Applications 

Install the program to turn on the disk. How to open a disk and flash drive on a laptop. Activating a service through the system registry

In the section on the question How to listen to an mp3 CD on a computer? what is needed for this? It's my first time. given by the author User deleted the best answer is You're all evil here. Baby, listen.
Press the CD tray button or DVD drive(whatever you have on the system unit), carefully place the CD on the “cup” of the tray with the mirror surface down, make sure that the disc is not skewed, press the tray button again (the disc will slide in). If you have XP or at least Windows 2000, then after the disk is initialized (it will spin up to amazing speed) a window will pop up. Select "Play". If the window does not pop up, then simply open the CD/DVD drive in Explorer and then double-click on any MP3 file. Everything will be revealed, everything will be listened to. Because, even if there is no Winamp, the MP3 files are compared with the standard Mazda Media Player. Use it!

Answer from I-beam[guru]
Insert it into the drive and listen!


Answer from First class[guru]
insert the disc into the drive
Wait
a menu will appear on the screen
select "play"


Answer from Alexei[newbie]
Head, hands and computer!!


Answer from Signal[guru]
Computer, CD, disk, mouse, speakers, ears and brain to perceive what is happening. 😎


Answer from Teacher_IKT[guru]
You may need a media player files - standard available in Windows


Answer from Galina Zaichikova[guru]
insert into the drive and listen


Answer from User deleted[active]
Wow))
you can listen through any player, for example winamp
if no one is installed, then there is a standard one
how to find: Start - Programs - Accessories - Entertainment - Windows Media Player
and you can enjoy the music
Good luck!!


Answer from Alexey Melnikov[guru]
for this you need at least to have columns, then you insert the disk into the CDROM, when the disk is initialized, a sign with possible options, choose to play the disc and listen to your health. You don’t need special programs for this because The player is built into Windows


Answer from Alfiya[guru]
twirl it on your finger

Disk drive
and Autorun on the computer

Sometimes, for various reasons, including due to
Windows errors, drive settings are lost
and Autorun.

It happens that they get so confused that the program
It even formats DVDs with recordings. Thereby
erases everything that has already been recorded on the DVD.
This was the case on my laptop.

It happens that formatting of a blank DVD begins
and it doesn't end. Sticks firmly. This happened to one
from the readers of this site.

In Windows OS – it is possible to change settings
Autorun and update drive configuration.


How to change AutoPlay settings

How to change
Autorun settings

To check and change settings:

Start → Control Panel → Hardware and Sound → AutoPlay.

The following window will open.

And you can check the settings.

Using the vertical scroll bar (on the right) you can
scroll down the page. To view other options.

(Click on the picture to enlarge)

To change the settings, you need to open the selection using the arrow (on the right).

If, let's say, you need to change the settings for
blank DVD - click on the arrow. A selection will open.


When Autorun crashed on my laptop, I
moment, in the Autorun settings, there was an item “Do not run
no action." With a prohibitory red sign. I changed
to “Burn files to disk using Explorer.” Can I have some more
set “Ask every time.”

After changing the settings, click the “Save” button at the bottom of the window.

If, after changing the settings, automatic
formatting the disc after you have inserted a blank DVD disc,
then you need to initiate disk formatting yourself.

To do this, click on the drive in the “Computer” folder to highlight it.
And then “File”, in the Explorer panel and select from the menu that opens
"Format".

In any case, it is necessary to format a blank DVD.
Without this, the program will not allow you to download files to disk.

How to update the drive configuration

How to update
drive configuration

If everything is in order with the settings or after changing the settings -
the problem with the drive remains, you can update the configuration
equipment.

The path to update the configuration is Start → Control Panel →
Hardware and Sound → in the “Devices and Printers” section, select
"Device Manager".

In the modern world of the Internet, where you can watch movies and listen to music online, as well as download any the desired program, the need for disks is gradually disappearing. But at the same time, users from time to time have a question about how to run a disk on a laptop. Before answering this question, it is worth noting that, in addition to DVD and CD-ROM disks, there are Windows boot disks and HDD laptop.

We launch the disk on the laptop

So, before you launch a disk on a laptop, you should find out whether the drive reads this format. To do this, look at the marked value on the drive: if the required format is not in the list, it means that it will not be read by the laptop equipment. To run the disk on a laptop, you must follow the following instructions:

  1. Press the Eject button of the drive to open it.
  2. We fix the disk in the spindle for fixation. It is important to install the disk with the correct side, otherwise it will not be readable. If the disk has an image, it cannot be installed face down. If it is double-sided, then its side is written closer to the hole of the disk (immediately taking into account that the bottom side will be read).
  3. We close the drive tray; on some models, you must first unscrew the disc.
  4. We wait until the disk is found by the laptop.
  5. Ready!

Now the user knows how to run the disk on a laptop. But if the disk is not readable and the user did everything correctly, this may be a sign of a device malfunction or damage to the disk surface. To check one of the problems, we launch another disk in the drive: if it is readable, then the problem is in the disk, if not, then it is in the equipment, in which case you should contact a technician.

How to run a Windows disk on a laptop?

To perform this action you must complete the following actions:

  1. Insert into the drive boot disk.
  2. Restart the device and enter the BIOS system. To do this, when loading the device, press the "Del" key (in the event that the user does not know which button is responsible for launch BIOS on his device, when starting the equipment, you need to look at the bottom of the screen; as a rule, the required key is indicated opposite the inscription “to enter setup”).
  3. Next, the user is taken to the BIOS menu. To perform actions in this window, you must use a laptop keyboard.
  4. Then select " Advanced BIOS Features".
  5. In the window that appears, select launch using CD-ROM.
  6. Then save the settings by pressing the F10 key.
  7. Next, the laptop will begin to reboot, and a window will appear with the inscription “Press any key to boot from cd or dvd”, press any key.
  8. In the installation window that appears, click “continue” and carry out the Windows installation procedure.

How to start a hard drive on a laptop?

If the laptop stops seeing the hard drive, then most often it’s all about the drivers. To update the driver, use the following instructions:

  1. Open the device manager: to do this action, in the search bar in the "start" menu we write "device manager".
  2. In the window that appears, select disk devices.
  3. Click right click mice to the equipment we need.
  4. Select “update drivers”.
  5. In the window that appears, click on the option in which the system itself will find the necessary driver and install it.

Finally

Practice shows that serious problems with launching disks on a laptop cannot arise. This article not only answers the question of how to start a disk on a laptop, but also how to start Windows and a hard drive.

is a portable computer. The same computer as a desktop one and it has the same parts, only smaller in size. That's why laptops are more expensive. It can be compared with mobile phone, A regular computer- with a regular home phone.

In order to open a disk or flash drive on a laptop, you need to insert them first.

Let's start with a CD or DVD:

Look at the laptop:

Either on the side or front there is a device for disks. It's called a CD or DVD drive.

To open it, you need to press the small rectangular button.

When you press this button, a click will be heard and the drive will slide out slightly from the laptop. Gently “help” him move out all the way. Then you need to literally “put” the disk on it, shiny side down, and “push” it into the laptop until it clicks.

After you have inserted the disc, wait 15 seconds: the disc may open on its own (this happens with discs on which movies and music are recorded). If this does not happen, open the My Computer icon. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:

Then double-click the left mouse button on the “CD drive” icon (can also be called CD-RW, DVD, DVD-RW drive).

What is recorded on the disk will open.

Now let's learn open flash drives. They look something like this:

In order to open a flash drive on a laptop, you need to insert it into a special hole:

You will find several of these holes either on the side or at the back.

After you insert the flash drive into one of the holes, open “My Computer” (let me remind you, it is either in “Start” or on the Desktop).

A new icon should appear there. For example, like this:

This icon is usually called " Removable drive" Double-click on it with the left mouse button. You will see what is written on the flash drive (files and folders).

Before removing the flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.

The message "Safely remove USB storage device" appears. Click on it once with the left mouse button. The message “Hardware may be removed” will appear. Now you can remove the flash drive from your computer.

Requirements.
The article is applicable for Windows 2000/XP/Vista.

Information
When you insert a disc into a CD/DVD-ROM, the disc autoruns by default. Those. if the disc is a music disc, then it starts playing automatically, if the disc is with a game, then the game installation interface appears, etc.

Enabling and disabling autorun of CD/DVD discs using the registry.
Execute";
regedit and click "OK";
3. In the "Registry Editor" window, on the left side, sequentially expand the specified registry sections to the subsection " cdrom":
HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\ Services\cdrom

4. Left click on the subsection cdrom and on the left side of the window find the option AutoRun;

5. Right-click on this option and select the menu item " Change";
6. In the "Value" field put 1 (enable autorun) or 0 (turn off autorun);


Enabling and disabling autorun of CD/DVD drives using group policies.

Windows 2000/XP.
1. From the "Start" menu, select " Execute";
2. In the "Open" field, enter the command gpedit.msc and click "OK";
User Configuration";
Administrative Templates";
5. In this folder, find and left click on the folder " System";

To disable autorun:
Disable autorun";
Properties";
8. Set the value " Enabled" and in the "Disable autoplay on" field, select " CD drives";
9. Click " OK";

To enable autorun:
6. On the right side of the window, find the policy " Disable autorun";
7. Right-click on this policy and select " Properties";
8. Set the value " Not specified";
9. Click " OK";

Windows Vista.
1. From the "Start" menu, select " Execute";
2. In the "Open" field, enter the command gpedit.msc and click "OK";
3. In the "Policy" section Local computer", find and expand (by clicking on the "+" sign) subsection " Computer configuration";
4. In this subsection, find and expand the folder " Administrative Templates";
5. In this folder, find and expand the folder " Windows components";
6. In this folder, find and left click on the folder " Autostart policies";

To disable autorun:
Disable autorun";
Properties";
9. Set the value " Enabled" and in the "Disable AutoPlay" field, select " CD drives";
10. Click " OK";
";
Properties";
13. Set the value " Enabled" and in the "Default startup behavior" field, select " Do not execute autorun commands";
14. Click " OK";

To enable autorun:
7. On the right side of the window, find the policy " Disable autorun";
8. Right-click on this policy and select " Properties";
9. Set the value " Not specified";
10. Click " OK";
11. On the right side of the window, find the policy " Default autorun option";
12. Right-click on this policy and select " Properties";
13. Set the value " Not specified";
14. Click " OK";