Alinco 135 fx description amateur range. New technical features
The Alinco DR-135 FX car radio is made to the highest standards modern technologies and operates over a wide frequency range (from 136 to 174 MHz). Depending on the selected mode, the device display may display frequency parameters, channel number or its name. Other advantages of the model include the presence of a two-level dimmer, 100 programmable memory channels and protection against unauthorized activation.
Main functions of the Alinco DR-135 FX car radio
- Operating frequency range:
RX: 118-135.995 MHz (AM), 136-173.995 MHz
TX: 136-173.995 MHz - 100 programmable memory channels with alphanumeric labels
- Large 7 segment alphanumeric display
- Two indicator backlight modes
- Output power High 50W, Mid 20W, Low 5W
- Wide and Narrow modes 16K0F3E FM / 8K50F3E NFM
- Built-in CTCSS, DCS encoder + decoder, DTMF encoder
- Tone-burst - all selective calling standards accepted worldwide
- Clear audio sound
- ALARM function
- Cloning settings
- Burst mode at 1200 and 9600 bps with optional EJ-41U board
- The EMS-57 DTMF PTT allows direct frequency input in VFO mode and remote control of the Alinco DR-135 FX radio
- Ability to work in SmarTrunk II
- display the dialed number
- accelerated channel scanning
- extended work with subgroups
- 100 programmable memory channels
- Possibility of connecting a GPS receiver
- Dedicated channel for security alarm mode
- Operates in packet mode
- Five independent memory banks
Specificationscar radio Alinco DR-135 FX
| General characteristics | ||
| Operating frequency range | TMkIII: TX: 136-173.995MHz (FM) RX: 118-135.995MHz (AM) RX: 136-173.995MHz (FM) | EMkIII: TX: 136-173.995MHz (FM) RX: 136-173.995MHz (FM) |
| Modulation | 16K0F3E (FM) / 8K50F3E (Narrow-FM). Optional F1D/F2D/F3D | |
| Frequency grid step | 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz | |
| Number of channels | 100 channels + 1 calling channel | |
| Antenna resistance | 50Ω unbalanced | |
| Frequency stability | ±2.5ppm | |
| Microphone impedance | 2kOhm | |
| Supply voltage | 13.8V D.C.±15%, ground: minus | |
| Consumption current | Transmission: approximately 12.0A max., Receive: approximately 600mA max., 400mA SQL |
|
| Operating temperature range | -10...+60° С | |
| dimensions | 142 x 40 x 174mm | |
| Weight | about 1000g | |
| Transmitter | ||
| output power | 50W (High) 20W (Middle) 5W approx.(Low) |
|
| Modulation | Variable reactance | |
| Out-of-band emissions | -60dB or less | |
| Maximum deviation frequency | ±5kHz / ±2.5kHz (Narrow mode) | |
| Receiver | ||
| Scheme | Double conversion superheterodyne | |
| Sensitivity | -12.0dBu (0.25uV) or less (12dB SINAD) | |
| Intermediate frequencies | 1.21.7MHz 2.450kHz | |
| Squelch sensitivity | -16.0dBu (0.1µV) | |
| Selectivity(-6dB) | 12kHz / 6kHz or more (in Narrow mode) | |
| Selectivity(-60dB) | 28kHz or less / 16kHz or less (in Narrow mode) | |
| Audio Output Power | 2.0W (8 ohms, 10% distortion) | |
The Alinco DR-135T fixed radio station is a simple, modern car transceiver. Base station Alinco DR-135T provides ease of use thanks to the presence of a wide-screen LCD display with 3 operating modes. Standard car radio There is a PTT with a DTMF keyboard. In the Alinco DR-135 T portable radio, information about the status of the configured transmitter frequency is read from a backlit alphanumeric display. The Alinco DR-135 TA mobile radio uses 3 operating modes based on power characteristics: low medium, high level. The display of the Alinko DR-135 T radio is represented by a two-level gradation of illumination (bright/dim), in the dark you can adjust the optimal brightness of the light.
The Alinco DR-135T MK III portable radio station will delight users with its versatility and attractive price. The Alinco DR-135T transceiver operates in packet communication mode. The Alinco DR-135 T model belongs to the category of professional VHF stations with frequencies of 136-174 MHz. The Alinco DR-135T radio uses a reinforced housing, which ensures high reliability even in difficult operating conditions. The Alinco DR-135 T stationary radio has a large liquid crystal display with two-level backlighting that displays all the necessary information for the user.
Key performance characteristics of the Alinco DR-135 T transceiver
- Operating frequency range:
RX: 118-135.995 MHz (AM), 136-173.995 MHz
TX: 136-173.995 MHz - 100 programmable memory channels with alphanumeric labels
- Cloning settings
- Ability to work in SmarTrunk II
- ALARM function
- Output power High 50W, Mid 20W, Low 5W
- Wide and Narrow modes 16K0F3E FM / 8K50F3E NFM
- Built-in CTCSS, DCS encoder + decoder, DTMF encoder
- Clear audio sound
- Tone-burst - all selective calling standards accepted worldwide
- Large 7 segment alphanumeric display
- Two indicator backlight modes
- Burst mode at 1200 and 9600 bps with optional EJ-41U board
- EMS-57 DTMF PTT allows direct frequency input in VFO mode and remote control of the radio station
The portable Alinco DR-135T walkie-talkie has a built-in alarm function when an unauthorized attempt is made to turn on the transceiver. The Alinko DR-135T radio station uses an energy saving function. Also in the basic version there is a keypad locking function LOCK (lock), which allows you to prevent the user or another person from intentionally or unintentionally switching the channel.
The Alinko DR-135T car radio has a signal encoding/decoding function that allows you to eliminate unwanted listening on the air. The Alinko DR-135 TA portable radio station has a voltage control function on-board network car and the function of turning on/off the station with the car's ignition key.
OMNI functions in SmarTrunk II trunk systems
- Dedicated channel for security alarm mode
- Operates in packet mode
- extended work with subgroups
- 100 programmable memory channels
- accelerated channel scanning
- Possibility of connecting a GPS receiver
- display the dialed number
- Five independent memory banks
Technical characteristics of Alinco DR-135 T
| Model | Alinko DR-135 T | |
| Operating frequency range | TMkIII: TX: 136-173.995MHz (FM) RX: 118-135.995MHz (AM) RX: 136-173.995MHz (FM) |
EMkIII: TX: 136-173.995MHz (FM) RX: 136-173.995MHz (FM) |
| Modulation | 16K0F3E (FM) / 8K50F3E (Narrow-FM). Optional F1D/F2D/F3D | |
| Frequency grid step | 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz | |
| Number of channels | 100 channels + 1 calling channel | |
| Antenna resistance | 50Ω unbalanced | |
| Frequency stability | ±2.5ppm | |
| Microphone impedance | 2kOhm | |
| Supply voltage | 13.8V DC ±15%, ground: minus | |
| Consumption current | Transmission: approximately 12.0A max., Receive: approximately 600mA max., 400mA SQL |
|
| Operating temperature range | -10...+60° С | |
| dimensions | 142 x 40 x 174mm | |
| Weight | about 1000g | |
| Transmitter | ||
| output power | 50W (High) 20W (Middle) 5W approx.(Low) |
|
| Modulation | Variable reactance | |
| Out-of-band emissions | -60dB or less | |
| Maximum deviation frequency | ±5kHz / ±2.5kHz (Narrow mode) | |
| Receiver | ||
| Scheme | Double conversion superheterodyne | |
| Sensitivity | -12.0dBu (0.25uV) or less (12dB SINAD) | |
| Intermediate frequencies | 1.21.7MHz 2.450kHz | |
| Squelch sensitivity | -16.0dBu (0.1µV) | |
| Selectivity(-6dB) | 12kHz / 6kHz or more (in Narrow mode) | |
| Selectivity(-60dB) | 28kHz or less / 16kHz or less (in Narrow mode) | |
| Audio Output Power | 2.0W (8 ohms, 10% distortion) | |
Scope of delivery Alinco DR-135 T
- Radio station Alinco DR-135T
- Remote PTT
- Bracket for mounting in a car
- Power cable
- Technical description
- Package
The Alinco DR-135 FX car radio from the famous Japanese brand Alinco is manufactured using modern technologies, using the innovative RoHS method of circuit design adopted by the European Union. The high-strength housing ensures reliable communication in any difficult conditions. When operating the Alinko DR-135 FX station, you can select 2 different modes of receiving an FM signal: normal or narrow. Big g-k display /3 different display modes/, on which all the necessary information is clearly visible.
Functions and features of the Alinco DR-135FX radio
- Password to turn on the radio
- Wide and Narrow modes
- Built-in CTCSS, DCS
- Tone-burst - selective calling standards
- Copying-cloning settings, parameters
- Direct dialing of operating frequency
- Remote control station Alinco DR-135 FX
- SmarTrunk II - communication via walkie-talkie as on the phone
- Display the dialed number
- Advanced Channel Scan
- Connecting a GPS receiver
- Dedicated channel for burglar alarm
- Packet communication mode at 1200 and 9600 bps /add. board EJ-41U/
- 5 independent memory banks
- Turning on/off Alinco DR-135 FX with the car's ignition key.
|
136-173.995/ 118-135.995/136-173.995 MHz | |||
|
Exit power | |||
|
Frequency grid step |
5 to 50 kHz |
||
|
Total channels |
100 channels + 1 calling channel |
||
|
Voltage | |||
|
Operating temperature |
From -10 to +60° C |
||
|
Dimensions |
142 x 40 x 174mm |
||
|
Sensitivity | |||
|
Audio Output Power | |||
Description
Car radio Alinco DR-135 FX
Radio station Alinco DR-135 FX - designed for use in mobile radio networks. The Alinco DR-135 FX walkie-talkie has a large backlit LCD display, which has three different display modes, which displays all the necessary information. The ruggedized housing of the Alinco DR-135 FX will provide excellent reliability in any operating conditions.
The Alinco DR-135 FX radio station is one of the modern car stations. During operation by the user, select 2 different modes for receiving an FM signal: normal, narrow. The radio station has a function for monitoring the voltage of the car's operating network; the transceiver also provides the ability to turn the radio station on/off by turning the car's ignition key. The Alinco DR-135 FX base radio station allows you to encode and decode signals, thanks to this function it becomes possible to covertly communicate via radio on the air.
Advantages of the Alinco DR-135 FX mobile radio
- Operating frequency range: 136-173.995 MHz
- 100 programmable memory channels with alphanumeric labels
- Large 7 segment alphanumeric display
- Two indicator backlight modes
- Output power High 50W, Mid 20W, Low 5W
- Wide and Narrow modes 16K0F3E FM / 8K50F3E NFM
- Built-in CTCSS, DCS encoder + decoder, DTMF encoder
- Tone-burst - all selective calling standards accepted worldwide
- Clear audio sound
- ALARM function
- Cloning settings
- EMS-57 DTMF PTT allows direct frequency input in VFO mode and remote control of the radio station
On the front panel stationary radio station There is an alphanumeric backlit display, which indicates the operating frequency of the transceiver. The Alinco DR-135 FX transceiver has maximum power 50 watts, in addition, the radio has 3 operating modes based on power intensity. The liquid crystal display of the radio station is designed in the form of two-level illumination; the user of the radio can choose a bright or dim backlight mode for comfortable work in the dark.
As a functional feature in car radio Alinco DR-135 FX has a smooth selection of operating frequency (VFO) mode; it is possible to set the step: 5 kHz, 8.33 kHz, 10 kHz, 12.5 kHz, 15 kHz, 20 kHz, 25 kHz, 30 kHz, 50 kHz. The channel memory is represented by five memory banks, with a total number of about 100 frequency channels. The base station is equipped with OMNI functions that allow you to display the dialed channel number on the transceiver display. The Alinco DR-135 FX model has the functions of accelerated channel scanning, advanced work with subgroups, connection of a GPS receiver, a dedicated channel for the security alarm mode, making the Alinco DR-135 FX radio station multifunctional and practical.
The stationary model of the Alinco DR-135 FX radio station in the security section has an alarm when an unauthorized attempt is made to turn on. The program data cloning function allows you to transfer settings from one Alinco DR-135 FX station to another using a simple data cable, bypassing the connection of a PC or laptop.