermostat

DIY refrigerator thermostat

It all started when I returned from work and opened the refrigerator to find it warm. Turning the thermostat control did not help - the cold did not appear. Therefore, I decided not to buy a new block, which is also rare, but to make it myself electronic thermostat on ATtiny85. The difference with the original thermostat is that the temperature sensor is on the shelf and not hidden in the wall. In addition, 2 LEDs have appeared - they signal that the unit is turned on or the temperature is above the upper threshold.

DIY soil moisture sensor

DIY soil moisture sensor

This device can be used for automatic watering in greenhouses, flower greenhouses, flower beds and indoor plants. Below is a diagram on which you can make a simple sensor (detector) of soil moisture (or dryness) with your own hands. When the soil dries out, voltage is applied with a current of up to 90 mA, which is quite enough, turn on the relay.

Also suitable for automatic switching on drip irrigation to avoid excess moisture.

Fluorescent lamp power supply circuit

Power supply circuit for a fluorescent lamp.

Often when energy-saving lamps fail, it burns out. power supply circuit, and not the lamp itself. As is known, LDS with burnt filaments, it is necessary to supply the network with rectified current using a starterless starting device. In this case, the filaments of the lamp are shunted with a jumper and to which the high voltage to turn on the lamp. There is an instantaneous cold ignition of the lamp, with a sharp increase in voltage across it, upon start-up without preheating the electrodes. In this article we will look at starting an LDS lamp with your own hands.

USB keyboard for tablet

USB keyboard for tablet

Somehow, suddenly, I took something and decided to buy a new keyboard for my PC. The desire for novelty is irresistible. Changed the background color from white to black, and the letter color from red-black to white. After a week, the desire for novelty naturally disappeared like water into sand ( old friend better than the new two) and the new thing was sent to the closet for storage - until better times. And now they came for her, she didn’t even imagine that it would happen so quickly. And therefore the name would be even better suited not which is, but how to connect usb keyboard to the tablet.

Since you have decided to become a self-taught electrician, then probably after a short period of time you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example. Actually the build process simple devices at home is not difficult. You just need to be able to read diagrams and use the ham radio tool.

As for the first point, before you start making electronic homemade products with your own hands, you need to learn how to read electrical circuits. In this case, ours will be a good helper.

Among the tools for novice electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances, you may even need a welding machine, but this is a rare case. By the way, in this section of the site we even described the same welding machine.

Special attention should be paid to available materials, from which every novice electrician can make basic electronic homemade products with their own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, novice radio amateurs and electricians just need to look for all the necessary tools in a garage or shed in the country.

When everything is ready - the tools have been collected, spare parts have been found and minimal knowledge has been obtained, you can proceed to assembling amateur electronic homemade products at home. This is where our small guide will help you. Each instruction provided includes not only detailed description each stage of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video lessons that clearly show the entire manufacturing process. If you don’t understand some point, you can clarify it under the entry in the comments. Our specialists will try to advise you in a timely manner!

Those who do radio electronics at home are usually very inquisitive. Amateur radio circuits and homemade products will help you find a new direction in your creativity. Perhaps someone will find an original solution to this or that problem. Some homemade products use ready-made devices, connecting them in different ways. For others, you need to completely create the circuit yourself and make the necessary adjustments.

One of the simplest homemade products. More suitable for those who are just starting to craft. If you have an old but working cell phone push-button telephone with a button to turn on the player, you can make it, for example, door bell to your room. The advantages of such a call:

First, you need to make sure that the selected phone is capable of producing a sufficiently loud melody, after which it must be completely disassembled. Basically, the parts are secured with screws or staples, which are carefully folded back. When disassembling, you will need to remember what goes with what, so that later you can put everything back together.

The player's power button is unsoldered on the board, and two short wires are soldered in its place. These wires are then glued to the board so the solder doesn't come off. The phone is going. All that remains is to connect the phone to the call button via a two-wire wire.

Homemade products for cars

Modern cars are equipped with everything you need. However, there are times when it is simply necessary homemade devices. For example, something broke, they gave it to a friend, and the like. That’s when the ability to create electronics with your own hands at home will be very useful.

The first thing you can tamper with without fear of damaging your car is the battery. If you don’t have a battery charger at hand at the right time, you can quickly assemble it yourself. To do this you will need:

A transformer from a tube TV is ideal. Therefore, those who are interested in homemade electronics never throw away electrical appliances in the hope that they will be needed someday. Unfortunately, two types of transformers were used: with one and with two coils. To charge a battery at 6 volts, any will do, but for 12 volts only two.

The wrapping paper of such a transformer shows the winding terminals, the voltage for each winding and the operating current. To power the filaments of electronic lamps, a voltage of 6.3 V with a high current is used. The transformer can be remade by removing unnecessary secondary windings, or leave everything as is. In this case, the primary and secondary windings are connected in series. Each primary is rated at 127 V, so combining them produces 220 V. The secondary are connected in series to produce an output of 12.6 V.

Diodes must withstand a current of at least 10 A. Each diode requires a radiator with an area of ​​at least 25 square centimeters. They are connected into a diode bridge. Any electrical insulating plate is suitable for fastening. A 0.5 A fuse is included in the primary circuit, and a 10 A fuse in the secondary circuit. The device does not tolerate short circuit, so when connecting the battery, do not confuse the polarity.

Simple heaters

During the cold season, it may be necessary to warm up the engine. If the car is parked where it is electricity, this problem can be solved using a heat gun. To make it you will need:

• asbestos pipe;
• nichrome wire;
• fan;
• switch.

The diameter of the asbestos pipe is selected according to the size of the fan that will be used. The performance of the heater will depend on its power. The length of the pipe is everyone's preference. You can collect in it a heating element and a fan, only a heater is possible. When choosing the latter option, you will have to think about how to allow air flow to the heating element. This can be done, for example, by placing all components in a sealed housing.

Nichrome wire is also selected according to the fan. The more powerful the latter, the larger the diameter nichrome can be used. The wire is twisted into a spiral and placed inside the pipe. For fastening, bolts are used that are inserted into pre-drilled holes in the pipe. The length of the spiral and their number are selected experimentally. It is advisable that the coil does not become red hot when the fan is running.

The choice of fan will determine what voltage needs to be supplied to the heater. When using a 220 V electric fan, you will not need to use additional source nutrition.

The entire heater is connected to the network via a cord with a plug, but it itself must have its own switch. It can be either just a toggle switch or an automatic machine. The second option is more preferable; it allows you to protect the general network. To do this, the operation current of the machine must be less than the operation current of the room machine. A switch is also needed to quickly turn off the heater in case of problems, for example, if the fan does not work. This heater has its disadvantages:

• harmful to the body from asbestos pipes;
• noise from a running fan;
• smell from dust falling on the heated coil;
• fire hazard.

Some problems can be solved by using another homemade product. Instead of an asbestos pipe, you can use a coffee can. To prevent the spiral from shorting on the jar, it is attached to a textolite frame, which is fixed with glue. A cooler is used as a fan. To power it, you will need to collect another electronic device- a small rectifier.

Homemade products bring those who do them not only satisfaction, but also benefits. With their help, you can save energy, for example, by turning off electrical appliances that you forgot to turn off. A time relay can be used for this purpose.

The simplest way to create a time-setting element is to use the charging or discharging time of a capacitor through a resistor. Such a chain is included in the base of the transistor. The circuit will require the following parts:

• high-capacity electrolytic capacitor;
• transistor p-n-p type;
• electromagnetic relay;
• diode;
• variable resistor;
• fixed resistors;
• DC source.

First you need to determine what current will be switched through the relay. If the load is very powerful, you will need a magnetic starter to connect it. The starter coil can be connected via a relay. It is important that the relay contacts can operate freely without sticking. Based on the selected relay, a transistor is selected and it is determined what current and voltage it can operate with. You can focus on KT973A.

The base of the transistor is connected through a limiting resistor to a capacitor, which, in turn, is connected through a bipolar switch. The free contact of the switch is connected through a resistor to the power supply negative. This is necessary to discharge the capacitor. The resistor acts as a current limiter.

The capacitor itself is connected to the positive bus of the power source through a variable resistor with high resistance. By selecting the capacitance of the capacitor and the resistance of the resistor, you can change the delay time interval. The relay coil is shunted by a diode, which turns on in the opposite direction. This circuit uses KD 105 B. It closes the circuit when the relay is de-energized, protecting the transistor from breakdown.

The scheme works as follows. IN original condition The base of the transistor is disconnected from the capacitor and the transistor is turned off. When the switch is turned on, the base is connected to the discharged capacitor, the transistor opens and supplies voltage to the relay. The relay operates, closes its contacts and supplies voltage to the load.

The capacitor begins to charge through a resistor connected to the positive terminal of the power source. As the capacitor charges, the base voltage begins to rise. At a certain voltage value, the transistor closes, de-energizing the relay. The relay switches off the load. In order for the circuit to work again, you need to discharge the capacitor; to do this, switch the switch.