Each time you start, TeamViewer, for security reasons, generates a new A temporary password For remote control. This password is quite inconvenient to use if only you control it and quite often, since every time you restart the computer you have to remember a new one. For such cases, TeamViewer has implemented an uncontrolled access function, which allows you to set an additional permanent password that is known only to you and does not change across reboots.

Install personal password you can by clicking on the "Connection" menu and selecting "Set up uncontrolled access" or by clicking on the personal password entry area in the program interface.

In the uncontrolled access settings window that opens, click “Next”.

Now, you need to enter your personal password twice to remote access to TeamViewer. Remember, the password should not be light so that attackers do not gain access to your computer.

The last step will ask you to create or join an existing account by entering your email and password, or you can refuse to create an account by selecting the appropriate option.

TeamViewer is used for remote connection to the computer and is widely used throughout the world for assistance, administration and problem solving. Most often, users launch the program manually to get help and turn it off after solving the problem. About it . But in this article we will look at how to set up uncontrolled remote access to a computer using TeamViewer.

Why is this necessary?

You will need permanent access if you need to systematically connect to your computer, but there is no one there to launch TimViewer manually. Or if you just don’t want to distract a person and wait for the program to launch on the other side every time.

Benefits of uncontrolled access in TeamViewer

1. TeamViewer is always running. The service is installed on the computer and there is no need to launch the program manually.

2. To connect, you use a permanent password that you choose yourself (and not a dynamic one, as is the case when starting the program manually).

Step-by-step instructions for setting up Unattended access

Download the program from the official website teamviewer.com.

Run the downloaded file.

Set the switches to the following positions:

• Install to then manage this computer remotely;
• personal/non-commercial use

and press Accept - complete:

The Uncontrolled Access Setup Wizard will launch. In the first window, click Further:

Select a custom name for your computer, enter a password and confirmation. Click Further:

If you want, you can create a TeamViewer account. This will allow you to add computers to your contacts list. But this is not necessary and you can select the item I don't want to create an account... and press Further:

Copy your computer ID and click Ready:

Now you can connect to your computer using both its ID and the password you set:

You do not need to enter the computer name to connect!

Now you can always connect to your computer using its ID and your permanent password. You just need the computer to be turned on and connected to the Internet.

TEAMVIEWER2015

License type:

Quacked

Languages:

Windows 8, 8 64-bit, 7, 7 64-bit, Vista, Vista 64-bit, XP, XP 64-bit

Downloaded:

How to set up TeamViewer

TeamViewer is a convenient tool for those cases when you need to remotely connect to your home or work computer or remotely help a friend. In general, there can be many different reasons. Particularly pleasing is the fact that there are no problems with the firewall. You can always easily connect to the required computer and the security system is not an obstacle. In order to use TeamViewer, of course, you need to download it. Downloading must be done only from the official website. There are several reasons for this. The main reason is the possibility of downloading virus software. The program is paid and most people spare money to buy it, but the stingy pays twice. Downloading from torrents is a big risk. If you need TeamViewer not for work (administrating your organization’s computers, server maintenance, etc.), that is, you will use it for non-commercial purposes, then you can download it for free.

What not to do when using the program non-commercially:

1. Connect to home computer from the worker.

2. Connect from home to an office PC.

If you do not strictly adhere to these simple restrictions, there is a chance that the program will detect commercial use and impose a number of restrictions on use.

How to install TeamViewer 9?

Download the software from the resource “teamviewer.com/ru/” and run the file. The following will appear on the monitor screen:

Select Personal/Non-Commercial Use. Click “Accept – Complete”. You will have to wait a while until the installation completes.

After the installation is complete, a special window will appear on the screen, which allows you to familiarize yourself with tips on using the program.

Ignore the window and close it by clicking on the button at the bottom right. Next, TeamViewer will launch. Now you can work.

Setting up and using TeamViewer!

You can only connect to computers that also have TeamViewer installed. This can be done immediately after its launch. The required data is a password and a unique computer number (ID) with which the connection is established. They can be viewed on the left side of the main program window.

To establish a connection to your PC, tell your partner your password and ID.

When connecting to a computer located at home using TeamViewer, you need a “personal password”, which will be discussed below.

For now, let's consider the option of connecting your computer to someone else's, for example, to a friend. As soon as he tells you the password and ID of his machine. Enter the data in the field called “Partner ID”.

Click "Connect to partner". A few seconds will pass and a window will appear in which you enter the password.

Enter your password and click on the “Login” button. Now you are taken to the remote PC.

The screenshot shows that a connection was made to a computer with an operating system Windows system XP.

What actions can you perform on a remote computer?

You can work as if you were on your own personal PC. Sometimes, of course, there are restrictions set on the remote machine. It depends on the program settings.

The absence of wallpaper on the desktop of the remote computer is immediately noticeable. TeamViewer disables wallpaper by default. If you make changes to the settings, the wallpaper will be saved. Go to settings and select “View” from the menu at the top.

You need to select “Hide Wallpaper” from the list. Now the wallpaper is in place on the remote computer.

Another one useful setting TeamViewer allows you to reboot a remote machine. Moreover, after switching on, you can continue working further. It is very comfortable. When setting up your PC, you may need to restart it several times. For example, after making a change in the msconfig utility, you can remotely reboot the machine and continue configuring it.

To reboot, go to the menu and select the “Actions” tab, then “Remote reboot” and then “Reboot”.

When the remote reboot of the PC begins, you will need to choose from two actions.

Click the “Reconnect” button. The connection to the remote machine was established, and no password was required.

There is a safe reboot option. To do this, follow the steps described just above, only select the “Reboot in Safe Mode” item. This option gives you access to your computer in safe mode.

You can also use the following options:

Blocking the input means of the remote PC

This allows you to deprive the owner of a computer connected remotely from the ability to perform any actions on his PC. It is completely locked for the owner. You can perform any manipulation and the owner of the computer will not be able to do anything. He will only have to sit and watch your work.

Enable PC lock

A very convenient feature when connecting to a home computer. When you finish work, you can log out of the system in such a way that no one can use the machine under your account.

Launch Task Manager

It can be done from the same tab by sending a request. You can also enable the ability to send keyboard shortcuts to a PC connected remotely.

Ability to transfer files to TeamViewer

This opportunity is very important. Let's take a closer look. The file transfer window opens from the top panel in the “file transfer” tab.

In the window that opens, on the left are files available on the local PC, that is, on your computer, and on the right is a dialog for the remote computer. It is possible to send and receive files from a remote computer. This can be done in two ways, namely, by dragging with the mouse or clicking the buttons at the top “Receive” or “Send”. It's pretty easy. Available in file transfer mode the following actions:

The screenshot shows that the log shows everything that happens in this mode:

What is transmitted

Where does it go?

What directories are viewed by a person connected to a computer.

This file transfer technology is extremely simple, and there is nothing more to add here.

How to connect to your home computer using TeamViewer

At first glance, there are no difficulties here. You can launch the program and go about your business, and, if necessary, connect from anywhere to your home PC.

This method is correct, but very convenient, since you will have to constantly launch TeamViewer and keep the password in memory.

Most best option- This is a TeamViewer setup with a permanent password to access your home PC. This will eliminate the hassle of remembering your password. In addition, after setting a permanent password, the program will be minimized to the system tray. Which you agree is very convenient.

Go to the menu of the main TeamViewer window and select “Connection” and “Set up uncontrolled access”. This will open the setup wizard.

Read the description, and then click “Next”.

Be sure to complete all fields at this stage. You don’t have to change anything in the “computer name” field, or you can put “Name”. In the “password” field you need to enter the one you created strong password, consisting of at least six characters.

No need to register. Just check the box next to “I don’t want to create account..." and click "Next".

When completing the permanent password setup step, be sure to remember or write down your password and unique ID.

As soon as you have completed all the manipulations in the settings, TeamViewer, when you click on the cross, will no longer turn off, but will be minimized in the tray while waiting for a connection.

Do not confuse a permanent password with an automatically generated one.

The permanent password must be strictly confidential information, just like for a webmoney or Email. You should use this password when you specifically need to connect to your PC. If you need to allow guest access to another person, then give him the password generated by the program. When the session ends, generate a new one.

The job is complete and you can connect with your unique password to your computer. The main thing is to remember your ID.

Conclusion

Key points on the operation of the TeamViewer program are discussed. After reading the article, you will easily set it up and be able to use it at a basic level. Use virtual machine to understand how the program works if there is no opportunity to try it in action.

TeamViewer is one of the best programs to set up remote access between computers. Its main advantages include simplicity and accessibility. The connection is established in literally two steps: first you need to specify the partner ID, and then the password. And there are some nuances here, which will be discussed below.

As you can easily notice, every time you start the program, it generates New Password to access your computer. On the one hand, this increases security, because old combinations become inactive. On the other hand, this creates difficulties when regularly using the program on several PCs.

Is there a way to configure TeamViewer so that the password does not change? The answer to this question will be positive. The article will discuss the most convenient method for ordinary users.

Setting up the program

First you need to change the Timweaver settings on the computer to which you will connect. Launch the remote access program on it. It is not necessary to log into your account. Open in the tools menu "Connection".Next, select “Set up uncontrolled access...”. In the pop-up menu, click "Continue". Set a permanent password for TeamViewer, re-enter it and click LMB on the continue button.
Confirm the action in the window that appears. Now the program will prompt you to link an existing account to this computer or create a new one. You can skip this step; it is not required. To do this, select the option "I don't want to create..." and click "Continue".
Finally, you will be shown the ID of the current PC, which is necessary to access it. Just click "Complete".

Connection

With how to set a permanent password in TeamViewer, everything became obvious. All that remains is to figure out the procedure for connecting to a remote computer. First you need to install and run the program for the main PC. Pay attention to the block "Manage your computer". In field « Partner ID" you need to enter the identification number that was displayed in the previous step.
Next, you need to specify a fixed password and click "Login". Remote access on this can be considered fully configured.

Important: You do not need to have TeamViewer running on your computer to be able to connect to it. There is a special service for remote access.

It is very convenient if you need to provide remote assistance to a friend or connect to your home computer at a time when you are not at home, but access to it is simply necessary for some reason! The good news is that there will be no problems with the firewall, since connecting to the computer will always work and no firewall will interfere.

Before you start using TeamViewer it naturally needs to be downloaded and the program must be downloaded from official website, I’ll explain why.

TeamViewer is, of course, a paid program and when people hear about it, some of them try to find cracks, download it from torrents and others. Should not be doing that, You risk downloading a virus, Trojan and other malware onto your PC!

TeamViewer, you can use for free, only if the program is used for non-commercial purposes. That is, this is what we need, we are not going to remotely maintain servers or administer computers of some company, right?

Here are some things you should not do if you are using the program for non-commercial purposes:

1) Connect to your office/work PC from home.
2) Connect from your work PC to your home computer.

That's basically it! You should not do this, because if the program considers that it is being used for commercial purposes, then significant restrictions will be imposed on its use!

After downloading the program from the official website “teamviewer.com/ru/”, run the downloaded file. A window will appear:

In this window you need to check the box “ Personal/non-commercial use" and press the button " Accept – complete"Now we just have to wait for the installation to complete.

As soon as the installation of the program is completed, by the way, you won’t have to wait long, a window with brief tips will appear.

Ignore this window, as this will be discussed below in more detail. Click the Close button in the lower right corner. Now TeamViewer itself will start and it is ready to work.

How to set up TeamViewer and how to use it!

After starting the program, you can immediately connect to a remote computer (naturally, if TeamViewer is also installed on it). To connect, you need to ask the owner of the PC for the unique number of his computer “ID” and password.

It’s easy to find out the connection information; the id and password are located on the left side of the main program window.

Respectively, if you need someone to connect to your PC, then you must tell your partner your ID and password.

If you want to use TeamViewer to connect to your home PC, then you need to use a “personal password”; there will be a separate discussion about it below.

In this case, we will consider the option when you need to connect to another computer, for example to a friend.

When you know the ID and password of the remote machine, enter the ID in the “Partner ID” field

Click the “Connect to partner” button, now after a few seconds a window for entering a password will appear.

Enter the previously received password into it and click the “Login” button and you will be taken to the remote computer.

As you can see in the screenshot, I connected to a computer running Windows XP.

What can we do with remote computer ?
Absolutely everything you can do with your own computer. If not, not any restrictions from the remote computer. Let's talk about some features and settings in more detail.

As you may have already noticed, there is no desktop wallpaper on the remote machine - this happened due to the connection, since by default TeamViewer disables the wallpaper, but the settings can be changed and the wallpaper will be displayed as before.

To display the wallpaper, select “View” from the menu at the top.

In the list below, click on “Hide Wallpaper” and now the wallpaper will be displayed on the remote machine.

Concerning other interesting TeamViewer settings, then it’s worth noting that when working with a remote computer it you can reboot and continue working continue with him.

A very useful feature. We all know that when setting up a PC, sometimes it needs to be rebooted. For example, you made changes in the “msconfig” utility, now you can reboot remotely computer and continue configuring it further.

To reboot, select the “” tab in the top menu Actions»

The remote computer will now begin to reboot. You will be asked to choose one of two actions.

Click the button, “Wait for partner.” Now all you have to do is wait for the remote computer to reboot and TeamViewer to start on it. The following window will appear on your PC:

Click the button Reconnect" and you will again connect to the remote computer, but without entering a password.

In addition to the normal reboot, You can restart your computer in safe mode. To do this, you need to perform all the same steps, only select “Reboot” in the “Reboot” place.

In this case, you will have access to your PC in safe mode.

If necessary, from the same tab, you can use the following features:

Blocking the remote machine's input facility: in this case, the owner of the remote PC will be deprived of the ability to perform any actions on her own computer. The computer will be completely blocked for the owner. You can do whatever you want, and the owner of the PC will only have to watch your actions.

At the final stage of setting up a permanent password, remember your unique ID and, of course, your password.

After the settings described above, TeamViewer will not turn off when you click on the cross, but will simply minimize in the tray waiting for a connection.

Do not confuse a permanent password with one that is automatically generated.

Never tell anyone your permanent password, it’s the same as the password for your email or account somewhere in Yandex.Money. use this password only when you need to connect to your PC, and if you want to let another person in as a guest, tell him the password that the program itself generates, and after completing the session, generate a new one.

Now you can connect to your PC with your unique password, the only thing you need to remember is your ID.

As a conclusion;

Now you know how to set up TeamViewer and how to use it. The article discussed the key points for setting up the program; in the following articles on this topic we will also talk about how to set up TeamViewer. But already about such possibilities: how to use chat, how to record a video of your actions on a PC in TeamViewer and the most interesting thing, how to create a list of computers for quickly connecting to them.

If you do not have the opportunity to see the program in action, then use a virtual machine.