Official firmware for Samsung j3. Budget smartphone with a good screen - Samsung Galaxy J3 (2016). Firmware using third-party program Odin

30.11.2020

Model: PDA Version: J320FXXU0AQE2 CSC: J320FOXE0AQC3 OS Version: Android Lollipop 5.1.1 Regions Multi-regions Build Date 24.05.2017 Changelist 8862653

Choose The Flash File For Another Country

Great news if you have The Samsung Galaxy J3 (2016) SM-J320F is currently receiving a new security software update. Samsung is rolling out a new update that installs the May, 2017 security patch on the device. If you own one, you should be notified of the update very soon. The update is being delivered over-the-air and carries the build number J320FXXU0AQE2. As already mentioned at the start, the update installs the May, 2017 security patch, and that’s about it.
Download firmware for the Galaxy J3 (2016) SM-J320F. This firmware has version number PDA J320FXXU0AQE2 and CSC J320FOXE0AQC3. The operating system of this firmware is Android 5.1.1 Lollipop, with build date May 24, 2017. and Security patch date is May, 2017 security patch, with changelist 8862653 released for Russia,.
if you don"t receive a new security software update firmware J320FXXU0AQE2 for your Samsung Galaxy J3 (2016) model SM-J320F here on site we will show you how you can do that to install a new security software update J320FXXU0AQE2 Follow us.

How to check Complete Model SM-J320F and Current Firmware

Go to Settings
Than Tap on About
Here you can see Model Number: SM-J320F
For example: SM-J320F
For example: Android Lollipop 5.1.1

All Country have got Update J320FXXU0AQE2 for Samsung Galaxy J3 (2016) SM-J320F

Below You"ll Find All Country have got Update J320FXXU0AQE2 for Samsung Galaxy J3 (2016) SM-J320F so Far This list is updated favorably When a country gets the update it is added in its moment.

This is the only "state" area that has been updated so far

Warning

This is a warning from site that this Guide / tutorial is only for Galaxy J3 (2016) SM-J320F only. Please do not try this guide in any other Android devices, it will work only with Galaxy J3 (2016) SM-J320F.
First, you need to check your device model number in: Settings » About (there you find your device name). And also note that we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk.
If you follow our instructions as it is which is stated below, it is very unlikely that your device will be damaged and above of all your Smartphone must be factory unlocked.

Step 1: Download firmware update J320FXXU0AQE2 to Galaxy J3 (2016) model SM-J320F

Below you will find the direct link to download J320FXXU0AQE2 the 05/01/2017 Android security patch on Galaxy J3 (2016) model SM-J320F android Lollipop 5.1.1.

Keep Mind! You can download files up to 2GB in free mode you will need to Upgrade to premium if the firmware file more than it.

Country

Mirror one

Mirror tow

More Updates and Related Posts

After the download you will have a zip file under name: like J320FXXU0AQE2-xxxxxxxxxxx.zip now all you need to install and update the new firmware on Galaxy J3 (2016) model SM-J320F will find in Instructions below just dont forget to take a Backup to all data on your phone.

Step 2: Installing Official Firmware J320FXXU0AQE2 Android Lollipop 5.1.1 on Galaxy J3 (2016) model SM-J320F through Odin

Remember: This guide is to Install latest update J320FXXU0AQE2 update on Galaxy J3 (2016) model SM-J320F .
Your device must have 70% Of battery.
You need a Laptop or PC to perform this Action.
You should be using Stock Firmware and not Custom ROM
Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
Make sure you have followed the steps properly. Don't Skip and Read! – We are not responsible for any damage that you make to your Phone.

DOWNLOAD THE FILES THAT REQUIRED:

Download and Install the Samsung Kies Software:
Download and Install the Samsung USB Drivers:
Download and Extract the ODIN ZIP file on Desktop:

IN Samsung video Galaxy J3 2016 firmware, an easy way to flash it is shown. Flashing a Samsung Galaxy SM-J320 smartphone using a computer and the Odin program. Easy and step-by-step instructions for Android firmware https://youtu.be/RqJjNSPGIgs. There are many reasons for flashing, there may be different problems Android. Samsug Galaxy firmware, if: the phone is frozen, a virus in the smartphone, glitches, Android failure, phone bug, phone is overloaded, Samsung is frozen, Samsung firmware, samsung galaxy j3 sm j320f firmware, phone glitch, Android error, android error phone, samsung phone errors, samsung j3 is overloaded, samsung virus, android virus, samsung firmware, official samsung galaxy firmware, samsung galaxy 3 firmware and other problems with samsung. Before installing the firmware it is necessary. Download Samsung drivers, download the firmware, install Samsung Kies 3 on your computer. Samsung Kies 3 is a manager for managing and connecting a smartphone to a computer. Samsung Kies can be downloaded from the Samsung website. Odin 3 flasher program. I recommend saving all files in the root in one folder, and without Cyrillic (Latin characters). Program One has 4 firmware items. Often called 4-file Samsung firmware. If the smartphone does not turn on at all, then use all 4 points; in our case, the problem is not serious, and we will use one point. We select AP and specify the firmware path, the program processes the firmware. In the Options tab, check the “Auto-Reboot” and “Quick Reboot” checkboxes. The remaining points are free. Turn off the phone; if it does not turn off, remove the battery. Press the “home” button, the “volume down” button and the “power” button. The firmware menu appears; to confirm, press the “volume up” button. Then we connect the device to the computer. The computer should see the smartphone. After the “One” program identifies the smartphone, click “start” or “start”. Having previously checked the correctness of the model J320 (J3 2016). The program will display the firmware process, the same firmware scale will be on the display. After successful firmware The message “success” will appear. The Samsung logo will appear. After which you can disconnect your smartphone from your computer. This completes the Samsung j3 2016 (sm-j320) firmware. The firmware was completed successfully. In this way you can update the firmware of other Samsung models. That is, Android firmware. Playlist firmware https://www.youtube.com/playlist?list=PLxIoRRosrupgWZlG538HlGKwHzB_HYTm_ Samsung Galaxy j3 firmware I hope it was useful to you. #firmware #firmwareandroid #firmware #how to flash #firmwarevideo #xiaomi firmware #firmwaresamsung #firmwareupdate

Galaxy J3 SM-J320 with new official or custom firmware. Getting Root superuser rights to Samsung Galaxy J3 SM-J320, installing custom recovery TWRP Recovery.

Installing official firmware on the Samsung Galaxy J3 SM-J320 smartphone using service program Samsung Odin. In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download latest Official firmware for Samsung Galaxy J3 SM-J320F | Samsung Galaxy J3 SM-J320H | Samsung Galaxy J3 SM-J320G

Or you can download custom firmware for Samsung Galaxy J3 for example - SAMSUNG J3 SM-J320

Before flashing your phone's firmware, you first need to decrypt it.
To remove the lock from the Samsung Galaxy J3 SM-J320, you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.

Option 1: On the device, open “Settings”> “Backup and reset”>” Account»> “Reset data”> “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes - delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware.

After you have downloaded everything, unpack the previously downloaded archive with the driver for the Samsung Galaxy J3 SM-J320 and install it. Then unpack the archive with Odin and the firmware.
Run the Galaxy J1 Odin firmware program as administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the “BL” field
The AP……….tar.md5 file is inserted into the “AP” field
The file CP……….tar.md5 is inserted into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field

We check that only the “Auto Reboot” and “F” fields are checked. Reset Time"

We translate samsung phone Galaxy J3 SM-J320 in firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the included USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program.

Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J3 SM-J320

Install Samsung Drivers on your PC (you can download it above) and then connect using standard USB cable, your smartphone to your computer. After the PC recognizes the phone, additional drivers and updates will be automatically installed.

We will need the Odin 3 program, download Odin
Then download the custom recovery for Samsung J3 SM-J320- TWRP Recovery or Google Drive Mirror for TWRP DISCLAIMER: I rarely use Google Drive to share files for public access, because quite often there is an error when downloading (BANDWIDTH or “Download limit reached”), so if you cannot use any of the communication lines, try downloading again the next day.

Turn on your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to boot into this mode by pressing the “Volume Up” key.

Switched phone to Odin Mode, connect to PC
Run the Odin 3 flasher program on your PC as administrator
In the AP line, indicate the path to the previously downloaded file with custom recovery TWRP Recovery and select it
Uncheck “auto reboot” and press start (the phone should be flashed, flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);
We do not touch the Smartphone until the firmware process is complete; usually the firmware does not last longer than 30 seconds.
Without turning the gadget into working mode, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, when the Samsung message appears, release the buttons).

All! We rejoice.

Installing custom firmware on Samsung Galaxy J3 SM-J320

To install custom firmware on a Samsung Galaxy J3 SM-J320 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like, for example - CM-13.zip

Then copy the firmware file to the phone's memory. Then turns off the smartphone and boot into custom recovery TWRP Recovery (with the phone turned off, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file:

Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing “Swipe to Wipe”
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in recovery, select the Reboot -system item and the device will begin rebooting. Ready! You have successfully requested custom firmware! reboot your smartphone.

If you are wondering how to flash samsung smartphone Galaxy J3 SM-J320, then I offer your detailed step by step instructions by updating the Samsung Galaxy J3 SM-J320 smartphone to new official or custom firmware. Receipt Root is right superuser on Samsung Galaxy J3 SM-J320, installing custom recovery TWRP Recovery.

Installing official firmware on the Samsung Galaxy J3 SM-J320 smartphone using the utility program Samsung Odin. In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download Latest Official Firmware for Samsung Galaxy J3 SM-J320F | Samsung Galaxy J3 SM-J320H | Samsung Galaxy J3 SM-J320G

Or you can download custom firmware for Samsung Galaxy J3 for example – SAMSUNG J3 SM-J320

Option 1: On the device, open “Settings” > “Backup and reset” > “Account” > “Reset data” > “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware.

After you have downloaded everything, unpack the previously downloaded archive with the driver for the Samsung Galaxy J3 SM-J320 and install it. Then unpack the archive with Odin and the firmware.
We launch the program for Galaxy firmware J1 Odin as administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy J3 SM-J320 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful flashing, the device will reboot automatically and the message “Finish” will appear in the Odin program.

Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J3 SM-J320

Install Samsung Drivers on your PC (you can download it above) and then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be automatically installed.

We will need the Odin 3 program, download Odin
Then download the custom recovery for Samsung J3 SM-J320- TWRP Recovery or Google Drive Mirror for TWRP DISCLAIMER: I rarely use Google Drive for sharing files for public access, because quite often an error pops up when downloading (BANDWIDTH or “Download limit reached per day”), so if you cannot use any of the communication lines, try downloading again the next day.

Turn on your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to boot into this mode by pressing the “Volume Up” key.

Switched phone to Odin Mode, connect to PC
Run the Odin 3 flasher program on your PC as administrator
In the AP line, indicate the path to the previously downloaded file with custom recovery TWRP Recovery and select it
Uncheck “auto reboot” and press start (the phone should be flashed, flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);
We do not touch the Smartphone until the firmware process is complete; usually the firmware does not last longer than 30 seconds.
Without turning the gadget into working mode, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, when the Samsung message appears, release the buttons).

All! We rejoice.

Installing custom firmware on Samsung Galaxy J3 SM-J320

To install custom firmware on a Samsung Galaxy J3 SM-J320 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like, for example – CM-13.zip