Starting a washing machine for the first time: tips and tricks. How to use the Indesit washing machine How to turn on quick wash for Indesit
Many people do not pay attention to the operating instructions when purchasing washing machines. It seems that everything is simple: turn on the equipment and use it. However, this issue needs to be taken more seriously. The operating instructions will answer any user question, because the information in it is presented simply and clearly.
Users of Indesit washing equipment, as a rule, have difficulties with the control panel, since it is quite complex. In this article we will figure out how to use washing machine Indesit.
Starting the wash
First, let's figure out how to use . It should be noted that operating washing equipment of this brand is quite simple. However, it is better to study first. It contains the following items:
- Open the hatch of the machine and put in the laundry.In this case, the amount of laundry should not exceed the maximum permissible drum load.
- Make sure that the washing equipment is connected to the mains.Then you need to press the power button.
- Select the required washing mode, setting the program selector to the required position.
- Adjust the washing temperature.This is done using the temperature selection toggle switch.
- Change wash programat your discretion using the buttons described below.
- Press the “start” button.After this, the washing process will begin. You can also choose to simply spin or rinse and spin separately.
Some models of Indesit washing equipment do not contain a “start” button. In this case, to turn it on, you must first select a washing program. Then select the desired washing temperature and press the on/off button.
Indesit brand washing equipment does not contain unnecessary electronics. She has both voice and remote control. It is also equipped touch panels and color displays. Washing machines of this brand may seem old-fashioned to people who love modern gadgets. But at the same time, the absence of unnecessary electronics makes such equipment cheaper, and therefore more attractive to buyers.
It is important to note that the lack of the latest electronics does not in any way affect the quality of the wash. On the contrary, the control module of the washing machine is more reliable because it is simpler in design.
However, it is not only technology that affects the quality of washing.
It is also important for the user to learn how to properly start and configure an Indesit washing machine. In other words, to get a good result, you need to learn how to use the Indesit washing machine.
- The laundry placed in the machine drum must be sorted. This should be done based on the type of fabric, color of the linen, color fastness, as well as the presence of weakly fixed elements on the linen.
- Before washing new items, you should check their labels. The manufacturer usually indicates on the label whether the item can be washed.
- It is important to check all pockets before placing clothes in the drum. Any small object that gets into an Indesit washing machine can cause serious problems. No less problems can arise if you accidentally wash an important document (passport, credit card, etc.). Therefore, it is better to immediately acquire this useful habit.
- Check that buttons are securely fastened to clothing before washing. It is also necessary to fasten zippers on clothes. And if clothes contain plastic zippers, then it is better to wash them in a specialized bag.
- It is advisable to turn clothes inside out before washing. Then it will wash off better.
- Don't wash too many things at once big size, this will worsen the balancing of the machine drum. It is better to mix small and large items and wash in several batches.
- Large items should not be washed one at a time. The result will be much higher if you put several small ones in the drum along with a large item.
- You should not use powders used for hand washing, because in this case too much foam is formed.
- Each detergent must be placed in the appropriate tray. Each product has its own powder receptacle compartment.
- If the laundry will be washed without heating the water, then you need to use half the amount of powder. After all, it will not dissolve completely in cold water and will be removed after washing with dirty water.
- The washing program can be selected only after stopping the Indesit washing equipment. Failure to comply with this control module rule.
Most popular programs
Indesit washing machines have many modes. Some modes are used much more often than others.
Users of Indesit washing equipment most often use the following programs:
- Mixed things (the program is indicated by number 3 on the selector);
- Wool (indicated by the number 14);
- Moderately soiled non-fading synthetics (indicated by the number 9 on the selector);
- Heavily soiled white items (number 1)
- .Colored things (number 4);
To wash heavily soiled white items, select washing mode 1. This is done using the program selector. Use the temperature selection toggle switch to select MAX or 900C. If you don’t need to boil the laundry, you can set it to 600C. There is no need to choose a lower temperature.
The number 3 on the toggle switch indicates the “mixed things” program. This program is the most universal and is used most often than others. It is chosen when washing faded colored items or white, non-fading colored laundry. In the first case, the temperature is set to 400C, and in the second – 50-600C.
The number 4 indicates the “colored things” mode. This mode is necessary for washing lightly and moderately soiled items. The water temperature is 400C. However, this mode can be used to wash not only colored but also white items.
For synthetic items it is better to use the mode number 9, and for woolen items – number 14.
You should be careful when washing woolen items. Such an item can only be washed if permitted by its manufacturer. In other words, if the label of a wool item contains a symbol prohibiting machine washing, then it cannot be washed in a machine.
Buttons and selectors
First, let's look at the main elements located on the control panel.
The following elements are available on any model of Indesit washing equipment:
- Program switch selector.It is the most important element of the control panel. It allows you to select the desired washing mode by turning the knob.
- Temperature selector.The control module independently sets the water temperature after selecting the washing mode. They also set the rotation speed of the drum. However, these values can be changed using the temperature selector.
- Speed regulator.Allows you to change the rotation speed of the washing machine drum.
- On/off button.It is available on all Indesit brand washing equipment. Required to activate and deactivate the machine.
It should be noted that next to the on/off button there is led indicator. It is he who notifies you when the washing machine is turned on.
Indesit machines may have the following additional ones:
This button is used when you need to wash a small amount of laundry. It saves energy and water. This button is completely similar to the previous one and performs the same functions.
The first launch of a new washing machine is a responsible event. If you connect the washing machine incorrectly, the equipment may break.
We will tell you about the first launch and help make the first start simple and comfortable.
Operating instructions: what is important to know
The first thing after purchasing a washing machine is to read the instructions for it, and not immediately try to start it up.
Often the instructions describe the process of installing and starting the washing machine for the first time. Be sure to read the manual in its entirety, taking into account all footnotes - they may contain the most important points.
If you want your washing machine to consume less electricity, follow our tips:
- It is forbidden to overload the machine more than allowed in the instructions.
- Do not wash items that are not machine washable.
- Make sure that there are no metal products in the machine - they can damage clothes and the drum.
To ensure that using your washing machine for the first time does not become troublesome, we recommend that you not only read, but also follow these steps:
- On the back side of the machine there are shipping bolts designed to secure the washing machine tank during transportation. If the bolts are not twisted, then the machine cannot be used. First, you will need to unscrew the fasteners and insert plastic plugs into the remaining holes (supplied with the machine).
- It will be very useful to know what the hardness of your tap water is. This way you can clearly understand which washing powder to use for the first start and in what quantity so that the laundry does not remain dirty after washing.
- The equipment must be connected to water supply and sewerage. If you don't want to call a specialist, do it yourself.
- Check the inlet hose valve. If it is closed, open it so that water begins to flow into the machine.
If you have a question about whether it is possible to turn on the washing machine without laundry, the answer is yes. The opinion of experts is that the first wash in a washing machine should be “idle”.
Machines are often subjected to various tests, so there may be residual dirt and oil left in the drum. To prevent them from getting on your things, you need to initially run the machine empty - this will allow you to clean all the internal parts.
The effectiveness and progressiveness of the first launch depends on how correctly the stages described above are completed. If you miss an important detail, you will not only fail to trigger the SMA, but you will also cause harm to it.
After you have checked that the machine is connected correctly and have run the drum idle, it’s time to move on to the next step - select a washing program.
Modern models of machines differ not only in the number of programs, but also in their purpose. Among the more popular features of the machines is the quick wash program and additional functions, for example, a disinfection mode.
When choosing a washing mode, take into account temperature indicators that affect the quality of washing. An incorrectly selected temperature can ruin the item. You will find in the instructions what functions and modes your washing machine provides.
Each model has different controls. For example, more budget machines are equipped with an adjustment wheel for selecting a mode. Expensive models allow you to set the mode by controlling the touch panel.
After preparation for work is completed, you will need to figure out how to start the washing machine. There should be a “Start” button on the control panel - after pressing it, the machine will start washing.
First wash: important points
Experimental washing is an opportunity to check the machine for leaks. This way you can finally make sure that the equipment is correctly connected to the water supply and sewerage system.
If a leak is detected, the machine must be stopped immediately. Forcefully drain the water, and then be sure to seek help from a specialist. Only after all problems have been eliminated can the machine be used again.
If everything is in order and the test wash went well, you can start washing your clothes. Do not forget to use the instructions and follow all the recommendations indicated in it. You will find information about the maximum load of laundry and how much detergent pour into the tray.
In order not to harm things and the machine, you need to know everything important nuances, and set the correct parameters.
After loading the laundry and selecting the washing mode, make sure that the door is tightly closed. Now start the washer by pressing the “Start” button.
Important! Make sure the machine is not leaking. If this is not done, the equipment will fail and will be unusable.
- When you start the machine for the first time and notice that it rumbles, rattles and makes strange sounds, do not do anything yourself. You are entitled free repair technicians at the service center using a warranty card. In such a situation, call service and explain the problem. A technician will come to you and fix your equipment or take it for repairs.
- Wipe the washing machine body regularly. Use products that do not contain chlorine.
- Do not forget to remove moisture and remaining dirt after washing under the rubber seal.
- Use special products for machine washing. Do not use hand washing powders. This threatens not only with the dirt not being washed off, but also with the machine breaking down.
- , since this causes parts to wear out quickly due to drum imbalance.
- Try to clean the drain filter of various small blockages as often as possible.
- Before loading items into the drum, be sure to check the pockets for foreign objects.
- After finishing washing, do not close the door - the machine must be ventilated. If ventilation is not done, this will lead to the formation of mold, fungal infections and the appearance of an unpleasant pungent odor.
- Carry out prevention. To remove scale from heating element recommended to use.
These simple rules will help you cope with any difficulties. Proper operation and regular maintenance of the SM is a guarantee of stable, proper and high-quality operation. Things will be clean and fresh, and the machine will last a long time.
Many people who have purchased a new washing machine are not aware of how to use it so as not to damage it. If you don’t know how to turn on the washing machine, then first read the instructions that came with your “home assistant”. In case if Appliances not new, you just haven’t had to wash it yourself yet, check out the following tips.
In order to turn on a modern washing machine and prepare it for work, you will need to perform a series of sequential steps. These manipulations do not cause any particular difficulties and take little time. You should start by loading the machine with laundry for the first wash.
Here it is very important to pay attention to the fact that the maximum load of laundry on a special drum in each machine is strictly limited. Therefore, you will need to refer to the instructions for use and, based on the restrictions specified therein, load the drum.
When you have loaded the recommended amount of laundry inside, you need to close the hatch tightly. If your machine has a horizontal load, then the door closes tightly until it clicks. And if household appliances have a vertical loading method, then you will first need to close the special drum of the device, and then securely slam the lid itself.
It is necessary to pay special attention to the fact that modern washing machines come with instructions, from which you can always find out how to turn on the washing machine and what features of its operation you should pay attention to. Now there are a wide variety of models of washing machines, and each of them has its own individual characteristics when turned on and subsequent operation.
Sequence of operations to be performed
As mentioned earlier, in order to put your washing machine into operation, you need to follow a certain algorithm of actions. It will help the device work long and efficiently. Modern washing machines have relatively simple and intuitive controls, which allows you to quickly start the washing process. Sequence of actions to be performed:
- Load laundry in the recommended amount.
- Place detergents in special compartments.
- Select washing mode.
- Start the process.
When you have finished loading the machine with laundry, you need to pour powder into the special compartments. You will need as much as indicated on the package. A strong excess of washing powder can lead to intense foam formation, which will adversely affect both equipment and things.
It is recommended that you take the choice of powder for your washing machine very seriously and responsibly so that washing is as safe and effective as possible.
Setting the washing program
When everything is ready to start, you will need to select the appropriate washing program. IN various models Modern machines use different modes, but the principle of their operation and the functions performed are similar.
The program must be selected in direct proportion to what kind of laundry you plan to wash and how dirty it is.
If, say, these are woolen products, then you should choose special program for washing wool items. When you wash items made of cotton, it is recommended to use one of the modes for this material. For silk items and other delicate fabrics, use the “Delicate Wash”.
Interestingly, some washing machine models require manual installation not only the washing mode, but also the water temperature.
When you put the machine into operation, you will need to decide in what mode you will wash your things. Using the intensive washing mode makes it possible to wash the dirtiest items, but this mode consumes a significant amount of electricity and water. Experts do not recommend using this washing option too often, because the equipment then works at maximum load, which can have a negative impact on its service life.
I would like to draw your attention to the fact that if you incorrectly connect your washing machine to the same water supply or sewerage system, then the washing machine may well work with glitches. When you bought an SMA and brought it home, there should be a manual in the box, it’s not just a piece of paper or a beautiful magazine, it depends on this thing correct operation washing machine. For your information, when using this technique, there are many nuances that simply cannot be ignored. People often come to my workshop who haven’t even bothered to open and even read the contents of this book, but are already running to repair their newly purchased equipment. The main mistake is the incorrect connection of the drain hose, I’ll get into this a little later and in more detail, but now I’ll tell you one incident that happened just the other day. We will talk about connecting the washing machine to electricity. In general, they brought an Indesit washing machine to my workshop, I don’t remember what model, in principle it doesn’t matter, what’s important is that I have it, it worked like a clock, but as soon as the client took it home, it stopped working. At my request, the owner of the machine measured the voltage, it turned out to be 230 volts and everything seemed to be fine, but the machine did not work. In view of the scandalous situation, I went to the place myself, the first thing I saw was that the SM was connected through a carrier, when I began to explain to the clients that this could not be done, they began to look at me, their eyes bulging. Here I would like to clarify that the heating element on a washing machine consumes about 2 kW, plus the machine itself another 0.5 kW, and the carrier is designed for 1 kW. In general, I turned on the car, waited for the heating element to start working and picked up the carrying wire, it turned out to be so hot that it was very difficult to hold it in my hands, the owners were shocked by this trick, but the tricks didn’t end there. In addition, I took a multimeter and measured the voltage while the washing machine was running and the heating element was heating the water, that is, at maximum load. There was 170 volts in the carrier. The end of the story was this: they called an electrician, he laid a direct wire to the place where the SMA is located, and also had to unseal the meter, since before it the electricity flowed normally, but after it there was a huge loss. The whole problem arose due to the fact that the wires entering the meter were aluminum and it simply oxidized. The moral of the story is this: before you run to the workshop, you need to thoroughly check the electrical network in your home.
How to connect an Indesit washing machine to the sewer
It doesn’t matter what kind of load you have on your SMA, whether it’s vertical or horizontal, it connects the same way. Another important thing here is that the Indesit washing machine has one feature that the average user doesn’t even know about, but the craftsmen know and are silent. We are talking about the troubleshooting mode, it consists in the fact that before starting the wash, the SM checks the main components, that is, turns on the valve for a few seconds, then turns on the pump for the same period of time and only after turning off the pump, after about 7 seconds. 10 begins to fill in water, starting the wash cycle. Now let's see what happens when you press the start button, that is, launch the program. The water fill valve turns on for a few seconds, that is, the washing machine is filled with approximately 3-4 liters, it depends on the pressure. After the water has been poured into the tank, the pump turns on, it does not work for long, about 4-5 seconds, but during this period of time it begins to throw water into the sewer and this is where miracles begin, or rather a siphon appears, thanks to which, after When the drain pump is turned off, water continues to flow into the sewer pipe. Then the brains give a signal to start washing, that is, the valve opens and water begins to pour in, and this happens despite the fact that the water that remained after the diagnosis has not yet been drained from the tank. The result is self-draining. Each instruction manual states that the water drain hose must be raised by 70-80 cm. On my own behalf, I can add that I usually adhere to something else; when I install a washing machine for someone, I do this. I measure 5 cm down from the top cover of the washing machine and hang the drain hose to that height, I clearly indicated this in the photo
Watch the video. Why does the Indesit washing machine constantly drain water?
How to level a washing machine
Everything is simple here, any modern SMA has adjustable legs. It is better to level the machine with a slight tilt back, this is necessary so that water does not flow from under the powder container, in addition, it seems to me that the washing machine is much more stable in this position. I would also like to comment on one question that I am often asked on my youtube channel and in the workshop
We bought an Indesit washing machine and were happy with it until the first spin. The fact is that when the washing machine started spinning, at first it shook a little, after which the vibration began to intensify, as a result it began to jump all over the bathroom, we urgently had to turn it off. When they called service center, we were simply sent and told to read the instruction manual, which basically says nothing
Now let's see where the washing machine is, as I understand it, we are talking about the bathroom and there are probably tiles in it, this is the reason that the washing machine started jumping. First of all, in this case, you need to go to the store and buy a rubber mat, and don’t tell me here that washing machines have legs made of rubber, no matter what they are made of, but by placing a rubber mat, you will not only get rid of the fact that SM walks where she wants, and also from excessive vibration. Believe me, this helps in the vast majority of cases.
Which washing mode to choose on the Indesit washing machine
On the powder container, all washing modes are indicated, usually the temperature that is recommended for a particular wash is also written there. Here we must take into account that in Indesit, in some modes, there is such a function as stopping with water. Now I will dwell on this miracle in more detail. In general, the following happens: you select the cycle you need, set the temperature you want, the machine washes everything as it should, but when it gets to the spin cycle, it doesn’t spin it, and what’s more, a lot of water remains in the tank. Here, people panic and start running to the workshop, and when you ask them in what position they washed, the answer is the same. After a short explanation, the man begins to ask why the hell she needs him. The answer to this question can only be given by the manufacturer, and I can only suggest which modes our housewives do the most laundry.
- Main wash- Synthetics at 40-60 degrees, the cycle lasts from 1:10 to 1:40, depending on the selected temperature. In principle, any laundry can be washed
- Casual- As in the previous paragraph, you can wash any linen. It lasts about an hour
- Wool- By its name it is already clear that you need to wash here, washing is designed for 50-60 minutes
- Cotton- The longest cycle involves washing at 90 degrees, which I do not recommend doing, I will explain why below. The process takes from 2 to 3 hours, depending on the selected temperature
- Rinsing- usually there are two rinsing cycles, lasting about 15-20 minutes
I have listed the main washes that our housewives use; there are, of course, additional functions, but as practice shows, very rarely anyone uses them, with the possible exception of the “Reduce time” button. Since the article is already very long, I cannot talk in detail about each additional function and each washing cycle, below you will see links where you can download instructions for almost every model of the Indesit washing machine, and now let’s talk about how to use your washing machine correctly
Correct operation of the Indesit washing machine
In this paragraph I want to list what should not be done and what should be done during operation of this equipment. Many argue with me about the temperature regime, and questions also arise about the spin cycle. I’ll try to explain something, and I’ll give some recommendations that can extend the life of your SMA
- Wash as little as possible and at temperatures above 70 degrees. The higher the temperature, the more scale there is on the heating element and in the washing machine tank. There is a relay on the control module that controls the process of turning the heating element on and off; it is the relay that often fails, since a large current constantly passes through it, by the way, the heating element itself is not happy with the constant operation. On this moment tanks on Indesit are made of carbolite, which do not withstand high temperatures very well. In addition, when washing at high temperatures, there is a serious load on the electrical network in your apartment or house
- After finishing washing, leave the hatch door ajar, also open the powder container a little
- The spin speed should not exceed 800 rpm, this will extend the life of the oil seal and bearings; if it is possible to spin at lower speeds, then do not hesitate to do so. It is important to understand here that the difference between 600 and 800 will not be very visible, but you will save a good resource for the machine
- Do not use cheap powders, they contain some alkalis that corrode the silumin crosses on the drum
- Be sure to put a rubber mat under the washing machine, this will reduce vibration and your washing machine will not wander where it wants. Of course, this should be done only when the SM has the habit of coming to say hello to you from the bathroom to the kitchen
- Provide a separate powerful outlet for the washing machine; I already wrote above that the washing machine consumes about 2.5 kW
- Raise the drain hose almost to the level of the top cover of the washing machine, this will help avoid self-draining
Download the operating instructions for the Indesit washing machine
Below you can download about 100 operating instructions for Indesit washing machines. I draw your attention to the fact that the entire manual is uploaded to Yandex disk. If you live in Ukraine, then I advise you to install a Yandex browser or an Opera browser with VPN support on your computer, there are a lot of instructions and transferring them from one file hosting service to another is very difficult, everything is checked by an antivirus. The entire manual is freely available, that is, you don’t have to pay for it or send any random sms. I won’t explain how to download a disk from Yandex, I think you are adults and know how it’s done, there’s nothing complicated here.
- Download instructions for washing machine indesit_isl_60_v_ex_
- Download instructions for washing machine Indesit_IWB_6085
- Download instructions for washing machine Indesit_IWB_6105
- Download instructions for washing machine Indesit_IWC_5083
- Download instructions for washing machine Indesit_IWC_6105
- Download instructions for washing machine Indesit_IWDC_6105
- Download instructions for washing machine Indesit_IWDC_7105
- Download instructions for washing machine Indesit_IWD_5085
- Download instructions for washing machine Indesit_IWD_5105
- Download instructions for washing machine Indesit_IWE_6105
- Download instructions for washing machine indesit_iwsb_5085_cis_
- Download instructions for washing machine indesit_iwsb_5085_cis__1
- Download instructions for washing machine Indesit_IWSB_5105
- Download instructions for washing machine indesit_IWSC-5105
- Download instructions for washing machine Indesit_IWSD_5085
- Download instructions for washing machine Indesit_IWSD_5105
- Download instructions for washing machine indesit_iwub_4105_cis_
- Download instructions for washing machine Indesit_IWUC_4085
- Download instructions for washing machine Indesit_IWUC_4105
- Download instructions for washing machine Indesit_IWUD_4085
- Download instructions for washing machine Indesit_IWUD_4105
- Download instructions for washing machine Indesit_IWUE_4105
- Download instructions for washing machine indesit_maxi_6_kg_wixl_105_ex_
- Download instructions for washing machine Indesit_PWC_7104_S
- Download instructions for washing machine Indesit_PWC_7104_W
- Download instructions for washing machine Indesit_PWC_7105_W
- Download instructions for washing machine Indesit_PWC_7108_S
- Download instructions for washing machine Indesit_PWC_7128_S
- Download instructions for washing machine Indesit_PWDE_7125_S
- Download instructions for washing machine Indesit_PWE_7104_S
- Download instructions for washing machine Indesit_PWE_7104_W
- Download instructions for washing machine Indesit_PWE_7107_S
- Download instructions for washing machine Indesit_PWE_7108_S
- Download instructions for washing machine Indesit_PWE_81472_S
- Download instructions for washing machine Indesit_PWE_8148_S
- Download instructions for washing machine Indesit_PWSC_5104_W
- Download instructions for washing machine Indesit_PWSC_5105_W
- Download instructions for washing machine Indesit_PWSC_6107_S
- Download instructions for washing machine Indesit_PWSC_6108_S
- Download instructions for washing machine Indesit_PWSE_6104_S
- Download instructions for washing machine Indesit_PWSE_6104_W
- Download instructions for washing machine Indesit_PWSE_6107_S
- Download instructions for washing machine Indesit_PWSE_6108
- Download instructions for washing machine Indesit_PWSE_6127_S
- Download instructions for washing machine Indesit_PWSE_6128_S
- Download instructions for washing machine Indesit_SISL_106
- Download instructions for washing machine Indesit_SISL_106_S
- Download instructions for washing machine Indesit_SISL_129
- Download instructions for washing machine Indesit_SISL_129_S
- Download instructions for washing machine Indesit_SIXL_106
- Download instructions for washing machine Indesit_SIXL_106_S
- Download instructions for washing machine Indesit_SIXL_126
- Download instructions for washing machine Indesit_SIXL_129
People usually face the question of how to turn on an LG, Indesit, Ariston or any other brand of washing machine when they purchase a brand new unit in a store or when they need to start washing on an appliance of a brand that they have not used before. Let's consider how to act in these two similar, but at the same time different situations.
Switching on the new device: installation in place
How to turn on a Bosch, Samsung, Ardo washing machine or a machine from any other manufacturer if you bought the model in a store and this will be your first time washing on the machine?
To begin, carefully read the instructions for the device. Machines of different brands (Samsung, Indesit, Bosch, Ariston and other brands) may have different instructions in the instructions for connecting and dismantling shipping parts. It is advisable not to ignore these instructions and connect the device according to the recommendations in the technical documentation for it. The general steps for connecting the device will look like this:
- The unit must be freed from packaging;
- All shipping fasteners are removed from the machine. Attention! Read the instructions which elements you need to remove from the device, because different models, parts can act as fasteners different types- bolts, screws, bars and so on. Typically, both bolts and screws are located on the back of the device body (photo);
- The machine must be installed in a pre-selected and prepared location. It is desirable that the floor surface in the selected location is hard and level. Do not place any additional materials at the installation site of the unit, except for a special mat that will reduce the intensity of vibrations during operation of the device.
After installing the unit in place, the legs of the machine are adjusted. Adjusting the height of the legs is necessary in order to achieve maximum stability of the device during operation.
To make sure that the device is set perfectly level, measurements with a building level will help.
Connecting a new machine: connecting the unit to communications
If you are interested in the question of how to turn on an Indesit, Ardo, Bosch or Samsung washing machine that you recently purchased in a store, you should understand that a full connection of the machine is impossible without connecting the device to utilities: power supply, water supply and sewerage.
The easiest way to carry out the connection work is if you place the device in an area where a washing unit was previously located and all the necessary connection points have been created: a drain into the sewer, a point with a hose for supplying water to the machine, there is an equipped and protected place for turning on the machine to the mains.
If the connection points have not been created, you will have to arrange them yourself:
- The appliance drain can be led into a bathtub or sink; to do this, a special hook is put on the end of the drain pipe of the machine, and then this hook is hooked onto the edge of the bathtub or washbasin. However, this connection option can hardly be called successful: after each wash you will have to thoroughly wash the plumbing fixtures. Therefore, it is better to connect the unit to the sewer directly, through a siphon;
- To connect the device to the water supply network, you will need to make a tap into the water supply and extend a branch for supplying cold water from the tap-in point to the machine.
- Also, to turn on and operate the device, you will need to connect it to the power supply. Usually, special sockets with an RCD and a separate automatic circuit breaker are used to connect machines.
You can see in detail the process of installing a washing machine and connecting it to communications in the thematic video instructions that complement the article.
If you have installed the machine correctly and connected it to the communications correctly, all you have to do is start the process of its operation. The next section of the article will tell you how to do this.
Turning on the washing machine correctly: preparatory stage
Information on turning on the machine will be useful both to those who are planning to start using a new device, and to those who do not know how to turn on the Indesit, Ardo or other brand of machine.
First, make sure that your faithful assistant is plugged in and that the water supply tap to the device is open. You can turn on the washing machine without water only in the spin mode, which does not require water. The spin mode can be turned on even in the sales area of a store if you want to check the device’s performance. How to turn on the spin cycle on a washing machine? It’s very simple, just select the appropriate button on the control panel or turn the lever to the desired pattern.
If the wash is a test (that is, you are doing it on a new device), you don’t have to put laundry in the drum of the unit. Close the drum door tightly. If the hatch door is not closed, the machine will not work. Pour powder into the detergent tray and add conditioner or bleach if desired. Watch the amount of powder! It should not exceed one hundred grams even with a large volume of washing.
All you have to do is start the workflow on the machine.
Starting the wash: how to turn on the desired function
Different machines have different control panels. Modern models are often equipped with electronic control panels, without levers. You need to select the washing mode on such a panel by pressing buttons.
Attention! Do not press the start or start button before selecting desired mode washing. The corresponding section of the instructions for the device will introduce you to the peculiarities of different washing modes.
You should also know that in some machine models you can wash on some specific program, but modern devices allow you to ideally set the parameters for washing a specific type of laundry.
Having selected the program, the spin speed, you can press “Start” - the machine will turn on and begin the work process.
Conclusion
Concluding the conversation about correctly turning on the washing machine, I would once again like to remind you of the benefits of reading and detailed study of the technical documentation for the device. In the instructions, the manufacturer gives useful and effective advice on both turning on the device and its proper operation.