Iphone 6 screen won't turn on. What to do if your iPhone won't turn on? In the event of a malfunction with the charge controller, you need to completely disassemble the device. You should not do this if you do not have experience in repairing such devices. In the worst case you can

13.03.2020

Reading time: 2 min

Recently, Apple devices have been gaining more and more popularity. original design, high-quality spare parts, and support for many applications do not leave users indifferent. But any device can fail, no matter if it’s Apple or some other brand. If you are faced with such a problem and don’t know what to do if your iPhone 6 turns off and won’t turn on or charge, then this article is just for you.

Causes of malfunction

The iPhone manufacturer cares about the quality of the devices and factory defects can be discarded, but there is a chance and it is scanty. iPhone quality has been proven over the years. Many problems arise due to careless handling of the device. Or in an attempt to reconfigure the system yourself.

The most common reasons why the iPhone 6 turns off and won’t turn on are:

The charging socket is damaged or dirty
The USB cable is not working or the power socket itself is faulty
faulty loop contacts
using non-original Chinese cable
firmware glitch
problems with internal components, motherboard, battery, charge controller.

In the event of a malfunction with the charge controller, you need to completely disassemble the device. You should not do this if you do not have experience in repairing such devices. In the worst case, you can break the phone, which will not come back to life at all, or the repair will be much more expensive. It's better to contact specialists.

Solution

Many people try to fix this problem on their own and begin to open the device themselves and try to find something there and make a diagnosis. Having no experience and no idea, they only make things worse. Do not do this. It is better to try methods that will not harm the device, and only then it is better to take it to a service center.

Many users, as well as service centers, recommend starting with the simplest thing, which is rebooting the device. Even if you have it won't turn on and shows no signs of life, it's worth a try. To do this, press the Power and Home buttons with two fingers, then wait 10-15 seconds.

If you see an apple on the screen, then everything is fine and the phone will turn on without any intervention from service centers.

If the phone still does not turn on, then it may be software glitch makes itself felt. To check this version and make sure that this is the reason, you should:

connect the gadget to the computer’s USB cable;
wait for synchronization;
go to the iTunes program;
Click on the “Restore” button and select the latest backup.

After all operations, the data recovery process will start, and the iPhone should reboot and return to working condition.

Solving the problem with the charger

According to some observations, most owners Apple devices save on accessories and buy Chinese products to save money. But this was to be expected, because the original charger costs on average $20, which is quite a lot, and the Chinese one costs only $5.

The way out of this problem is simple. Buy an original charger or borrow it from someone to check that the problem is in the charger. This is the most common problem. It's worth checking the cable and the socket itself before you start picking at the phone with a screwdriver.

Changing components and modules

If none of the methods help, it’s time to contact a service center, where specialists will conduct a full diagnosis of the device and tell you what exactly is faulty.

If the battery or controller fails, you need complete disassembly phone for replacement. Specialists disassemble the device using special tools. There is no need to try to disassemble the phone using improvised means. You can completely kill the Apple.

Also, the reason for not turning on may be damage motherboard, which can also only be replaced by professionals.

If you are the proud owner of an Apple gadget, iPhone 6, then you are probably already accustomed to its stable and reliable operation, and the fact that it turns off and does not turn on leads to a dead end.

If your iPhone 6 or iPhone 6 Plus won't turn on or respond when you touch it, or freezes when you turn it on, find out what to do below.

If the screen goes blank or frozen, you may need to restart your device. Rebooting the system does not delete the contents of the device.

You can force it to reboot even if the screen is black or even if the buttons are unresponsive.

iPhone 6 won't turn on - turn it on with the program

If your iPhone 6 does not turn on, you can turn it on using an excellent proven program -

In addition, it will fix errors with iOS that lead to problems - of course, if the phone fell into water or onto the floor, or something burned, then the program will not help.

For every problem that arises in iOS, we immediately provide ready-made solutions, and it’s impossible to get confused in the interface.

If your iPhone 6 still won't turn on or start

Connect Charger. After a few minutes, the charging screen will appear. Make sure everything is secure and free of dirt and damage.

Typically, the charging screen should appear after a few minutes. In most cases, the problem can be easily fixed if a failure occurs software causing this problem, or the battery is completely dead.

Other reasons that can cause the problem are firmware corruption or hardware problems.

Don't panic and look for a screwdriver. In general, I strongly advise you not to disassemble your smartphone, so as not to make it even worse.

Your problem in ninety-nine percent of cases can be quickly resolved without a screwdriver - below I will show you what actions you should take.

In this case, let the device cool down, insert it into the charger, and wait a while before trying to turn it on.

After the device is charged, the charging screen appears after a while.

Another reason is that the cable connector is worn out. This could be a problem. If the charging port is damaged, your device may need servicing.

If nothing happens and your device is charging your phone, there are a few things you can try, namely doing a reset.

How to reset iPhone 6 if it won't turn on

Resetting does not delete data on your device and does not affect its functionality in any way. It can be done wherever you are, whether you are in front of the computer or on the road, in the car, on the train, it doesn't matter.

When your iPhone 6 won't turn on, first check to see if the operating system responds to pressing the sleep/wake button.

If you hold it down for a few seconds, a slide will appear on the screen to turn off your iPhone 6/plus.

Drag it to the right and the device will turn off. Then hold the same button again until the Apple logo appears on the screen.

After a few seconds, the operating system will boot and you will be able to use the device.

If the first method does not work and none of the buttons are responding, then you need to reset it using the method below.

The process involves pressing the sleep/wake + home buttons simultaneously for a few seconds until the Apple logo appears on the screen.

Please note that this method does not delete data from your smartphone either, so keep your peace of mind from that point of view.

Additionally, such a reset is not the same as entering Restore or DFU mode. It's just a forced restart.

iPhone 6 won't turn on - restore it

If the previous method did not help, and the iPhone 6 / iPhone 6 Plus still does not turn on, use a more radical method, namely restoring the operating system iOS systems With using iTunes. It's very simple.

Connect your iPhone 6 to your computer using a USB cable.
iTunes must be installed on the computer you connect the device to.
Open iTunes and then press CTRL + S and select your device from the menu.
Go to the “Browse” tab and hold down the buttons on the device: home + on / off. Do not release the buttons for about ten seconds;
Then a window will appear in iTunes in which you will be asked to restore the iOS operating system.

Why doesn't my iPhone 6 turn on yet?

Apple smartphones have long been known as fairly reliable devices. Yes, and the iOS operating system does not provide much reason for criticism.

Sometimes, there are still problems - electronics, no matter what you say, are a piece of capricious elements. One of the common phenomena is that the iPhone 6 does not turn on, but the apple on the screen is lit.

Then turning it on in the usual way does not work. Probable Causes The occurrence of this problem is quite large.

Unfortunately, due to the fact that the apple on the screen is lit and the phone does not turn on, very often the problem occurs with the equipment.

- Power button malfunction, although it is not so weak, it can still be broken.

— The charging controller has failed. Like the previous error, these are power problems.

— The battery died. This problem occurs if the battery is damaged (maybe due to improper handling - charging and discharging).

— The flash memory has run out. Then you will need to replace it.

- Problems with motherboard. In this case, the phone itself may sometimes even boot up and even work for a moment.

However, the apple will burn on the screen more and more often until it stops working altogether.

Unfortunately, these problems with my own hands For repairs, only those who are comfortable with soldering and a multimeter are able to do it; other users have to carry the phone to a service point for repairs. Good luck.

iPhone 6, 6s suddenly stopped turning on? Try to remember possible reason breakdowns. Maybe you recently changed your charger, but it doesn't work and your phone is simply dead. In addition to replacing the cable, there are other reasons why the gadget does not turn on:

internal mechanical damage due to a fall or impact on a hard surface;
moisture getting inside the device;
phone overheating;
temperature conditions (the iPhone often turns off in the cold because it quickly loses battery power);
firmware failure.

It is important to know. If there was a strong impact, the processor could be damaged. In such a situation, you will have to change the entire board.

There are times when the iPhone did not want to charge from the car charger and simply ran out of charge.

Solving the problem yourself

The breakdown may not be as serious as it seems, and you will be able to “reanimate” the device without outside help. If iPhone 6, 6s, plus does not turn on, follow the instructions:

Perform a full reboot of the gadget (press and hold the “Home” button and the power button simultaneously for 20 seconds);
Bring your phone into a warm place if it turns off in the cold, and wait until it “warms up”;
Change the charger (it is advisable to use only the original cable from Apple);

Some “craftsmen” advise turning off the battery for a short time. To do this, the iPhone needs to be partially disassembled. Do not use this advice under any circumstances. You can damage small parts, which will be expensive to repair.

It is important to know! If your iPhone falls into water, you should never dry the parts with a hairdryer or place them in the sun. Everything should dry naturally. If you know how, you can disassemble the phone, but it is better to contact qualified specialists.

Help from experienced specialists

Couldn't you bring your iPhone back to life on your own? Contact our service center(SC). You can get a free preliminary consultation by phone so as not to waste time on the road.

If it is not possible to solve the problem with the device remotely, the technician at the service center will conduct a full diagnosis and suggest the cause of the problem. Subsequently, he will replace the faulty part with a new one and give recommendations.

Our specialists will repair iPhone 6, 6s in St. Petersburg according to favorable price right before your eyes. All service center (SC) services are guaranteed.

Call right now and today your iPhone will get a “second life”.

Like all technology, Apple devices do not last forever and can break down over time. One of the most common breakdowns is when the iPhone turns off and won’t turn on. The reasons for this can be very different, and depending on what caused the problem, one or another method of solving it is used.

Today's article will be devoted to this kind of problems with Apple gadgets. After reading it to the end, you will learn how to deal with any kind of breakdown of your smartphone, and what to do if the iPhone 4 does not turn on, the iPhone 5S does not turn on, or any other phone model.

However, we note that if your iPhone does not turn on and it has been seriously damaged - for example, after falling from the fifth floor or it was in water for a long time, then the methods described below for restoring the device's operation are unlikely to be useful. In such situations, it is better not to hesitate and immediately contact the service center. Well, for those users whose iPhone does not turn on, and this happened suddenly and without visible reasons, our recommendations should help.

Note also that if a mobile device stops turning on for no apparent reason, most likely it was influenced from the outside. Because smartphones usually don’t break down just like that. Especially when it comes to Apple devices.

The most common breakdown situations of Apple smartphones are given below, as well as options for fixing them.

A very common problem in which the iPhone 4S display does not turn on, but remains black for a long time, and it itself does not turn on, no matter what actions the user takes. Moreover, this can happen not only with the outdated “four”. Often the iPhone 5S does not turn on either, which is indicated by the appearance of a black screen.

As a rule, "to blame" similar situations a completely discharged battery that needs to be charged for a while and then tried to be turned on. The phone is just dead and won't turn on. But perhaps the problem is that the operating system is freezing. Very rarely, in 2-3% of cases, the problem is a crashed firmware, but the solution to the problem in this case will be slightly different than in the first two mentioned above.

So, if the iPhone, or rather its screen, is black, and the phone does not turn on even after charging, you can try the following steps:

1 If the owner of the gadget kept the device in the cold for a long time, it is quite possible that this is the cause of the malfunction. Mobile device batteries do not tolerate low temperatures well, and in such conditions they can very quickly discharge or freeze. What to do in this case? Try to warm the device in your palms. If this doesn't help, try step two. 2 You just need to connect the device to the charger. Maybe the device is 100% discharged, and this is the reason why the gadget refuses to turn on. If after 10-15 minutes of charging the device does not respond to turning on, then this is not the problem. Then we try the third method. 3 It is necessary to simultaneously press the home and power buttons (on the seventh version of the iPhone - power and volume). Wait 20 minutes until a glowing image of an apple appears on the display, then release the buttons. The operating system should boot. 4 You can try turning the silent switch on and off several times, sometimes this helps, although there is no reasonable explanation for this. This procedure must be done before performing the second step. It sometimes gives a positive effect if pressing buttons does not help.

If the above actions did not give any result, then the problem is very serious. For example, there may be a breakdown of internal elements, a failure of the charger, or something else. You can try to take another charger (for example, from a relative or colleague) and connect the gadget to it. If the situation does not improve and the phone will not charge and the display remains black, you need to take the device to a repair shop.

The possibility of a charging fault should not be ignored. As user experience shows, it is this component that most often fails and can even burn. After several months of use, especially if handled carelessly, the cord may become damaged in some place and current will not pass through it.

Attention! Use only original chargers that come with your iPhone. Chinese fakes heat up quickly and often melt during charging. A burning cord made in China is not such a rare occurrence.

Dead iPhone refuses to turn on

There may be several reasons for this problem:

1 The Lightning port is dirty. It's no secret that the majority of the population carries smartphones in the back pocket of their trousers, and also does not place the fragile device in protective covers. Of course, with such careless operation, a lot of fine dust. How to fix this problem? The solution is simple - clean the gadget from dust, for example, using a toothpick. When cleaning, it is recommended to reach every corner of the Lightning connector. But you need to work very carefully so as not to damage the fragile part. 2 USB - the port is faulty. When I charge the gadget, the first thing I need to do is check if the cable is working properly. The connectors may be faulty. It is not known why this is happening, but the smartphone does not receive charge through some connectors. 3 If this is the case, try using a different cable. You can also try connecting to another 220 volt outlet. 4 Problems with the charging device or cable. The fact is that many users, saving money, purchase Chinese chargers. They often break down and quickly cease to perform their functions. Therefore, we remind you once again that it is better to use original components. Chinese fake can cause irreparable harm to your device, causing breakdowns. But if you decide to buy a fake charger, and if it doesn’t work the first time you connect it, that is, the phone doesn’t charge, stop using it immediately.

What to do if your iPhone is frozen?

Usually the Apple phone gets stuck in the app. Or it doesn’t freeze, but stops working normally. In such a situation, you need to force close it and reboot the device. To do this, you need to click on the Home button and swipe up to remove unnecessary applications.

When an Apple gadget does not respond to button presses

Users note that the situation when the device stops responding to button presses is quite common. In this case, the display displays the last screen of the application that was used before the device froze. This will require a hard reboot of the system. How to do it was said earlier (by pressing the Power and Home buttons).

If the iPhone does not turn on and the apple is on fire, what should I do?

If your iPhone turns off and won’t turn on, what should you do? This is a question that puzzled users often ask themselves. Sometimes it happens that iPhone device 4 does not turn on, but at the same time the image of the Apple logo - an apple - lights up and fades out on the display. This means that the device is stuck on the apple. By the way, it often happens that when such signs appear, the iPhone 5 does not turn on, the iPhone 5C does not turn on, and other models of Apple devices refuse to work.

If the iPhone goes out and then the apple lights up, then the reason for this is one of 3:

Unsuccessful process of updating the iOS operating system on iPhone 5S, iPhone 6S, iPhone 7, iPhone 6 PLUS, iPhone 3GS and other phones.
Clumsy jailbreak.
Failure when restoring the system from a backup (one of the most common reasons why an iPhone won’t turn on).

In such a situation, the user may think that the device is hopelessly broken. But this is not always the case. You can try to fix everything.

In most cases, if it does not turn on mobile device, the problem is solved by a system recovery procedure, for which you need to take the following steps:

On a PC or laptop, open the iTunes utility. Connect to computer USB cable, but don’t connect your smartphone yet.
Turn off the phone by holding Home buttons and Power.
Press the Home button to connect the cable to the phone.
Do not release the pressure until the iTunes logo and plug appear on the screen.
The computer will display a message indicating that the device is in recovery state.
And now you just need to click on the restore button, then the computer will do everything itself, namely, download the latest version of iOS from Apple’s servers, and then install it on the iPhone.

Please note that to carry out the above procedure, you need to have a high-speed Wi-Fi connection.

Using DFU mode to turn on iPhone

What to do if iPhone 5 and other newer versions of the device do not turn on - iPhone 6 does not turn on, iPhone 7, iPhone 6S suddenly turns off, but does not turn on. In this case, the display may suddenly light up and then go out, i.e. the device will respond several times to the user touching the power button, and then it will turn off “forever”.

If, after applying all the methods described above, your device does not turn on, you can only use the last method - DFU modes. This is a special operating mode of the phone in which the firmware is updated.

This mode is used in the following cases:

The device refuses to charge when the iPhone 6S does not respond to the flow of current through the charger. In such situations, the device can only completely discharge and turn off. To the user's reverse actions, i.e. attempts to turn on. It doesn't react at all.
The iPhone does not turn on despite any user actions (iPhone 6S, iPhone 3GS, etc.).
It is not possible to restore the system using other methods.

In order for your iPhone to enter this mode, you need to do the following steps:

Connect the gadget to your PC or laptop via a cable, plus launch the iTunes utility.
Within 10 seconds, simultaneously press the Home and Power buttons.
Continue pressing the 1st button until the message Recovery Mode appears on the screen.

If everything went well, no special messages should appear indicating that the device has entered this mode. Next, you need to restore the firmware, for which you need to click on the corresponding button so that the updates begin to download. The system itself will do everything in 10 - 15 seconds, and after that the smartphone will reboot and start turning on and working in normal mode. In this case, the screen will not be turned on, but will turn off for a while, i.e. The display will have time to go dark during this time.

If none of the methods turn on iPhone did not help you, and after applying all possible ways iPhone 6S or any other phone model does not turn on, contact a service center. Specialists will carry out diagnostics and identify the true cause of this malfunction. In this case, the culprit is obviously not the device’s discharge or its shutdown for no apparent reason, but more serious faults in the “stuffing”.

Everyone may face a situation where iPhone is charging, but it doesn’t work. Perhaps the reason for the breakdown is serious, and you will have to repair the phone at a cost. But in a number of different cases (for example, if the connector is dirty or a software failure has occurred), you can fix the problem at home without experience, qualifications or tools. But not many people know how to connect a phone to a TV, and in this article we will look at 6 ways to display an image from a phone to a TV. It’s worth trying to find the problem on your own and get your phone working again.

What are the causes of iPhone malfunctions?

Many iPhone owners experience difficulties: the device charges slowly or does not turn on at all. And if a small problem (for example, a broken Home button) is not so critical, then in such situations it is impossible to use the phone.

Main reasons for the malfunction:

important internal parts are damaged (tristar controller, synchronization cable, power controller, motherboard or battery) due to mechanical impacts (impacts, falls) or liquid spillage
a faulty, non-original charger is used (available Chinese counterfeit)
failure of the Lighting connector or its contamination caused by dust, hair, lint and other small debris
software failures (software directly affects the chip that controls the charging process)
The USB port of your tablet or desktop computer is broken
factory defects of Apple devices involved in the battery charging process

Errors during program operation, breakdowns of chargers and iPhone parts (batteries, connectors, cables, etc.) can manifest themselves in different ways. A few examples:

iPhone won't turn on after being discharged (when the battery runs low)
the application hangs, does not respond to presses, or the screen is one hundred percent dark
The device turns on, but hangs after the Apple logo appears
the indicator lights up, but the charge level is very low even over a long period of time
The iPhone is dead and won’t turn on when charging from the cigarette lighter or computer

Before taking your phone to a service center, make sure that the cause of the malfunction is a hardware failure. And under no circumstances do not delay your trip or call a repairman if you have spilled iPhone water - every hour of delay can worsen the situation.

How to get your iPhone back working

When faced with power-on and charging dilemmas, first check to see if there is current in the outlets. What to do if the iPhone does not turn on but the apple is on fire. Next, if the phone does not turn on at all, connect it to the charger. IN normal condition The device immediately writes that it is charging - the indicator lights up, which means the process is in progress. Please remember that the battery is not designed to operate in low temperatures. Therefore, warm up the phone before connecting the charger if the battery runs out in the cold.

Another situation is when you are trying to start an iPhone that has been discharged for a long time. If the battery runs low, you need to wait 15-60 minutes and only then press the Home or Power button.

IPHONE 5 CHARGES BUT WILL NOT TURN ON (SOLVING THE PROBLEM)

Indicator shows charging but not charges Subscribe to the channel, like it :) Bought it.

How to turn on Iphone 5, 5s, 5c if it is charging but not turns on(one of the methods)

For anyone who would like to give back in kind, here is the link:

Where to go for iPhone repairs

When iPhone charges, but does not turn on, the most best option– based on price, timing and quality – ordering services on Yuda. One of the main advantages of the service is mandatory verification. All performers undergo a special check and confirm the accuracy of the data. Their profiles contain the following information.